Knowledge Test Class B #1
Class B Driving Test | Texas 2026 #1 Page 7 of 7
Train for FREE online with our Texas class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TX CDL class B permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
22
43 . Brake fading is caused when:
Brakes are wet.
Using the brakes excessively will cause them to overheat, making them less effective. This is referred to as "fading."
44 . Improperly loaded cargo can:
Aid in safety.
Cargo must be properly loaded and secured to prevent it from falling or shifting dangerously. During a quick stop, improperly loaded cargo could injure or even kill the driver.
45 . What can happen if the air pressure gets too low in an air brake system?
The brakes will be very sensitive.
Pressing and releasing the brake pedal unnecessarily can let air out faster than the compressor can replace it, reducing the available air pressure. If the air pressure in an air brake system gets too low, the brakes will no longer work.
46 . How many air storage tanks are used in an air brake system?
The number varies.
Air storage tanks are used to hold compressed air. The number and size of air tanks in an air brake system varies among vehicles.
47 . Which of the following is not a sign of fatigue?
Drifting from your lane
Driving while fatigued is dangerous. Warning signs of fatigue include difficulty focusing; repeated yawning or rubbing of the eyes; daydreaming or wandering thoughts; and drifting out of your lane.
48 . If driving a school bus, your four-way flashers should:
Only be used near railroad tracks if a train is approaching.
When driving a school bus, you must activate your four-way flashers while approaching and crossing a railroad crossing. Deactivate the flashers once your entire vehicle has cleared the tracks.
49 . When taking the basic control skills test, drivers are:
Allowed to leave the vehicle, but only if the vehicle is placed in neutral and the parking brake is set.
During the basic vehicle control skills test, you must place the vehicle in neutral and set the parking brake before exiting the vehicle to check its position. You may check the position of the vehicle no more than twice, except during the straight line backing exercise, where you may look no more than once.
50 . When conducting a vehicle inspection, you will need to identify all of the following, except:
The water compressor belt.
During the vehicle inspection test, you must check the power steering belt, water pump belt, alternator belt, and air compressor belt for snugness, cracks, or frays. If any of these components are not belt-driven, you must tell the examiner which one(s), and verify that they are operating properly, mounted securely, and not damaged or leaking.
See the exact questions that will be on the 2026 Texas DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2026 Texas | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Texas, you need to have a valid CDL license first. Then, study the Texas CDL handbook's section on Doubles/Triples endorsement. Afterwards, schedule an appointment at your local DMV to take the written test. Upon passing, you'll receive your endorsement. Remember, some employers may require additional on-the-job training.
To obtain a CDL Doubles/Triples license in Texas, you need to have a basic CDL license first. Then, pass the Doubles and Triples Endorsement Test which covers coupling and uncoupling, inspecting doubles and triples, and checking air brakes. Additionally, you must pass a vision test and provide proof of medical fitness.
While Texas doesn't require specific experience for a CDL Doubles/Triples endorsement, it's recommended to have practice handling such large vehicles. A CDL training course can provide this. You must pass a written test on handling double/triple trailers. Knowledge of coupling/uncoupling, inspecting trailers and air brakes is necessary. Professional training can greatly improve your chances of passing the test.
Yes, to obtain a CDL Doubles/Triples endorsement in Texas, you must pass an additional written test. This test covers information specific to driving double and triple trailers such as coupling and uncoupling, inspecting doubles and triples, and the proper procedures for pulling double/triple trailers. No additional road test is required for this endorsement.
The CDL Doubles/Triples endorsement test in Texas is a written exam, not a skills test. It focuses on knowledge such as how to couple and uncouple correctly, inspecting doubles and triples, and checking air brakes. You'll need to understand safe driving techniques for these larger vehicles, but you won't perform actual driving maneuvers during the test.
No, it's not permissible to operate double/triple trailers without a valid CDL Doubles/Triples endorsement in Texas. The endorsement is a legal requirement, demonstrating that the driver has the necessary knowledge and skills to handle such large vehicles safely. Driving without the appropriate endorsement could result in penalties, fines, or even loss of your CDL.
You can add the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples knowledge test. Once you pass, the Texas Department of Public Safety will add the endorsement to your existing CDL.
Yes, there are constraints for drivers with a CDL Doubles/Triples endorsement. For instance, these drivers must comply with specific weight and length regulations for their vehicles. They may also face restrictions related to hazardous materials transport. Additionally, they must adhere to hours-of-service rules set by the Federal Motor Carrier Safety Administration to ensure safe driving practices.
In Texas, the maximum legal weight for a semi-truck is 80,000 pounds without an overweight permit. The maximum length for a single trailer is 59 feet, while double trailers can be up to 28.5 feet each, and triple trailers up to 28 feet each. However, triple trailers are not legal on all roads in Texas.
Yes, there are specific safety guidelines for driving double/triple trailers. Drivers must ensure proper coupling and uncoupling of units, maintain safe following distance, and manage high-speed and curve control. They must also be aware of the "crack-the-whip" effect that can occur when changing lanes or turning. Furthermore, drivers must abide by Federal Motor Carrier Safety Administration regulations for hours-of-service.
