Air Brakes #2
Air Brakes Endorsement Test | Connecticut 2025 #2 Page 2 of 4
Train for FREE online with our Connecticut CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a CT Class A/Class B driver license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
7 . What helps prevent wheel lockup when braking?
The purpose of an Anti-Lock Braking System (ABS) is to prevent wheel lockup while brakes are being applied.
8 . Emergency brakes are:
Only required when transporting hazardous materials.
All trucks, truck tractors, and buses must be equipped with emergency brakes and parking brakes.
9 . If the low pressure warning light comes on while you are driving:
You should stay at least 100 feet away from other vehicles.
When driving a vehicle with air brakes, if the low air pressure warning light comes on, it is important for you to stop and safely park your vehicle as soon as possible. There may be a leak in the system. Controlled braking will remain possible only as long as there is enough air left in the tanks.
10 . A low air pressure warning signal should activate:
When tank pressure falls below 5 psi.
In an air brake system, a low air pressure warning signal must come on if air pressure in the tanks falls below 60 psi. This warning signal may come in the form of a light, a buzzer, or a wig wag.
11 . The leakage rate for a triple combination vehicle with air brakes should be no more than ____ in one minute during a static leakage test.
When performing a static leakage test on a triple combination vehicle with air brakes, the leakage rate should be no more than 5 psi in one minute. If the air leaks from the air brake system at a quicker rate, the vehicle should not be driven because something likely needs to be repaired.
12 . Where is the safety relief valve usually located?
On the dashboard
An air brake system's safety relief valve is located in the tank that is first to receive air from the compressor.
2025 Connecticut | Frequently Asked Questions
In Connecticut, to acquire a CDL Tank endorsement, you must first have a Commercial Driver's License (CDL). You then need to pass the Tank Vehicle endorsement test, which covers the special driving rules for tank vehicles. The test usually consists of 20 multiple choice questions. You can prepare for the test by studying the Connecticut CDL handbook.
To obtain a CDL Tank license in Connecticut, you must first have a Commercial Driver's License (CDL). You should then pass the Tank Vehicle endorsement test, which covers specific rules for tank vehicles. It's also essential to have a good driving record and meet the physical requirements outlined by the Federal Motor Carrier Safety Administration.
While Connecticut doesn't mandate specific training for a CDL Tank endorsement, it's highly recommended to prepare for the endorsement test. Experience is not explicitly required, but a good understanding of tank vehicles and their operation is necessary. Training programs can provide practical knowledge and help improve your chances of passing the test.
Yes, in Connecticut, to get a CDL Tank endorsement, you must pass the Tank Vehicle endorsement test. This written test focuses on specific regulations and safety measures for operating tank vehicles. The test typically includes around 20 multiple choice questions. Studying the Connecticut CDL handbook can help you prepare for this exam.
The written test for the CDL Tank endorsement in Connecticut covers a variety of topics specific to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and safe driving rules. It also covers the dangers of liquid surge in partially filled tanks and how to handle high center of gravity loads.
The CDL Tank endorsement assessment in Connecticut focuses on the knowledge required for operating tank vehicles safely. The test does not assess specific driving maneuvers but evaluates understanding of inspecting tank vehicles, handling high center of gravity loads, managing liquid surge in partially filled tanks, and following related safety regulations.
Yes, there are limitations and constraints for drivers with a CDL Tank endorsement. They are required to follow specific regulations related to the transportation of hazardous materials in tanks. These regulations include proper loading, unloading, and handling procedures, as well as adherence to weight restrictions and route restrictions designated for hazardous materials transportation. Additionally, drivers must have additional training and certification for handling tanks carrying hazardous materials.
No, a valid CDL Tank endorsement is required to transport liquid or gas materials in Connecticut. This endorsement ensures that drivers have the necessary knowledge and skills to safely handle and transport these potentially hazardous materials. Driving without the appropriate endorsement can lead to penalties, including fines and suspension of your CDL.
The CDL Tank endorsement can be added to your existing Commercial Driver's License (CDL) in Connecticut. It does not require a fresh license application. However, you will need to pass the Tank Vehicle endorsement knowledge test and pay the necessary fees to add it to your current CDL.
Yes, to handle hazardous materials with a CDL Tank endorsement in Connecticut, you must also obtain a Hazardous Materials (HazMat) endorsement. This requires passing a separate knowledge test, undergoing a background check, and being fingerprinted. Additionally, you must comply with federal regulations regarding the transportation of hazardous materials.