Knowledge Test Class A #2
Class A Driving Test | Arkansas 2026 #2
Train for FREE online with our Arkansas class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AR CDL class A permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
1 . When driving in winter, which of the following should receive extra attention in a pre-trip inspection?
When doing a pre-trip inspection during the winter, you should pay extra attention to the coolant level and amount of antifreeze; the defrosting and heating equipment; the wiper blades and windshield washer; the tires and tire chains; the lights and reflectors; the windows and mirrors; the hand holds, steps, and deck plates; the radiator shuttles and winterfront; and exhaust system.
2 . When preparing to drive in the winter, be sure to check:
All of the above.
Before driving during the winter, make sure to check your defrosting and heating equipment, coolant and antifreeze levels, wipers and washers, tire tread, tire chains, lights, reflectors, and exhaust system. Clear ice and snow from all windows, mirrors, hand holds, steps, deck plates, and radiator shutters. Make sure the winterfront is not closed too tightly.
3 . When changing lanes, you should:
Quickly swerve your vehicle into the other lane.
Always check your mirrors and use the proper signal when changing lanes. Be sure there is enough space for your entire vehicle in the next lane before you begin moving.
4 . Mirror adjustment should be:
The adjustment of your mirrors should be checked prior to the start of all trips. Adjust your mirrors as needed.
5 . An Anti-Lock Braking System (ABS):
Anti-Lock Braking Systems (ABS) are compatible with air brakes and help a driver maintain control of their vehicle by preventing wheel lockup.
6 . If turning to avoid a hazard:
You should not brake while making a quick turn to avoid a hazard. Doing so could cause your wheels to lock and make your vehicle skid out of control.
7 . When starting a vehicle, the oil pressure should:
After starting a vehicle's engine, the oil pressure should come up to a normal level within seconds. Do not operate a vehicle if it has oil pressure that is low, dropping, or fluctuating.
See the exact questions that will be on the 2026 Arkansas DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2026 Arkansas | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Arkansas, you must first have a valid CDL. Next, study the Doubles and Triples section of the Arkansas CDL manual, then take and pass the Doubles/Triples knowledge test at your local DMV. Finally, pay the required fee to add the endorsement to your license. Be sure to check any other requirements from the Arkansas State Police.
To obtain a CDL Doubles/Triples license, you'll first need a valid Commercial Driver's License (CDL). You must then study the specific section for Doubles/Triples in the CDL manual. After studying, you'll need to pass the Doubles/Triples knowledge test at your local DMV. Lastly, pay the necessary fee to add the endorsement to your existing license.
While Arkansas doesn't mandate specific training for a CDL Doubles/Triples endorsement, it's beneficial to have hands-on experience. Studying the Doubles/Triples section of the CDL manual is essential. Passing the Doubles/Triples knowledge test at your local DMV is required. Some choose to attend a CDL training school for practical experience before attempting the test.
Yes, to obtain a CDL Doubles/Triples endorsement in Arkansas, you are required to pass the Doubles/Triples Knowledge Test. This test covers specific information related to handling, inspecting, and coupling/uncoupling double and triple trailers. It is an additional written examination beyond the basic CDL test.
For the CDL Doubles/Triples endorsement in Arkansas, there is no specific skills or maneuvers test. The endorsement only requires a knowledge test, which covers information such as coupling and uncoupling, inspecting doubles and triples, and the handling and stability of these vehicles. However, practical experience driving these types of vehicles can be beneficial.
No, it's not permissible to operate double/triple trailers without a valid CDL Doubles/Triples endorsement in Arkansas. The endorsement is required by federal law and ensures that drivers have the necessary knowledge and skills to safely operate such vehicles. Operating without the proper endorsement can lead to fines, penalties, and potentially the loss of your CDL.
You can append the CDL Doubles/Triples endorsement to your current CDL. You don't need to initiate a new application for a CDL. However, you will have to pass the Doubles/Triples Knowledge Test and pay the required fees to add this endorsement to your existing license.
Yes, there are some constraints for drivers holding a CDL Doubles/Triples endorsement in Arkansas. Drivers must follow federal size and weight regulations. Also, these vehicles are not allowed on some roads due to their size. Furthermore, drivers must have a good driving record and maintain their physical health to keep their CDL and endorsement valid.
In Arkansas, double trailers cannot exceed 81.5 feet in length, and triple trailers are not permitted. The maximum weight for any vehicle or combination is 80,000 pounds on Interstate highways. However, specific weight limits may vary depending on the axle number and spacing. It's crucial to check both state and federal regulations for precise requirements.
Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include maintaining a safe following distance, checking all connections regularly, and understanding the high rollover risk. Drivers must also be trained in coupling and uncoupling procedures, and understand the different handling required for these types of vehicles.
