Knowledge Test Class A #2
Class A Driving Test | Nebraska 2025 #2 Page 5 of 7
Train for FREE online with our Nebraska class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NE CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
29 . If one-fourth of the leaves in a leaf spring are missing when a vehicle is inspected:
When inspecting a vehicle's suspension, you should look for broken or missing leaves in the leaf springs. Any defect of this kind is dangerous. If one-fourth or more of the leaves are missing from any leaf spring, the vehicle must be put out-of-service.
30 . If you doubt that you have enough space to safely drive under a bridge or sign, you should:
If you are not certain that your vehicle will fit under overhead objects, you should slow down and take a different route, if possible.
31 . When carrying a wide load, the driver should:
Drive on the shoulder.
Special permits are required for over-length, over-width, and/or overweight loads. They may also be subject to certain driving restrictions.
32 . Before entering a curve, you should:
Downshift.
Always downshift before entering a curve. Decreasing your speed before entering the curve will allow you to maintain better control over the vehicle throughout the curve.
33 . Which of the following is not an example of a distracted person that motorists should be worried about?
A person sitting on a bench waiting for a bus
You should be cautious when you are near people who are not paying attention to the road. Be wary of drivers who are engaged in conversation with passengers, children near the road, and road workers.
34 . If being tailgated, you should speed up.
If someone is tailgating you, it is a good idea to open up the space ahead of your vehicle to make it easier for the driver to pass you. Increasing your speed is not a good idea because the driver may continue to tailgate you at the higher speed, only increasing the danger.
35 . During the vehicle inspection test, you must be able to adequately check all of the following, except:
During the pre-trip vehicle inspection test, you will be asked to check the power steering, water pump, alternator, and air compressor belts, if the vehicle is equipped.
2025 Nebraska | Frequently Asked Questions
To acquire a CDL Tank endorsement in Nebraska, you must first have a Commercial Driver's License (CDL). Then, study the Tank Vehicle section of the Nebraska CDL Handbook. After studying, schedule and pass the Tank Endorsement written test at a Nebraska DMV office. The test generally covers material related to the safe operation of tank vehicles.
To obtain a CDL Tank license in Nebraska, you must have a valid Commercial Driver's License (CDL). You will then need to pass the Tank Vehicle Endorsement Test, which covers federal and state regulations for transporting liquid or gaseous materials. Lastly, you may be required to pass a driving test in a vehicle representative of the one you will be operating.
While Nebraska doesn't specifically mandate training or prior experience for a CDL Tank endorsement, it's highly recommended to undergo training to pass the Tank Vehicle Endorsement Test. This test covers specific rules and safety protocols for transporting liquid or gaseous materials. Some employers may also require specific experience or training before hiring.
Yes, in Nebraska, to obtain a CDL Tank endorsement, you must pass the Tank Vehicle Endorsement Test. This written exam focuses on federal and state regulations related to safely transporting liquid or gaseous materials. It covers topics like inspecting tank vehicles, safe driving, and handling emergencies. Preparation for this test is crucial for success.
The written test for the CDL Tank endorsement in Nebraska includes subjects such as inspecting tank vehicles, recognizing leaks, driving tank vehicles (including high center of gravity and surge), and safe handling and emergency protocols for liquid or gaseous materials. The test is designed to ensure drivers understand the specific safety requirements for operating tank vehicles.
The CDL Tank endorsement assessment specifically tests your knowledge on safe driving rules and procedures for tank vehicles. This includes understanding the vehicle's high center of gravity, managing surge, inspecting and recognizing leaks, and handling emergencies. However, unlike other endorsements, there is no separate skills or road test for the Tank endorsement; the knowledge is assessed through a written exam.
A CDL Tank endorsement allows a driver to operate a commercial motor vehicle designed to transport any liquid or gaseous materials within a tank. However, if the material is hazardous, the driver must also have a Hazardous Materials (HazMat) endorsement. Additionally, drivers are subject to federal regulations regarding hours of service, vehicle maintenance, and safety inspections.
No, it's illegal to transport liquid or gas materials without a valid CDL Tank endorsement in Nebraska. This endorsement is required for drivers who wish to operate a tank vehicle, which is defined as any commercial vehicle that is designed to transport any liquid or gaseous materials within a tank or tanks. Violation of this requirement can result in serious penalties.
The CDL Tank endorsement can be added to your existing Commercial Driver's License (CDL). You don't need to apply for a new CDL. However, you must pass the Tank Vehicle written test. After passing, the Tank endorsement will be added to your CDL, expanding the range of vehicles you're authorized to drive.
Yes, if you're handling hazardous materials with a CDL Tank endorsement, you also need a Hazardous Materials (HazMat) endorsement. To obtain this, you must pass a written test and a TSA background check. Also, you must follow federal safety regulations regarding transportation and handling of hazardous materials to ensure safety and prevent environmental damage.