Knowledge Test Class A #2
Class A Driving Test | Arizona 2025 #2 Page 4 of 7
Train for FREE online with our Arizona class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AZ CDL class A permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.
50
40
20
22 . When an engine is running, an acceptable oil pressure would be:
Operating oil pressure should be between 35 and 75 psi. Do not operate a vehicle if it has oil pressure that is low, dropping, or fluctuating.
23 . What does a vehicle inspection report do?
Drivers may be required to submit a written vehicle inspection report at the end of each day of driving. The motor carrier must repair any items in the report that affect safety and certify on the report that repairs were either made or unnecessary.
24 . When driving in winter, which of the following should receive extra attention in a pre-trip inspection?
When doing a pre-trip inspection during the winter, you should pay extra attention to the coolant level and amount of antifreeze; the defrosting and heating equipment; the wiper blades and windshield washer; the tires and tire chains; the lights and reflectors; the windows and mirrors; the hand holds, steps, and deck plates; the radiator shuttles and winterfront; and exhaust system.
25 . Texting while driving should:
Texting while driving is a dangerous distraction and is prohibited at all times when operating a CMV.
26 . Hydroplaning happens most often when:
Hydroplaning is most likely to occur when driving on wet roads with tire pressure that is too low and tire tread that is too worn. If there is enough water on the road, hydroplaning can occur at speeds as low as 30 mph.
27 . If your vehicle has air brakes, you must have ____ endorsement to operate the vehicle.
You must obtain an air brakes endorsement if you plan to operate a vehicle equipped with air brakes.
28 . One way to prevent fatigue on long trips is to:
To avoid becoming fatigued on a long trip, you should take a break after every 100 miles or two hours of driving. Driving through the night, or during any other time when you would normally be asleep, raises the danger of fatigue.
2025 Arizona | Frequently Asked Questions
To acquire a CDL Tank endorsement in Arizona, you must first have a Commercial Driver's License (CDL). Then, study the Arizona Commercial Driver License Manual’s tank vehicle section. After that, schedule and pass the Tank Vehicle endorsement written test at an Arizona Motor Vehicle Division (MVD) office. The endorsement will be added to your CDL upon passing the test.
To obtain a CDL Tank license, it's essential to first have a Commercial Driver's License (CDL). Then, you need to study the tank vehicle section of the Commercial Driver License Manual. Once you're prepared, schedule and pass the Tank Vehicle endorsement written test at your local Motor Vehicle Division (MVD) office. The endorsement is added to your CDL upon passing.
While specific training or experience is not legally mandatory for a CDL Tank endorsement in Arizona, it's highly recommended to understand the unique handling characteristics and safety concerns of tank vehicles. Studying the tank vehicle section of the Arizona Commercial Driver License Manual thoroughly is crucial. Practical experience or training can significantly improve your chances of passing the endorsement test.
Yes, to obtain a CDL Tank endorsement in Arizona, you must pass an additional written test that focuses on the knowledge required to safely operate a tank vehicle. This includes understanding the vehicle's handling characteristics, inspecting tank vehicles, and understanding the effects of surge and liquid movement on vehicle stability.
The written test for the CDL Tank endorsement in Arizona includes subjects such as tank vehicle inspection, safe driving techniques, loading and unloading procedures, and emergency response. Additionally, it covers topics like identifying hazardous materials, understanding weight distribution, and proper placarding requirements.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. It evaluates your understanding of inspecting tank vehicles, recognizing high center of gravity and its effects, handling stability and surge, safe driving rules, emergency procedures, and understanding the operation of special purpose tanks.
Yes, drivers with a CDL Tank endorsement must comply with federal and state regulation regarding load limits, vehicle inspections, and hours of service. They also must handle hazardous materials appropriately if they have a Hazardous Materials (HazMat) endorsement. Additionally, they cannot operate a tank vehicle under the influence of alcohol or drugs.
No, a valid CDL Tank endorsement is required to transport liquid or gas materials. This requirement is strictly enforced under federal and state laws. Driving without the proper endorsement can lead to fines, license suspension, and even imprisonment. It's essential to obtain the correct endorsements for the specific type of cargo you'll be transporting.
The CDL Tank endorsement can be added to an existing Commercial Driver's License. You don't need a fresh application. However, you'll have to pass a knowledge test specific to tank vehicles. Once you pass the test, the endorsement will be added to your CDL, allowing you to transport liquid or gas materials legally.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional training and certification. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. Additionally, they must follow specific safety protocols when loading, unloading, and transporting these materials to prevent accidents and spills.