Air Brakes #2

FREE Air Brakes Endorsement Test Online | Kansas 2024

Train for FREE online with our Kansas CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a KS Class A/Class B driver license in 2021, practice as much as..

Train for FREE online with our Kansas CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a KS Class A/Class B driver license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.

25
20
20

1 . The ____ tells a driver how much pressure is in the air tanks.

Drum brake A vehicle that is equipped with air brakes must also be equipped with a supply pressure gauge. This gauge tells the driver how much air pressure is in each of the vehicle's air tanks.

2 . During an applied leakage test, the maximum leakage rate for a double combination vehicle is:

4 psi in a minute. It is important to know the maximum air loss rate that is safe for your specific vehicle. A double combination vehicle should have a leakage rate no higher than 4 psi in a minute during an applied leakage test.

3 . A low air pressure warning signal should activate:

When tank pressure falls below 5 psi. In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.

4 . The air pressure in a dual air brake system should build from 85 to 100 psi within:

45 seconds. When inspecting a vehicle with a dual air brake system, you should wait for air pressure to build from 85 to 100 psi in both the primary and secondary systems. This should take about 45 seconds.

5 . Most heavy-duty vehicles use ____ air brake systems.

Quad The majority of heavy-duty vehicles are equipped with dual air brake systems.

6 . Before driving a vehicle with air brakes, you should ensure that the spring brakes come on automatically when:

Driving uphill. Before driving a vehicle with air brakes, you should ensure that the spring brakes come on automatically when air tank pressure falls to a level between 20 and 45 psi. You can do this by chocking the wheels and releasing air from the braking system by stepping on and off the brake pedal. Once the pressure drops to an unsafe level, the parking brake valve should pop out and spring brakes should come on.

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet
99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Kansas | Frequently Asked Questions

To acquire a CDL Tank endorsement in Kansas, you will need to pass the written knowledge test specific to tank vehicles. Study the Kansas CDL Manual and take practice tests to prepare. Once you feel confident, schedule an appointment at your local Kansas DMV office to take the test. If you pass, you will receive your CDL Tank endorsement.
To obtain a CDL Tank license in Kansas, you must already possess a valid Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Test which covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules. It's recommended to study the state's CDL manual before taking the test.
While Kansas does not specifically require training or experience to obtain a CDL Tank endorsement, it's highly recommended. The endorsement test covers specific knowledge about handling and driving tank vehicles. Studying the state's CDL manual, taking practice tests, and possibly enrolling in a training course can significantly increase your chances of passing the test.
Yes, to obtain a CDL Tank endorsement in Kansas, you must pass the Tank Vehicle Endorsement Test. This written test covers specific knowledge about inspecting and driving tank vehicles, understanding the vehicle's structure, and following safe driving rules. It's recommended to thoroughly study the Kansas CDL manual before taking the test.
The written test for the CDL Tank endorsement in Kansas covers various subjects. These include knowledge of inspecting tank vehicles, understanding the vehicle's structure, recognizing high center of gravity and its effects, handling surge, and adhering to safe driving rules. The test also covers procedures for emergencies and loading/unloading of tanks.
The CDL Tank endorsement written test doesn't assess specific driving maneuvers. Instead, it evaluates knowledge on relevant topics such as the inspection of tank vehicles, understanding the high center of gravity, dealing with surge, handling unstable loads, and safe driving rules. Practical skills are usually assessed during the general CDL driving test or through on-the-job performance.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They must only drive tank vehicles consistent with their license class and endorsements. They must follow all specific safety protocols related to loading, unloading, and handling of tank vehicles. Additionally, they must comply with hours of service regulations and cannot transport hazardous materials unless they also have a Hazmat endorsement.
No, it's illegal to transport liquid or gas materials without a valid CDL Tank endorsement in Kansas. This endorsement is required for operating a tank vehicle, which is defined as any commercial vehicle designed to transport any liquid or gaseous materials within a tank of 1,000 gallons or more. Violations can result in fines and license suspension.
In Kansas, the CDL Tank endorsement can be added to your existing commercial driver's license. You don't need a fresh application for a new license. However, you must pass the Tank Vehicle written test. After passing the test, you pay a fee to add the endorsement to your current CDL. Always check with your local DMV for the most current procedures and fees.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional prerequisites. Drivers must also possess a Hazardous Materials (HazMat) endorsement. This requires passing a written test on federal and state regulations for transporting hazardous materials, and undergoing a federal security threat assessment, which includes fingerprinting and a background check.

Search the best driving school in your neighbourhood