Arizona Driver's Examination

Knowledge Test Class A #1

FREE CDL Class A Driving Test Online | Arizona 2024

Train for FREE online with our Arizona class A license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AZ CDL class A permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class A requirements may vary from state to state.

Your knowledge on topics including shifting tactics, railroad crossing safety, drunk driving rules, and more will be expanded by answering 50 multiple-choice questions, allowing you to become a safer driver and pass your CDL exam. Each question is based on those in the Arizona Commercial Driver License Manual and includes a hint and an explanation to help you understand the subject and answer subsequent questions correctly. Good luck, and practise until you're comfortable with the real exam.

Ideal for:

CDL holders who want to add endorsements to their licence
First-time AZ CDL and CLP applicants
Applicants for CDL renewal in Arizona

On the actual AZ CDL exam:

There's 50 questions
To pass, you must get 40 right answers
80% passing score

Number of Question 50

Passing Score 40

Number of Tests 20

1 . During the vehicle inspection test, you must be able to do all of the following, except:

Show where the power steering fluid dipstick is located.

Check for adequate power steering fluid.

Ensure that the power steering fluid level is above the full mark.

During the pre-trip vehicle inspection test, you will be asked to indicate where the power steering fluid dipstick or reservoir sight glass is located. You will need to show that the power steering fluid is within a safe operating range.

2 . During a basic vehicle controls skills test exercise, your vehicle's final position should be:

In the general area that was described by the examiner.

In the exact final position described by the examiner.

Within three feet of the final position described by the examiner.

You should finish each exercise with your vehicle in the exact position described by the examiner. You can be penalized for failing to complete an exercise exactly in the manner described by the examiner, potentially resulting in failure of the basic control skills test.

3 . When driving under wet conditions, a lack of spray coming from the tires of other vehicles indicates that:

Ice has formed on the road.

The pavement is dry.

The spray is caught on the underside of the vehicle.

In wet conditions, a lack of spray coming from the tires of other vehicles indicates that ice has formed on the road. Be especially cautious when traveling under wet conditions in freezing weather.

4 . Bridges usually:

Do not freeze.

Have heaters to prevent them from freezing.

Freeze before other surfaces.

Bridges tend to freeze before other parts of the road surface. You should be especially careful on bridges when temperatures are near the freezing point.

5 . When it is difficult to see other vehicles, such as at dawn or dusk, you should:

Keep your lights off.

Turn your lights on.

Drive on the shoulder.

When driving at dawn, at dusk, or in inclement weather, you should use your headlights on their low beam setting to increase your visibility.

6 . Dual tires should:

Always come into contact with one another.

Come into contact with one another fairly regularly.

Not come into contact with one another.

When inspecting a vehicle, you should verify that your dual tires do not come into contact with one another, or with any other part of the vehicle.

7 . When drivers turn, they usually:

Look in the direction of the turn.

Look in the direction opposite the turn.

Look behind their vehicles.

When turning, drivers usually look in the direction of their turn. If a driver fails to signal before a turn or lane change, their body movements may still provide a clue that they are planning to turn.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Ace Your AZ DMV Written Test Get Your AZ DMV Cheat Sheet Now!

Your Progress

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

To Pass 50

4.60 out of 5 based on 137 votes

2024 Arizona | Frequently Asked Questions

To acquire a CDL Tank endorsement in Arizona, you must first have a Commercial Driver's License (CDL). Then, study the Arizona Commercial Driver License Manual’s tank vehicle section. After that, schedule and pass the Tank Vehicle endorsement written test at an Arizona Motor Vehicle Division (MVD) office. The endorsement will be added to your CDL upon passing the test.

To obtain a CDL Tank license, it's essential to first have a Commercial Driver's License (CDL). Then, you need to study the tank vehicle section of the Commercial Driver License Manual. Once you're prepared, schedule and pass the Tank Vehicle endorsement written test at your local Motor Vehicle Division (MVD) office. The endorsement is added to your CDL upon passing.

While specific training or experience is not legally mandatory for a CDL Tank endorsement in Arizona, it's highly recommended to understand the unique handling characteristics and safety concerns of tank vehicles. Studying the tank vehicle section of the Arizona Commercial Driver License Manual thoroughly is crucial. Practical experience or training can significantly improve your chances of passing the endorsement test.

Yes, to obtain a CDL Tank endorsement in Arizona, you must pass an additional written test that focuses on the knowledge required to safely operate a tank vehicle. This includes understanding the vehicle's handling characteristics, inspecting tank vehicles, and understanding the effects of surge and liquid movement on vehicle stability.

The written test for the CDL Tank endorsement in Arizona includes subjects such as tank vehicle inspection, safe driving techniques, loading and unloading procedures, and emergency response. Additionally, it covers topics like identifying hazardous materials, understanding weight distribution, and proper placarding requirements.

The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. It evaluates your understanding of inspecting tank vehicles, recognizing high center of gravity and its effects, handling stability and surge, safe driving rules, emergency procedures, and understanding the operation of special purpose tanks.

Yes, drivers with a CDL Tank endorsement must comply with federal and state regulation regarding load limits, vehicle inspections, and hours of service. They also must handle hazardous materials appropriately if they have a Hazardous Materials (HazMat) endorsement. Additionally, they cannot operate a tank vehicle under the influence of alcohol or drugs.

No, a valid CDL Tank endorsement is required to transport liquid or gas materials. This requirement is strictly enforced under federal and state laws. Driving without the proper endorsement can lead to fines, license suspension, and even imprisonment. It's essential to obtain the correct endorsements for the specific type of cargo you'll be transporting.

The CDL Tank endorsement can be added to an existing Commercial Driver's License. You don't need a fresh application. However, you'll have to pass a knowledge test specific to tank vehicles. Once you pass the test, the endorsement will be added to your CDL, allowing you to transport liquid or gas materials legally.

Yes, handling hazardous materials with a CDL Tank endorsement requires additional training and certification. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. Additionally, they must follow specific safety protocols when loading, unloading, and transporting these materials to prevent accidents and spills.