Air Brakes #2
Air Brakes Endorsement Test | Alabama 2024 #2 Page 4 of 4
Train for FREE online with our Alabama CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL Class A/Class B driver license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
19 . The ____ tells a driver how much pressure is in the air tanks.
Drum brake
A vehicle that is equipped with air brakes must also be equipped with a supply pressure gauge. This gauge tells the driver how much air pressure is in each of the vehicle's air tanks.
20 . When parking, you should not use the parking brake if:
If your brakes are hot after coming down a steep grade, you should not use your parking brake when parking. Let your brakes cool before applying the parking brake or risk damaging the brakes.
21 . If the spring brakes are on, you should:
Be especially careful because the brakes may fail.
You should not apply the brake pedal if the spring brakes are activated. The brakes could be damaged if they are subjected to the force of air pressure and the springs at the same time.
22 . To stop in a vehicle that uses air brakes, the driver should:
Pull the brake pedal up.
To make a normal stop in a vehicle with air brakes, push the brake pedal down. The harder the pedal is pressed, the more air pressure is released.
23 . A low air pressure warning signal should activate:
In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.
24 . Anti-Lock Braking Systems (ABS):
If equipped, ABS is in addition to a vehicle's normal braking system and does not increase or decrease the braking power of any other system. ABS only activates when a vehicle's wheels are about to lock.
25 . Brakes may get out of adjustment:
If they get wet.
Brakes can get out of adjustment quickly, especially if they are used to the point of overheating. Brake adjustment should be checked frequently.
Search the best driving school in your neighbourhood
2024 Alabama | Frequently Asked Questions
A CDL Class B license in Alabama allows the driver to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 or more pounds, or any such vehicle towing a vehicle not in excess of 10,000 pounds GVWR. This includes straight trucks, buses, large passenger vehicles, segmented buses, and trucks towing smaller vehicles.
In Alabama, a Class B CDL license permits the operation of single vehicles with a gross vehicle weight rating (GVWR) of 26,001 or more pounds, or towing a vehicle not exceeding 10,000 pounds GVWR. This includes large buses, segmented buses, straight trucks, and trucks towing smaller vehicles such as a small trailer or boat.
To acquire a Class B CDL license in Alabama, applicants must be at least 21 years old (or 18 for intrastate travel), possess a valid Alabama driver's license, pass a vision test, and complete a written knowledge test. They must also complete a skills test in a vehicle representative of the class of CDL they are applying for.
In Alabama, you must be at least 21 years old to qualify for a Class B CDL license for interstate commerce. However, if you only intend to drive within the state (intrastate commerce), you can qualify for a Class B CDL license at 18 years old.
Specific endorsements aren't necessary for a Class B CDL license, but they can provide additional driving privileges. For instance, endorsements for passenger vehicles, school buses, tank vehicles, or hazardous materials can be added to a Class B CDL after passing specific written and skills tests. These endorsements broaden the range of vehicles you can operate.
The Class B CDL skills assessment in Alabama includes three parts: the vehicle inspection test, the basic controls test, and the road test. The vehicle inspection test assesses your ability to determine if your vehicle is safe to drive. The basic controls test evaluates your ability to maneuver and control the vehicle. Lastly, the road test assesses your on-road driving skills.
Yes, Class B CDL license holders in Alabama are limited to operating single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a vehicle towing another vehicle not exceeding 10,000 pounds GVWR. They cannot operate a combination of vehicles (like tractor-trailers) that would require a Class A CDL. Specific endorsements may also be required for certain types of vehicles or loads.
In Alabama, the written Class B CDL test is primarily offered in English. However, some locations may offer the test in Spanish. It's important to note that federal regulations require all commercial drivers to read and speak English sufficiently to communicate with the general public, understand highway traffic signs and signals, and respond to official inquiries.
Yes, you can request test accommodations for the Class B CDL written exam in Alabama if you have a disability. You'll need to provide documentation of your disability and specify the type of accommodation needed. The Alabama Law Enforcement Agency will review your request and determine if the accommodation can be provided without compromising the integrity of the test.
Yes, if you don't pass the Class B CDL written test in Alabama, you can retake it. However, you must wait at least one day before retaking the test. If you fail the test three times, you will need to start the application process over, including paying the necessary fees. It's recommended to study thoroughly to increase your chances of passing on your next attempt.
