Air Brakes #2

Air Brakes Endorsement Test | Montana 2024 #2

Train for FREE online with our Montana CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT Class A/Class B driver license in 2024, practice as much as..

Train for FREE online with our Montana CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT Class A/Class B driver license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.

25
20
20

1 . What should happen before the air pressure in an air brake system tank falls below 55 psi?

The low air pressure warning signal must activate before the air supply pressure drops below 55 psi in the air tank. If the warning signal does not turn on when being tested during an inspection, the vehicle is not safe to drive.

2 . What does an air compressor do in an air brake system?

In an air brake system, the air compressor pumps air into the air storage tanks. The air compressor is controlled by the air compressor governor.

3 . To stop in a vehicle that uses air brakes, the driver should:

Pull the brake pedal up. To make a normal stop in a vehicle with air brakes, push the brake pedal down. The harder the pedal is pressed, the more air pressure is released.

4 . The ____ between an air compressor and reservoir tank prevents air from escaping if the air compressor has a leak.

A one-way check valve is required to be between an air compressor and the first main reservoir. This valve prevents air from escaping the system if the air compressor develops a leak.

5 . Braking mechanisms are located ____ a brake drum.

On top of Drum brakes are attached to the wheels and located on the axles of a vehicle. The braking mechanisms that cause the vehicle to stop can be found inside of a drum brake.

6 . When you are about to start down a hill, you should switch into a ____ gear.

Before starting down a hill, be sure to switch into a low gear. Gravity will increase your vehicle's speed as you travel downhill.

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Montana | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Montana, you first need to have a Montana CDL. Then, you must pass the Hazardous Materials Endorsement Knowledge Test. You'll also need to undergo a TSA background check. Once you've passed the tests and background check, you can apply for the endorsement through the Montana Department of Motor Vehicles.
Before obtaining a CDL Hazmat endorsement, you must hold a valid Commercial Driver's License (CDL). You need to be at least 21 years old, have U.S. citizenship or lawful permanent residency, and be able to read and speak English. Additionally, you must pass a Hazardous Materials Endorsement Knowledge Test and a TSA background check.
When applying for a CDL Hazmat endorsement, you'll need to provide your current CDL, proof of U.S. citizenship or lawful permanent residency (like a birth certificate or green card), and proof of identity. Additionally, you'll need to complete a Hazardous Materials Endorsement application and pass the TSA background check.
Yes, there is a dedicated written test for the CDL Hazmat endorsement. This test covers various topics related to hazardous materials, including recognition and identification, communication rules, emergency response, and more. You must pass this test to obtain your Hazmat endorsement in Montana.
The written test for the CDL Hazmat endorsement covers a range of topics related to hazardous materials. These include identification of hazardous materials, loading and unloading procedures, use of placards and labels, emergency response procedures, and regulations pertaining to transport. It also covers safety precautions and the handling of discharge system and leaks.
Yes, there are additional costs associated with obtaining a CDL Hazmat endorsement. These include fees for the written test, TSA background check, and fingerprinting. The total cost can vary, but you can expect to pay between $80-$120. It's recommended to check with the Montana Motor Vehicle Division for the most current fees.
Yes, a background check and security clearance are necessary for the CDL Hazmat endorsement. This process, known as the Threat Assessment Program, is managed by the Transportation Security Administration (TSA). It involves checking criminal history, immigration status, and mental health status to ensure that hazardous materials are transported safely.
Yes, specialized training is required for the CDL Hazmat endorsement. You must pass a written test about transporting hazardous materials. Additionally, you must undergo a TSA background check. The training and certification ensure you understand how to safely transport hazardous materials, are aware of the risks involved, and know how to respond in case of emergencies.
No, you cannot legally transport hazardous materials without a valid CDL Hazmat endorsement in Montana or anywhere in the U.S. This endorsement is required by federal law and ensures that drivers have the necessary skills and knowledge to safely handle and transport hazardous materials. Violating this law can result in severe penalties.
Yes, you can add the CDL Hazmat endorsement to your current CDL license. You do not need to apply for a new CDL. However, you must pass the Hazmat knowledge test, submit fingerprints, and undergo a TSA background check. Once these steps are completed and approved, the Hazmat endorsement will be added to your existing CDL.

Search the best driving school in your neighbourhood