Tank Endorsement Test | Idaho 2025 #2

Train for FREE with our Idaho tank endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID tank license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL tank vehicle endorsement may vary from state to state.

Number of Question 20

Passing Score 16

Number of Tests 20

1 . When a vehicle is started, the coolant temperature should:

Decrease.

Rise slowly.

Jump quickly.

After an engine is started, the coolant temperature should rise gradually to a normal operating range.

2 . When loading compressed gas, the liquid discharge valves should be:

Closed.

Greased.

Opened.

Keep liquid discharge valves on a compressed gas tank closed except when loading and unloading.

3 . If an unusual noise or feeling occurs in a vehicle while it is being driven, the driver should:

Assume it is not a concern and continue driving.

Hope the vehicle does alright until it is switched to another driver.

Check the situation to determine the proper solution.

If you see, hear, smell, or feel anything while driving that does not feel right, you should have it checked out.

4 . When leaving your vehicle:

The air brakes should be applied.

The parking brake should be applied.

Brakes should not be applied if the vehicle is left out of gear.

Parking brakes should be used whenever you park. If necessary, chock your wheels.

5 . How much water must be present for a vehicle to hydroplane?

Usually several inches

A good amount, such as a large puddle

A small amount

Hydroplaning is an effect in which a vehicle's tires lose traction with the surface of the road and instead glide along a layer of water. There does not have to be much water on the road for this to occur.

6 . Which of the following is acceptable if found during a pre-trip inspection?

Tires of mismatched sizes

Tread of 3/32 of an inch in the grooves of the front tires

Tires manufactured by different makers

When checking the tires as part of a pre-trip inspection, make sure the tires have sufficient tread. There should be at least 4/32 of an inch of tread in every major groove of the front tires, and at least 2/32 of an inch of tread depth on the other tires. Tire sizes should not be mismatched.

7 . When you are behind the steering wheel, shipping papers should be:

Within reach.

In the sleeping compartment.

Hidden under the seat.

When transporting hazardous materials, shipping papers should be kept in a pouch in the driver's side door, or in another location where the driver is able to easily reach them while their seat belt is fastened. The papers must be easily visible to anyone who is entering the cab.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2025 Idaho | Frequently Asked Questions

To secure a CDL Doubles/Triples endorsement in Idaho, you need to have a valid commercial driver's license (CDL). You will then need to pass the Doubles/Triples Knowledge Test offered by the Idaho Transportation Department. It's also recommended to practice with a qualified trainer before the test to ensure you understand how to safely operate these types of vehicles.

To obtain a CDL Doubles/Triples license, you must already hold a Commercial Driver's License (CDL). You'll need to pass the Doubles/Triples Knowledge Test, which covers coupling and uncoupling, inspecting doubles and triples, and checking air brakes. It's also recommended to have some hands-on training with a qualified instructor to ensure you can safely operate these vehicles.

While Idaho does not specifically require specialized experience or training for a CDL Doubles/Triples endorsement, it is highly recommended. Understanding how to handle these types of vehicles, how to couple and uncouple, and inspecting the vehicle are crucial. This knowledge can be gained through hands-on training with a qualified instructor and studying the CDL manual.

Yes, to obtain a CDL Doubles/Triples endorsement in Idaho, you are required to pass the Doubles/Triples Knowledge Test. This written exam focuses on the specific knowledge and skills needed to safely operate double and triple trailers, including coupling and uncoupling, vehicle inspections, and managing cargo.

During the CDL Doubles/Triples endorsement test in Idaho, you won't have to showcase specific driving skills or maneuvers. The test is knowledge-based and covers topics like coupling and uncoupling, inspecting doubles and triples, and managing cargo. However, practical skills like safely driving, turning, and parking these vehicles are crucial for real-world application.

No, it is not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement in Idaho. This endorsement is required by federal and state law to ensure that drivers have the necessary skills and knowledge to safely operate these larger, more complex vehicles. Operating without the endorsement can result in fines and penalties.

You can append the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you must pass the Doubles/Triples Knowledge Test. Once passed, the endorsement will be added to your existing CDL.

Drivers with a CDL Doubles/Triples endorsement must adhere to specific rules. These include restrictions on the maximum combined length of the trailers and the requirement to only drive these vehicles on designated highways. Also, they must follow all general CDL regulations, including hours of service rules, vehicle inspection requirements, and maintaining a clean driving record.

In Idaho, the maximum weight for a commercial vehicle, including double or triple trailers, is 105,500 lbs. The maximum length for a double trailer is 61 feet for the two trailers combined. Triple trailers are not generally permitted except on designated highways and they cannot exceed 95 feet in total length. These restrictions can change, so always check the current regulations.

Yes, there are specific safety guidelines for driving double/triple trailers. Drivers must maintain a safe following distance, anticipate stops, and avoid sudden lane changes. They should also be mindful of the "crack-the-whip" effect during turns. Regular vehicle inspections are mandatory to ensure brake system integrity and correct weight distribution. Additionally, drivers must comply with all CDL rules and federal regulations.