FREE Tennessee CDL Practice Test 2024 - DMV Practice Test
Your understanding of traffic signs, signals, right-of-way rules, trucking legislation, speed limits, vehicle inspection, and basic commercial vehicle safety will be put to the test in order to assist you in becoming a safer driver today. The Tennessee Commercial Driver License Manual and applicable Tennessee legislation are the basis for each of our 50 multiple-choice questions. A tip and an explanation are provided for each question. It's a good idea to read the explanations for each question to learn more about the rule that's being assessed.
50
40
20
1 . What is the purpose of a vehicle inspection report?
It provides a plan for the next five trips.
A vehicle inspection report allows a driver to inform the motor carrier of issues that could affect the safe operation of a vehicle. If required, the driver should fill out a vehicle inspection report after every day of driving. They should make note of any issues that could affect the safety of the vehicle or that could lead to a mechanical breakdown.
2 . If being tailgated, you should:
If you are being tailgated, you should increase the distance between your vehicle and the vehicle ahead of you. This reduces the need for you to make sudden changes in speed or direction while making it easier for the tailgater to pass your vehicle.
3 . When checking your windshield wiper blades, the blades should be:
When inspecting your vehicle, you should check the wiper blades for damage, stiff rubber, and proper securement.
4 . When steering to avoid a crash, you should:
Speed up as you get nearer to the hazard.
When turning quickly to avoid colliding with a hazard in the roadway, you should always keep both hands on the steering wheel. You must have a firm grip on the wheel to be able to turn quickly.
5 . The suspension system:
Lightens the load for the tires.
The suspension system holds up a vehicle and its load while keeping the axles in place. Faults in a vehicle's suspension system are extremely dangerous.
6 . While driving downhill, you should brake until you reach a speed that is ____ below your safe speed, then release the brake pedal.
20 mph
While driving downhill, you should hold down the brake pedal until your vehicle reaches a speed 5 mph below your safe speed, then release the brake pedal. Repeat this process.
7 . A driver should ensure that:
It is essential to the safe operation of a CMV that cargo be properly loaded. Improper loading can affect handling and damage the vehicle. Additionally, improperly loaded materials can cause injury or death by falling off of the vehicle.
2024 Tennessee | Frequently Asked Questions
A CDL Class A license in Tennessee allows the holder to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the Gross Vehicle Weight Rating (GVWR) of the vehicle(s) being towed exceeds 10,000 pounds. It covers vehicles like tractor-trailers, truck and trailer combinations, and flatbeds.
A Class A CDL license in Tennessee allows the holder to operate vehicles such as tractor-trailers, truck and trailer combinations, flatbeds, tanker vehicles, and livestock carriers. It is typically used for long-haul or over-the-road (OTR) trucking. The license covers any vehicle with a GCWR of 26,001 pounds or more if the towed vehicle is over 10,000 pounds.
To obtain a Class A CDL license in Tennessee, you must be at least 21 years old (18-20 years for intrastate driving), possess a valid Tennessee driver's license, pass a vision test, and successfully complete both a knowledge test and a skills test. You'll also need to provide proof of citizenship or lawful permanent residency.
In Tennessee, you must be at least 21 years old to qualify for a Class A Commercial Driver's License (CDL) for interstate driving. However, you can obtain a Class A CDL for intrastate driving (within Tennessee) if you are at least 18 years old.
Specific endorsements are not required for a Class A CDL license, but they can expand your job opportunities. Endorsements allow you to operate specific types of vehicles, such as tank vehicles (N), passenger vehicles (P), school buses (S), or vehicles carrying hazardous materials (H). Each endorsement requires passing additional knowledge and/or skills tests.
The Class A CDL skills test in Tennessee encompasses three parts: a pre-trip inspection to confirm that your vehicle is safe to drive, a basic vehicle control test to demonstrate your ability to maneuver and control the vehicle, and an on-road driving test where you'll be evaluated on your interaction with traffic and adherence to safety rules.
Yes, there can be limitations on Class A CDL license holders. These are typically represented as restrictions noted on the license. For example, if you take your skills test in a vehicle without air brakes, you'll have an "L" restriction and can't operate vehicles with air brakes. Other restrictions can relate to medical conditions or the specific type of vehicle used for testing.
In Tennessee, the Class A CDL written test is primarily administered in English. However, some locations may offer the test in Spanish. It's important to note that all CDL holders must be able to read and speak English well enough to communicate with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, you can request accommodations for the Class A CDL written test if you have a disability. The Tennessee Department of Safety & Homeland Security is committed to ensuring accessibility for all test takers. You should contact them directly ahead of your scheduled test to discuss your specific needs and arrange appropriate accommodations.
If you don't pass the Class A CDL written test, you can retake it. However, you must wait at least one day before retesting. There's no limit on how many times you can retake the test, but each attempt requires a fee. It's advisable to study thoroughly before retesting to increase your chances of passing.