Air Brakes #2
Air Brakes Endorsement Test | Idaho 2026 #2 Page 3 of 4
Train for FREE online with our Idaho CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID Class A/Class B driver license in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
13 . In a dual air brake system, if one air system is very low on pressure:
In a dual air brake system, either the front or rear brakes will not be fully operable if one of the air systems gets too low on pressure. If the air pressure in either tank gets too low while you are driving, you should exit the road and park as soon as possible.
14 . Brakes out of adjustment will:
Brakes out of adjustment will fade before those that are properly adjusted. Brake adjustment must be checked frequently to help prevent brake issues.
15 . An alcohol evaporator is especially important:
Some air brake systems contain an alcohol evaporator. This evaporator introduces alcohol into the system to help prevent ice from forming in cold weather.
16 . Manual air tank drains should be:
Compressed air in an air brake system usually contains a certain amount of water and compressor oil. The water and oil can damage the brakes if left to accumulate in the system. Manually operated air tank drains must be opened daily to remove this build-up.
17 . Air tank drains should:
In an air brake system, air tank drains are used to remove water and compressor oil from the air tanks. When operating a drain, be sure to drain the tank completely.
18 . The leakage rate for a triple combination vehicle with air brakes should be no more than ____ in one minute during a static leakage test.
When performing a static leakage test on a triple combination vehicle with air brakes, the leakage rate should be no more than 5 psi in one minute. If the air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.
2026 Idaho | Frequently Asked Questions
To acquire a CDL Tank endorsement in Idaho, you must have a valid Idaho CDL. You'll need to pass the Tank Vehicle written test administered by the Idaho Transportation Department. Study the CDL manual's section on tank vehicles. After passing the test, pay the required endorsement fee to add it to your CDL.
To obtain a CDL Tank license, it's essential to have a valid Commercial Driver's License (CDL). You must pass the Tank Vehicle written test, which covers the specific knowledge needed to operate tank vehicles safely. Studying the tank vehicle section in the CDL manual is crucial for passing this test. Lastly, pay the endorsement fee.
While specific training or experience isn't legally mandatory for a CDL Tank endorsement in Idaho, it's highly recommended. Understanding how to handle large, liquid-filled tanks is crucial for safety. Studying the tank vehicle section of the CDL manual and practical experience driving tank vehicles can significantly increase your chances of passing the Tank Vehicle written test.
Yes, obtaining a CDL Tank endorsement in Idaho requires passing an additional written test. This test focuses on the knowledge necessary to safely operate tank vehicles. It covers topics like high center of gravity, surge, bulkheads, baffles, and safe driving rules. The information for this test is found in the tank vehicles section of the Idaho CDL manual.
The written test for a CDL Tank endorsement covers a range of topics related to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and understanding the unique handling characteristics of tankers. It also covers safety rules, such as managing the vehicle's center of gravity and dealing with surge.
The CDL Tank endorsement written test in Idaho doesn't assess specific driving skills or maneuvers. It is a knowledge-based test focusing on understanding specific rules and safety measures for tank vehicles. Topics include the vehicle's high center of gravity, handling surge, understanding bulkheads and baffles, and adhering to safe driving rules. Practical skills are assessed separately in the general CDL driving test.
Yes, drivers with a CDL Tank endorsement face certain limitations. They can only operate commercial vehicles designed to transport liquids or gaseous materials within a tank that is permanently or temporarily attached to the vehicle. They are also required to comply with specific safety standards and procedures, such as handling hazardous materials and managing high center of gravity and surge.
No, you cannot legally transport liquid or gas materials in a commercial vehicle without a valid CDL Tank endorsement in Idaho. This endorsement is specifically designed to ensure that drivers have the necessary knowledge and skills to safely handle such materials. Driving without the appropriate endorsement can result in significant fines and penalties.
In Idaho, you can add the CDL Tank endorsement to your current license. You will need to pass the Tanker Knowledge Test and pay an additional fee. No fresh application is necessary. Remember to meet all the requirements and provide the necessary documents when applying for the endorsement.
Yes, handling hazardous materials with a CDL Tank endorsement requires adherence to specific regulations. Drivers must pass the Hazardous Materials (HazMat) endorsement knowledge test, and undergo a TSA background check. They must also follow safety procedures for loading, unloading, and transporting hazardous materials, and be aware of emergency response procedures.