Combination #1

FREE CDL Combination Vehicles Practice Test Online | Alabama 2024

Train for FREE online with our Alabama CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL combination license in 2021, practice as much as..

Train for FREE online with our Alabama CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL combination license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.

20
16
20

1 . When coupling, after you've connected the air lines to the trailer, you should:

Correctly following the steps to couple and uncouple trailers is vital to safely operating a combination vehicle. After connecting the air lines to the trailer while coupling, you should supply air to the trailer.

2 . To prevent a rollover, a driver should:

Turn quickly. Rollovers can happen when a combination vehicle is turned too quickly. To help prevent the risk of rollover, it is important to keep the vehicle's center of gravity low by loading cargo as close to the ground as possible.

3 . During a trip, the ____ should be open.

When starting a trip, be sure that all shut-off valves are in the open position, except for the last valves on the rear trailer. It is important that air reaches the brakes on all trailers and that it is not able to escape from the back of the vehicle.

4 . When braking with ABS, you should:

When operating a vehicle with an Anti-Lock Braking System (ABS), you should apply your brakes in the same manner as you would if operating a vehicle without ABS.

5 . When uncoupling a trailer, landing gear should be:

Firmly on the ground. Landing gear, or trailer supports, should always be completely raised before a vehicle is driven. When uncoupling, landing gear should be lowered to make firm contact with the ground. If a trailer is loaded when it is being uncoupled, you should lower the landing gear and turn the crank a few additional times to remove some weight from the trailer.

6 . Look into the back of the fifth wheel:

While inspecting a coupling, you should go under the trailer and look into the back of the fifth wheel. Ensure that the fifth wheel jaws are secured around the shank of the kingpin.

7 . If your trailer goes off course while you are backing, you should:

Turn the steering wheel all the way to the left until the trailer straightens out. If your trailer goes off course while you are backing, you should pull your truck forward and reposition your vehicle as needed before continuing to back up.

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet
99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Search the best driving school in your neighbourhood