Air Brakes #2
Air Brakes Endorsement Test | Colorado 2024 #2 Page 4 of 4
Train for FREE online with our Colorado CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a CO Class A/Class B driver license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
19 . If the low pressure warning light comes on while you are driving:
You should continue driving, but turn the emergency flashers on to warn other motorists.
If the low air pressure warning light turns on, you should stop and safely park your vehicle as soon as possible. Controlled braking will be possible only as long as enough air remains in the tanks.
20 . A low air pressure warning signal should activate:
In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.
21 . Dollies equipped with ABS are required to have malfunction lamps located where?
On the top
A dolly equipped with an Anti-Lock Braking System (ABS) is required to have a yellow malfunction lamp located on its left side.
22 . What does the air compressor governor do?
Controls the temperature of the air leaving the air storage tanks.
In an air brake system, the air compressor governor controls when the air compressor pumps air into the air storage tanks.
23 . Truck tractors with air brakes built on or after March 1, 1997 must have:
A rear back-up camera.
Truck tractors with air brakes built on or after March 1, 1997 must be equipped with Anti-Lock Braking Systems (ABS).
24 . To stop in a vehicle that uses air brakes, the driver should:
Pull the brake pedal up.
To make a normal stop in a vehicle with air brakes, push the brake pedal down. The harder the pedal is pressed, the more air pressure is released.
25 . What happens if the air pressure in a system's air tanks falls below 60 psi?
The vehicle should stop.
In an air brake system, a low pressure warning signal should activate if the pressure in the air tanks falls to a level below 60 psi. This signal may be in the form of a warning light or a wig wag.
See the exact questions that will be on the 2024 Colorado DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2024 Colorado | Frequently Asked Questions
To acquire a CDL Tank endorsement in Colorado, you must first hold a valid Colorado CDL. Then, you need to pass the Tank Vehicles endorsement test which covers the proper handling and inspection of tank vehicles. The test is administered by the Colorado DMV. Studying the Colorado Commercial Driver's Handbook will help you prepare for the exam.
To obtain a CDL Tank license, you first need a Commercial Driver's License (CDL). Then, study the Tank Vehicles section of your state's CDL handbook. You must pass the Tank Vehicles endorsement written test at your local DMV. Upon passing, the endorsement is added to your CDL. Always check specific state requirements as they may vary.
While specific training is not mandatory for a CDL Tank endorsement in Colorado, it is highly recommended to thoroughly understand the handling of tank vehicles. Experience is not required either, but you must hold a valid Colorado CDL and pass the Tank Vehicles endorsement test conducted by the Colorado DMV.
Yes, to obtain a CDL Tank endorsement in Colorado, you must pass the Tank Vehicles endorsement test. This written exam covers the specific knowledge needed for driving tank vehicles, including handling and inspection. The test is administered by the Colorado DMV and studying the Colorado Commercial Driver's Handbook can help you prepare.
The written test for a CDL Tank endorsement in Colorado covers topics such as inspecting tank vehicles, safe driving for tank vehicles, and understanding the effects of liquid surge on vehicle handling. It also includes the importance of baffle usage in tanks, and knowledge about different types of tanks.
The CDL Tank endorsement assessment doesn't involve a specific driving test or maneuvers. However, it evaluates your knowledge on safely handling tank vehicles. This includes understanding the vehicle's high center of gravity, managing liquid surge, conducting proper inspections, handling emergencies, and understanding the differences between various tank types.
Drivers with a CDL Tank endorsement must comply with strict safety regulations due to the potentially hazardous materials they may transport. They must understand how to control surge, inspect their vehicle, and handle emergencies. Additionally, they may need a Hazardous Materials (HazMat) endorsement if transporting hazardous liquids. Violation of regulations can result in endorsement suspension or revocation.
No, a valid CDL Tank endorsement is required to legally transport liquid or gas materials in Colorado. This endorsement ensures drivers have the necessary skills and knowledge to handle such materials safely. Driving without the proper endorsement can result in serious penalties, including fines and suspension of your commercial driving license.
The CDL Tank endorsement can be added to your existing Commercial Driver’s License. However, you will need to pass a specific knowledge test related to tank vehicles. Once you pass the test, the endorsement will be added to your CDL, and no fresh application for a new license is necessary.
Yes, there are specific regulations in place. For handling hazardous materials with a CDL Tank endorsement, you also need a Hazardous Materials (HazMat) endorsement. This involves passing a written test and a TSA background check. Also, you must follow FMCSA regulations for the safe transport of hazardous materials to prevent accidents and spills.
