FREE Air Brakes Endorsement Test Online | Idaho 2024 Page 3 of 4
Train for FREE online with our Idaho CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a ID Class A/Class B driver license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
13 . While operating on a downgrade, you should brake until you reach a speed that is:
While driving downhill, you should hold down the brake pedal until your vehicle reaches a speed 5 mph below your safe speed, then release the brake pedal. Repeat this process.
14 . When leaving your vehicle unattended:
Always apply the parking brake when leaving your vehicle unattended.
15 . If the safety relief valve in the air brake system releases air:
An air brake system has a safety relief valve, which releases air from the tanks if the pressure gets too high. If the valve must operate, something in the system is wrong and should be addressed by a mechanic.
16 . Some water and compressor oil is usually found in the compressed air within an air brake system. The water and compressor oil:
If water and compressor oil are left to build up in an air brake system, the system can be damaged. Air storage tanks are equipped with drains to allow this accumulation to be removed. Manually controlled drains should be operated at the end of each day of driving.
17 . Vehicles equipped with Anti-Lock Braking Systems (ABS) have ____ malfunction lamps to indicate when the ABS is not working.
Vehicles with ABS have yellow malfunction lamps to alert drivers when the braking systems are not working. Be sure you know where the malfunction lamp on your vehicle is before beginning a trip.
18 . The leakage rate for a triple combination vehicle with air brakes should be no more than ____ in one minute during a static leakage test.
When performing a static leakage test on a triple combination vehicle with air brakes, the leakage rate should be no more than 5 psi in one minute. If the air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.
Search the best driving school in your neighbourhood
2024 Idaho | Frequently Asked Questions
To acquire a CDL Tank endorsement in Idaho, you must have a valid Idaho CDL. You'll need to pass the Tank Vehicle written test administered by the Idaho Transportation Department. Study the CDL manual's section on tank vehicles. After passing the test, pay the required endorsement fee to add it to your CDL.
To obtain a CDL Tank license, it's essential to have a valid Commercial Driver's License (CDL). You must pass the Tank Vehicle written test, which covers the specific knowledge needed to operate tank vehicles safely. Studying the tank vehicle section in the CDL manual is crucial for passing this test. Lastly, pay the endorsement fee.
While specific training or experience isn't legally mandatory for a CDL Tank endorsement in Idaho, it's highly recommended. Understanding how to handle large, liquid-filled tanks is crucial for safety. Studying the tank vehicle section of the CDL manual and practical experience driving tank vehicles can significantly increase your chances of passing the Tank Vehicle written test.
Yes, obtaining a CDL Tank endorsement in Idaho requires passing an additional written test. This test focuses on the knowledge necessary to safely operate tank vehicles. It covers topics like high center of gravity, surge, bulkheads, baffles, and safe driving rules. The information for this test is found in the tank vehicles section of the Idaho CDL manual.
The written test for a CDL Tank endorsement covers a range of topics related to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and understanding the unique handling characteristics of tankers. It also covers safety rules, such as managing the vehicle's center of gravity and dealing with surge.
The CDL Tank endorsement written test in Idaho doesn't assess specific driving skills or maneuvers. It is a knowledge-based test focusing on understanding specific rules and safety measures for tank vehicles. Topics include the vehicle's high center of gravity, handling surge, understanding bulkheads and baffles, and adhering to safe driving rules. Practical skills are assessed separately in the general CDL driving test.
Yes, drivers with a CDL Tank endorsement face certain limitations. They can only operate commercial vehicles designed to transport liquids or gaseous materials within a tank that is permanently or temporarily attached to the vehicle. They are also required to comply with specific safety standards and procedures, such as handling hazardous materials and managing high center of gravity and surge.
No, you cannot legally transport liquid or gas materials in a commercial vehicle without a valid CDL Tank endorsement in Idaho. This endorsement is specifically designed to ensure that drivers have the necessary knowledge and skills to safely handle such materials. Driving without the appropriate endorsement can result in significant fines and penalties.
In Idaho, you can add the CDL Tank endorsement to your current license. You will need to pass the Tanker Knowledge Test and pay an additional fee. No fresh application is necessary. Remember to meet all the requirements and provide the necessary documents when applying for the endorsement.
Yes, handling hazardous materials with a CDL Tank endorsement requires adherence to specific regulations. Drivers must pass the Hazardous Materials (HazMat) endorsement knowledge test, and undergo a TSA background check. They must also follow safety procedures for loading, unloading, and transporting hazardous materials, and be aware of emergency response procedures.
