Passenger #2
Passenger Endorsement | Tennessee 2025 #2
Train for FREE with our Tennessee CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TN DMV passenger endorsement in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
20
1 . Cargo on flatbed trailers should be:
Pushed to one side.
On flatbed trailers or trailers without sides, cargo must be tied down to prevent it from shifting or falling off in transit.
2 . After a bus trip is completed, the vehicle:
Buses should be inspected at the end of every trip. Key safety items could have been damaged by passengers, so an inspection allows these damages to be repaired before another trip is made.
3 . When performing the stop/start maneuver as a part of the skills test, you should:
Decelerate smoothly.
During the on-road driving skills test, you will be asked to pull your vehicle over to the side of the road and stop as if you were going to get out and check something on your vehicle. As you prepare to make this stop, you must check traffic; activate your turn signal; decelerate smoothly with even braking, changing gears as needed; and bring your vehicle to a full stop without coasting.
4 . Carry-on baggage:
Bus passengers should not be allowed to leave baggage in any doorway or aisle. Baggage and freight must be secured in a manner that will prevent damage, allow the driver to move freely and easily, allow riders to exit by any window or door in an emergency, and protect riders from injury if the items fall or shift.
5 . Before starting a trip, you need to check the ____ to ensure that it is in proper working condition.
Parking brake
Before starting on a bus trip, you should verify that key vehicle systems are in proper working order. Your inspection should include a check of the parking brake, lights, and reflectors.
6 . What is Gross Vehicle Weight Rating (GVWR)?
The maximum weight allowed to be transported by a vehicle
Gross Vehicle Weight Rating (GVWR) is the value specified by the manufacturer as the loaded weight of a single vehicle.
7 . When crossing railroad tracks, you should:
Put the vehicle in neutral.
When crossing railroad tracks during the on-road driving skills test, you must not stop, change gears, pass another vehicle, or change lanes while any part of your vehicle is in the railroad crossing.
Search the best driving school in your neighbourhood
2025 Tennessee | Frequently Asked Questions
A CDL Class B license in Tennessee allows the holder to operate single vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, or any such vehicle towing another not exceeding 10,000 pounds. This includes buses, farm labor vehicles, and any vehicle designed to transport 16 to 23 passengers, including the driver.
With a Class B CDL license in Tennessee, you can operate single vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, or tow a vehicle not heavy than 10,000 pounds. It includes straight trucks, large passenger buses, segmented buses, box trucks, dump trucks with small trailers, and trucks with small trailers.
To acquire a Class B CDL license in Tennessee, you must be at least 21 years old (or 18 for in-state transport only), possess a valid Tennessee driver's license, pass a vision test, and complete a Commercial Driver License Application. You also need to pass a written knowledge test and a skills test which includes pre-trip vehicle inspection, basic controls, and on-road driving.
In Tennessee, you must be at least 21 years old to qualify for a Class B CDL license for interstate commerce. However, if you plan to drive only within the state (intrastate commerce), you can obtain a Class B CDL license at the age of 18.
While specific endorsements are not necessary to obtain a basic Class B CDL license, they can enhance your licensure. Endorsements certify you to drive certain types of vehicles or transport specific cargo. For instance, a passenger or school bus endorsement allows you to drive such vehicles, while a hazardous materials endorsement permits you to transport hazardous cargo.
The Class B CDL skills assessment in Tennessee includes three parts: a pre-trip vehicle inspection to verify that you can assess if your vehicle is safe to drive, a basic vehicle controls test to check your ability to control the vehicle, and an on-road driving test to examine your practical driving skills in various traffic situations and conditions.
Yes, Class B CDL license holders in Tennessee are limited to operating single vehicles with a GVWR of 26,001 or more pounds, or a towed vehicle not exceeding 10,000 pounds GVWR. They are not authorized to drive a Class A vehicle unless they upgrade their license. Endorsements may be required for certain types of vehicles like school buses or tank vehicles.
In Tennessee, the written Class B CDL test is generally administered in English. However, the state may offer the test in other languages. It's recommended to contact the Tennessee Department of Safety & Homeland Security for specific information on language availability for the written test.
Yes, in Tennessee, you can request accommodations for the Class B CDL written exam if you have a disability. The Department of Safety and Homeland Security works to ensure all testing materials and methods are accessible. You should contact your local Driver Services Center in advance to discuss your needs and arrange appropriate accommodations.
If you fail the Class B CDL written test in Tennessee, you can retake it. However, you must wait at least one day before attempting the test again. There is no limit to the number of times you can retake the test, but a fee applies each time. It's recommended to study thoroughly before retesting.
