Knowledge Test Class A #1
Class A Driving Test | New Hampshire 2026 #1 Page 7 of 7
Train for FREE online with our New Hampshire class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NH CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
43 . When braking while ABS is activated, you should:
Brake softer than you normally would.
In a vehicle equipped with an Anti-Lock Braking System (ABS), you should apply the brakes in the same manner that you would if you were driving without ABS.
44 . Cargo being transported should be checked:
Cargo should be inspected before beginning a trip, within the first 50 miles of the trip, and every three hours or 150 miles traveled thereafter. Cargo should be inspected every time the driver stops to take a break. The driver of a truck transporting cargo is responsible for the cargo being safely secured throughout the trip.
45 . If you are turning left where there are two available turning lanes:
You should use both lanes.
If making a left turn where there is more than one available turn lane, you should always choose to take the rightmost lane. Large vehicles often have to swing right to make left turns, so it is safer for you to have other left-turning traffic to your left. This will allow you to have the best possible view of other turning vehicles and will lower the risk of your vehicle colliding with them.
46 . Which of the following is a situation in which you may not need to slow down and be extra careful?
Where there is increased traffic
Situations in which you should slow down and exercise extra caution include when you are driving through work zones; on roadways where the pavement drops off sharply; near foreign objects on the road; on on- and off-ramps; and in heavy traffic.
47 . What should you do if the brake pedal does not build up pressure?
Pump the brakes.
If you lose pressure in a hydraulic brake system, one appropriate response is to shift down into a lower gear. This will help slow the vehicle.
48 . The controlled braking method is:
When the driver downshifts the gears to brake.
The method of controlled braking involves applying the brakes as hard as you can without locking the wheels. If you need to make large steering adjustments while using controlled braking, you should remove your foot from the brake pedal, steer, then reapply the brakes.
49 . How can a person check for a leak in hydraulic brakes?
Remove the rear wheel and listen for a noise when the brake pedal is depressed.
Check hydraulic brakes by pumping the brake pedal three times before applying firm pressure to the pedal for five seconds. The pedal should not move. If it does, there may be a leak or some other problem in the braking system.
50 . What should you do if your vehicle gets stuck on railroad tracks?
Walk down the tracks to look for an oncoming train.
If your vehicle gets stuck on railroad tracks for any reason, you should immediately exit the vehicle and walk away from the tracks. Contact the proper emergency authorities.
See the exact questions that will be on the 2026 New Hampshire DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2026 New Hampshire | Frequently Asked Questions
To obtain a CDL Tank endorsement in New Hampshire, you must first have a valid Commercial Driver's License (CDL). Next, study the relevant section in the NH CDL manual, then schedule and pass the tank vehicle endorsement knowledge test at a DMV office. A fee will be charged for taking the test and adding the endorsement to your CDL.
To obtain a CDL Tank license in New Hampshire, you must first have a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle endorsement test. This test covers knowledge on inspecting tank vehicles, driving tank vehicles, and safe driving rules. You must also be at least 21 years old for interstate driving.
While New Hampshire does not mandate specific training for a CDL Tank endorsement, having practical experience can be beneficial. However, it's crucial to study the Tank Vehicles section of the NH CDL manual. This will prepare you for the tank vehicle endorsement knowledge test, which you must pass to obtain the endorsement.
Yes, to get a CDL Tank endorsement in New Hampshire, you must pass the tank vehicle endorsement knowledge test. This is an additional written exam focused on the specific knowledge and skills needed for driving tank vehicles. It covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules.
The written test for the CDL Tank endorsement in New Hampshire covers various subjects related to tank vehicles. It includes understanding bulk tanks, inspecting tank vehicles, safe driving rules, handling high center of gravity, managing surge, and emergency procedures. The aim is to ensure you're knowledgeable and competent in driving tank vehicles safely.
The CDL Tank endorsement written test in New Hampshire focuses on knowledge rather than specific maneuvers. It evaluates your understanding of inspecting tank vehicles, driving tank vehicles, and recognizing high center of gravity and its effects. It also tests knowledge about bulkheads, baffles, surge, and how to handle leaks or spills.
Yes, drivers with a CDL Tank endorsement must adhere to specific rules and regulations. For instance, they must follow the hazardous materials regulations if their tank contains such substances. Also, they are required to take adequate breaks to avoid fatigue. Overloading the tank beyond its capacity is also prohibited. Violating these rules can lead to penalties or revocation of the endorsement.
No, a valid Commercial Driver's License (CDL) with a Tank Vehicle endorsement (N) is required to transport liquid or gas materials in a tank vehicle in New Hampshire. This applies to tank vehicles designed to carry liquids or gases with an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. Violating this rule can lead to legal penalties.
Yes, the CDL Tank endorsement can be added to your current commercial driver's license. It doesn't require a fresh application for a new license. However, you will need to pass the Tank Vehicle Endorsement Knowledge Test and pay the necessary fees. Remember, you must have a valid CDL to add any endorsements in New Hampshire.
Yes, handling hazardous materials with a CDL Tank endorsement in New Hampshire requires additional certification. You must obtain a Hazardous Materials (HazMat) endorsement. This involves passing a knowledge test, a TSA background check, and a fingerprinting process. It ensures you understand the safety procedures and protocols for handling hazardous materials.
