Combination Vehicles Practice Test | Texas 2025 #2

Train for FREE online with our Texas CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TX combination license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 22

1 . If a trailer's spring brakes do not release when you push the tractor air supply control, you should:

Check the air line connections.

Release the pintle hook.

Replace the spring brakes.

Drive normally without checking anything.

It is important that all of your vehicle's equipment is in proper working condition before you begin a trip. If a trailer's spring brakes do not release when you push in the tractor air supply control, you should make sure the air line connections are properly attached and sealed.

2 . Air pressure in the ____ air line is controlled by either the foot brake or trailer hand brake.

Emergency

Service

Rear

Auxiliary

Air pressure in the service air line is controlled by either the foot brake or trailer hand brake. The service air line is also known as the control line or signal line. This line is connected to relay valves, which allow the trailer brakes to be applied more quickly than would otherwise be possible.

3 . Starting in which year were newly manufactured trailers required to have ABS?

1972

1987

1998

2004

All trailers and converter dollies manufactured on or after March 1, 1998 must be equipped with Anti-Lock Braking Systems (ABS).

4 . An air supply control in its "emergency" position will:

Turn on the air supply.

Apply the trailer emergency brakes.

Prevent a skid.

Accelerate the vehicle.

Tractor protection controls in older vehicles may be operated by levers instead of knobs. If an air supply control is set in its "emergency" position, the air supply will be stopped and the trailer emergency brakes will be applied.

5 . ____ are the cause of more than half of all accident-related truck driver deaths.

Truck rollovers

Motorcycles

Slippery roads

Pedestrians

More than half of all accident-related truck driver deaths are a result of truck rollovers. To help prevent a rollover, be sure to load cargo low to the ground and centered on your rig. Take corners slowly and carefully.

6 . A lightly-loaded combination vehicle will stop more slowly than a fully-loaded vehicle because:

The stiff suspension springs and strong brakes will have high traction.

The stiff suspension springs and strong brakes will have low traction.

The brakes only operate when a trailer reaches a minimum weight.

The suspension springs only operate when a trailer reaches a minimum weight.

An empty combination vehicle will come to a complete stop more slowly than a fully-loaded vehicle. The stiff suspension springs and strong brakes will have lower traction on a light trailer than they would if the vehicle carried more weight.

7 . To help prevent rollovers, you should:

Accelerate quickly after stopping.

Drive slowly around turns.

Keep the load near the back of the trailer.

Keep the load on one side of the trailer.

To lower the risk of a rollover, load your cargo as closely to the ground as possible. To further reduce this risk, take curves and corners slowly.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2025 Texas | Frequently Asked Questions

To acquire a CDL Tank endorsement in Texas, you must already have a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle (N) endorsement knowledge test at your local Department of Public Safety (DPS) office. You should study the Texas CDL Handbook to prepare for this test.

Obtaining a CDL Tank license requires you to first have a Commercial Driver's License (CDL). You must then pass the Tank Vehicle (N) endorsement knowledge test. It's essential to study the related sections in the CDL Handbook before taking the test. You may also need to undergo a background check depending on the type of materials you will be transporting.

While Texas doesn't require specific training or experience for a CDL Tank endorsement, it's highly recommended to prepare for the Tank Vehicle (N) endorsement knowledge test. You can self-study using the Texas CDL Handbook. However, many choose to attend a training program to gain practical skills and knowledge, which could increase chances of passing the test.

Yes, to obtain a CDL Tank endorsement in Texas, you must pass the Tank Vehicle (N) endorsement knowledge test. This written test focuses on the handling and transportation of liquid cargo. The specific content and number of questions can vary, so it's best to prepare using resources like the Texas CDL Handbook.

The written test for the CDL Tank endorsement in Texas includes subjects such as inspecting and driving tank vehicles, safe driving practices, cargo handling and emergency procedures, and specific knowledge related to transporting liquids and gases.

The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. You'll need to understand the inspection of tank vehicles, specifics of driving high center of gravity vehicles, safe driving practices, and how to handle emergencies. There's no specific skills test or road test for the Tank endorsement like there is for the basic CDL.

Drivers with a CDL Tank endorsement must adhere to all federal and state regulations related to transporting liquids. This includes weight limits, proper securing of cargo, and handling of hazardous materials if applicable. Furthermore, they may be subject to more frequent inspections. Violations can result in fines, CDL suspension or revocation.

No, it's illegal to transport liquid or gas materials in a tank vehicle without a valid CDL Tank endorsement. This rule applies to vehicles designed to transport 1,000 gallons or more. Violation can result in hefty fines, legal penalties, and potential suspension or revocation of your CDL. Always ensure your endorsements are up-to-date before transporting such materials.

The CDL Tank endorsement can be added to your current Commercial Driver's License (CDL). You don't need to apply for a new CDL. However, you will need to pass the Tank Vehicle endorsement knowledge test. Once you pass the test, your CDL will be updated with the Tank endorsement.

Yes, there are specific regulations and prerequisites for handling hazardous materials with a CDL Tank endorsement in Texas. These include obtaining a hazardous materials endorsement, passing a background check, completing specialized training, and adhering to strict safety protocols when transporting, loading, and unloading hazardous materials.