Air Brakes #2

Air Brakes Endorsement Test | Oklahoma 2024 #2 Page 2 of 4

Train for FREE online with our Oklahoma CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OK Class A/Class B driver license in 2024, practice as much as.. Read More

Train for FREE online with our Oklahoma CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OK Class A/Class B driver license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.

25
20
20
To Pass

7 . During a static leakage test, what is the maximum leakage rate that is safe for a double combination vehicle?

When performing a static leakage test on a double combination vehicle with air brakes, the leakage rate should be no more than 3 psi in one minute. If the air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.

8 . In a dual air brake system:

There are two air brake systems in a dual air brake system. The systems share a set of brake controls, but each system has its own tanks, hoses, and lines.

9 . Once the air tanks are at an air pressure level of 125 psi, the air compressor governor will:

An air compressor governor will stop the compressor from pumping air once the air tanks are at an air pressure level around 125 psi. This air pressure level is referred to as the "cut-out" level.

10 . Truck tractors with air brakes built on or after March 1, 1997 must have:

Truck tractors with air brakes built on or after March 1, 1997, and other vehicles with air brakes built on or after March 1, 1998, must be equipped with anti-lock brakes.

11 . To ensure normal stopping power, drivers of vehicles equipped with a front brake limiting valve should:

Some older vehicles have front brake limiting valves with "normal" and "slippery" settings. Setting a brake limiting valve to "slippery" reduces the vehicle's stopping power, so a driver should make sure the valve is in its "normal" position. Front wheel braking has proven to be effective in all driving conditions.

12 . During an applied leakage test, the maximum leakage rate for a double combination vehicle is ____ in a minute.

It is important to know the maximum air loss rate that is safe for your specific vehicle. A double combination vehicle should have a leakage rate no higher than 4 psi in a minute during an applied leakage test.

Wait, before you go

Ace Your Oklahoma CDL Written Test with our Guaranteed Cheat Sheet

See the exact questions that will be on the 2024 Oklahoma DMV exam.