Knowledge Test Class B #1
Class B Driving Test | Texas 2026 #1 Page 4 of 7
Train for FREE online with our Texas class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TX CDL class B permit in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
22
22 . If the low pressure warning signal activates while you are driving, you should:
Put on your hazard lights and continue driving.
If the low pressure warning signal activates while you are driving, it is important that you safely exit the roadway as soon as possible and park your vehicle. If the air pressure gets too low, the brakes will no longer work well enough for you to stop safely.
23 . If confronted by an aggressive driver, you should:
All of the above.
If confronted by an aggressive driver, the most important thing to do is try to get out of their way. Avoid making eye contact with the driver and do not let yourself be provoked by gestures. Do not try to challenge aggressive drivers by speeding up.
24 . If you plan to slow down, you can warn drivers behind you by:
Putting your hand out the driver's side window and waving.
Before slowing down, it is a good idea to flash your brake lights by lightly tapping your brake pedal a few times. This will warn drivers behind you of your plans to slow down.
25 . During a vehicle inspection, be sure that:
The emergency exits are not accessible from inside the cab.
During the vehicle inspection test, you must ensure that any emergency exit warning devices are working. All emergency exits should operate smoothly, be undamaged, and close securely from the inside.
26 . When you press the brake pedal in a vehicle with S-cam brakes, air pressure pushes out the rod and moves the:
Alcohol evaporator.
When pressing the brake pedal in a vehicle with S-cam brakes, air will enter the brake chambers. The added air pressure will push out the rods and move slack adjusters, twisting the brake camshafts.
27 . When using the controlled braking method in an emergency situation, you should:
Apply the brakes with minimal pressure.
The controlled braking method for emergency stops involves applying the brakes as hard as you can without locking the wheels. Keep steering wheel movements small when braking in this way.
28 . When checking tire condition during the vehicle inspection, you should:
Ensure that the tires have even wear.
When examining your tires during the vehicle inspection test, you should ensure that treads are evenly worn.
2026 Texas | Frequently Asked Questions
A CDL Class B license in Texas allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or any such vehicle towing another not exceeding 10,000 pounds. This includes buses, farm labor vehicles, and any combination of vehicles that are not Class A vehicles.
A Class B CDL license in Texas allows the holder to operate vehicles such as straight trucks, large buses, segmented buses, box trucks, dump trucks with small trailers, and tractor-trailers. However, it is important to note that any trailer being towed must not exceed a gross vehicle weight rating of 10,000 pounds.
To acquire a Class B CDL license in Texas, applicants must be at least 18 years old (21 for interstate driving), possess a valid Texas driver's license, pass a vision exam, and successfully complete a knowledge test. They must also pass a skills test, which includes a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving examination.
In Texas, you must be at least 18 years old to qualify for a Class B Commercial Driver's License (CDL) for intrastate driving (within Texas only). However, if you intend to drive across state lines (interstate driving), federal regulations require you to be at least 21 years old.
While not always necessary, specific endorsements can be added to a Class B CDL license in Texas to allow for the operation of special types of vehicles. These include passenger (P), school bus (S), and tanker (N) endorsements. Each endorsement requires additional knowledge tests, and some also require a skills test.
The Class B CDL skills assessment in Texas includes three parts: a pre-trip vehicle inspection to check your understanding of your vehicle and its operation, a basic controls test to assess your ability to control the vehicle, and a road test to evaluate your on-road driving skills in various traffic situations and environments.
Yes, there are limitations for Class B CDL license holders in Texas. They are permitted to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or tow a vehicle not exceeding 10,000 pounds GVWR. However, they cannot operate Class A vehicles unless they upgrade their license.
In Texas, the written Class B CDL test is primarily offered in English. However, Spanish versions are available. Please note that all CDL applicants must pass an English proficiency test, as federal regulations require all CDL holders to read and speak English sufficiently to communicate with the general public, understand highway traffic signs and signals, and respond to official inquiries.
Yes, the Texas Department of Public Safety (DPS) provides reasonable accommodations for individuals with disabilities during the Class B CDL written exam. You need to request these accommodations in advance. Contact your local DPS office for more information about the process and to discuss your specific needs.
Yes, if you don't pass the Class B CDL written test in Texas, you can retake it. However, you will need to wait at least one day before retesting. Keep in mind that additional fees may apply each time you retake the test. It's recommended to study thoroughly and use available practice tests to increase your chances of passing on the next attempt.