FREE Air Brakes Endorsement Test Online | Utah 2024
Train for FREE online with our Utah CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT Class A/Class B driver license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
1 . The brake pedal is part of which braking system?
The auxiliary brake system
The service brake system applies and releases the brakes when a driver presses the brake pedal while driving normally.
2 . If using spring brakes when hauling a heavy load, a complete stop will:
Spring brakes do not work on all axles. If your vehicle's spring brakes activate due to low pressure in an air brake system, your vehicle will need a longer distance to stop than usual, especially if you are carrying a heavy load.
3 . Why do you need to drain air tanks regularly?
To remove bad air from the tanks
Compressed air in an air brake system usually contains a certain amount of water and compressor oil. The water and oil can damage the brakes if left to accumulate in the system. Tanks must be drained regularly to remove this build-up.
4 . Air tank drains:
Must remain open while driving.
Compressed air in an air brake system usually contains a certain amount of water and compressor oil. The water and oil can damage the brakes if left to accumulate in the system. Manually operated air tank drains must be opened daily to remove this build-up.
5 . How is water and compressor oil removed from the bottom of an air storage tank?
A sponge is used to soak up the water and oil.
Water and compressor oil are removed from air storage tanks through a drain valve. The water and oil can damage the brakes if left to accumulate in the system. Manually operated tanks must be drained every day to remove this build-up.
6 . On a truck with air brakes, the braking system’s air compressor:
Cleans the brakes.
In an air brake system, the air compressor pumps air into the air storage tanks. The air compressor is controlled by the air compressor governor.
Search the best driving school in your neighbourhood
2024 Utah | Frequently Asked Questions
A CDL Class B license in Utah permits drivers to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a towed vehicle not exceeding 10,000 pounds GVWR. This includes straight trucks, large buses, segmented buses, box trucks, and dump trucks with small trailers. The license requires passing a general knowledge test and a skills test.
A Class B CDL license in Utah allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a towed vehicle not exceeding 10,000 pounds GVWR. These vehicles include straight trucks, large buses, segmented buses, dump trucks with small trailers, and box trucks.
To acquire a Class B CDL license in Utah, applicants must be at least 18 years old (21 for interstate driving), possess a valid Utah driver's license, pass a vision test, and a written knowledge test. They must also complete a CDL application, provide medical certification, and successfully pass the Class B vehicle skills test.
In Utah, to qualify for a Class B Commercial Driver's License (CDL), you must be at least 18 years old. However, if you intend to drive across state lines or transport hazardous materials, federal regulations require you to be at least 21 years old.
While a Class B CDL license in Utah allows you to operate certain types of heavy vehicles, specific endorsements may be necessary based on the vehicle's features or cargo. For instance, a passenger endorsement is needed for vehicles carrying 16 or more passengers and a hazardous materials endorsement for transporting hazardous substances. Endorsements require additional written and skills tests.
The Class B CDL skills assessment in Utah consists of three sections: pre-trip vehicle inspection, basic vehicle control, and on-road driving. You'll be tested on your ability to inspect your vehicle before departure, control the vehicle under various conditions, and drive safely in regular traffic situations.
Yes, Class B CDL license holders in Utah are limited to operating vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 or more pounds. They can also tow vehicles that weigh less than 10,000 pounds. They aren't allowed to drive a Class A vehicle without the proper endorsements.
In Utah, the written Class B CDL test is primarily administered in English, in accordance with federal regulations. However, assistance may be available for individuals with limited English proficiency. It's advisable to contact the Utah Driver License Division directly to discuss possible accommodations or assistance.
Yes, you can request accommodations for the Class B CDL written exam in Utah if you have a disability. It's recommended to contact the Utah Driver License Division ahead of your testing date to discuss your needs and arrange appropriate accommodations. These may include extra time, a separate room, or a reader, depending on your specific needs.
If you don't pass the Class B CDL written test in Utah, you can retake it. However, you must wait until the next day to retake the test. There is no limit on the number of times you can retake the test, but a retest fee applies each time after the third attempt.
