Knowledge Test Class B #2
Class B Driving Test | Maine 2024 #2 Page 3 of 7
Train for FREE online with our Maine class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ME CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
15 . Broken suspension parts:
The suspension system holds up a vehicle and its load while keeping the axles in place. Defects in this system are extremely dangerous.
16 . If unable to tell if the road is becoming icy and slippery, a driver:
If you think the road surface may be becoming icy but you are not certain, you can open your window and feel the front of the side mirror, mirror support, or antenna. If ice has formed on any of these items, the road is likely becoming icy as well.
17 . How can you check for a leak in hydraulic brakes?
Check hydraulic brakes by pumping the brake pedal three times before applying firm pressure to the pedal for five seconds. The pedal should not move. If it does, there may be a leak or some other problem in the braking system.
18 . If your brakes fail when traveling downhill, decide what to do as quickly as possible because:
However you choose to deal with a brake failure on a downhill slope, it is important that you make your decision as quickly as possible. The longer you wait to act, the faster your vehicle will be moving, and the harder it will become to stop.
19 . What do air brakes use to make the brakes work?
Many large CMVs are equipped with air brakes. An air braking system uses compressed air to operate.
20 . If exiting a bus, a driver must:
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.
21 . When transporting a load, the cargo should be inspected:
Cargo and its securing devices must be inspected before starting a trip. After beginning a trip, the driver should check the load and securing devices within the first 50 miles on the road, every three hours or 150 miles traveled, and after every break.
Search the best driving school in your neighbourhood
2024 Maine | Frequently Asked Questions
To acquire a CDL Tank endorsement in Maine, you must already have a Commercial Driver's License (CDL). Next, study the Tank Vehicles section of the Maine CDL Handbook. Then, schedule and pass the Tank Vehicles Knowledge Test at your local Bureau of Motor Vehicles (BMV) branch. Upon passing, you'll receive your endorsement. Training courses are also available to help prepare for the test.
Obtaining a CDL Tank license requires having a Commercial Driver's License (CDL) first. You must study the Tank Vehicles section of your state's CDL handbook, then pass the Tank Vehicles Knowledge Test at your local Bureau of Motor Vehicles. Successful completion of this test will grant you the CDL Tank endorsement. Taking a training course is also beneficial.
While specific training or experience is not mandatory to get a CDL Tank endorsement in Maine, it's highly recommended. Studying the Tank Vehicles section of the Maine CDL Handbook is necessary. Passing the Tank Vehicles Knowledge Test at the local Bureau of Motor Vehicles is also required. Training courses, though not compulsory, can help prepare for this test.
Yes, to obtain a CDL Tank endorsement in Maine, you must pass the Tank Vehicles Knowledge Test. This is an additional written exam that covers specific knowledge related to operating tank vehicles. The information for this test can be found in the Tank Vehicles section of the Maine CDL Handbook.
The written test for a CDL Tank endorsement covers several subjects, including the inspection of tank vehicles, safe driving practices for tank vehicles, and safe loading and unloading procedures. It also includes questions about the handling of emergencies and the properties of different types of liquids and gases you might transport.
The CDL Tank endorsement assessment does not involve a skills or maneuvers test. Rather, it is a written test that examines your knowledge of operating tank vehicles. This includes understanding the vehicle's handling characteristics, the importance of inspecting tank vehicles, and the procedures to follow when loading and unloading cargo.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They are only allowed to operate tank vehicles, which are specifically designed to transport liquid or gaseous materials within a tank. Additionally, if the tank is not permanently attached to the vehicle, it must have a rated capacity of 1,000 gallons or more.
No, you cannot legally transport liquid or gas materials without a valid CDL Tank endorsement in the United States. This endorsement is required for drivers who wish to operate a tank vehicle, defined as a commercial vehicle designed to transport any liquid or gaseous materials within a tank either permanently or temporarily attached to the vehicle.
You can add a CDL Tank endorsement to your current commercial driver's license. You don't need to apply for a new license. However, you must pass the Tank Vehicle written test. After passing, the endorsement will be added to your existing CDL, enabling you to operate tank vehicles legally.
Yes, handling hazardous materials with a CDL Tank endorsement requires an additional Hazmat endorsement. To obtain this, you must pass a written test about the regulations and safety precautions for handling hazardous materials. Additionally, a TSA background check is required to ensure you're not a security risk.
