Class B Driving Test | Utah 2024 #2

Train for FREE online with our Utah class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.

Number of Question 50

Passing Score 40

Number of Tests 20

1 . A CMV should:

Not have a fire extinguisher, unless it is being used to transport hazardous materials.

Not have a fire extinguisher, unless it will be traveling through remote areas.

Have a fire extinguisher and other emergency equipment.

All commercial motor vehicles are required to be equipped with the proper emergency equipment. This may include spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and at least one properly charged and rated fire extinguisher.

2 . When asked to complete a conventional parallel parking maneuver, you should:

Pass the parking space while backing, then pull forward into it.

Pull forward past the parking space, then back into it.

Pull forward into the parking space without passing it first.

Back into the parking space without passing it first.

You may be asked to complete a conventional parallel parking maneuver into a parking space that is to the right of your vehicle. You should drive past the parking space before backing into it while bringing the rear of your vehicle as close to the rear of the space as possible. Your vehicle should be completely within the boundaries of the space.

3 . The person resonsible for a vehicle's safe operation is the shipper.

True

False

The driver is responsible for safely operating their vehicle and delivering their cargo without delay.

4 . Which of the following statements is correct?

Rims with a missing lug nut are acceptable if there are at least four other lug nuts on the rim.

A cracked lock ring is acceptable if the vehicle is being driven at speeds under 55 mph.

A missing clamp is dangerous and should be corrected.

Welded repairs are acceptable for wheels on rear axles.

Missing clamps, spacers, studs, or lugs can be a dangerous defect. Mismatched, bent, or cracked lock rings are not safe to be used. Wheels or rims with welded repairs are not safe.

5 . If there is ice on the front of your side mirror:

You should exit the roadway.

You can expect ice to be on the roadway.

There will not be ice on the roadway.

If your mirrors or wiper blades become icy while you are driving, you can expect the road surface to be icy as well.

6 . The minimum tread depth of all major grooves on tires that are not on the front of a CMV should be a minimum of:

1/32 of an inch.

2/32 of an inch.

4/32 of an inch.

3/4 of an inch.

When inspecting your tires, verify that there is at least 4/32 of an inch of tread depth in every major groove on the front tires, and tread depth of at least 2/32 of an inch on the other tires. Tires on the same vehicle should all be the same size.

7 . Three red reflective triangles should be carried within the vehicle

True

False

When inspecting a vehicle, you should ensure that it holds proper warning devices that can be used when the vehicle is parked. These warning devices may include three reflective triangles, six fuses, or three liquid burning flares.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Ace Your UT DMV Written Test Get Your UT DMV Cheat Sheet Now!

Your Progress

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

To Pass 50

4.46 out of 5 based on 67 votes

2024 Utah | Frequently Asked Questions

To get a CDL Passenger endorsement in Utah, first obtain a Commercial Driver's License (CDL). Next, pass the Passenger Endorsement knowledge test. After passing the test, you'll need to complete a skills test in the type of vehicle you plan to drive. The Utah Driver License Division provides study materials and scheduling for these tests.

To obtain a CDL Passenger license in Utah, you must be at least 21 years old, possess a valid Commercial Driver's License (CDL), and pass the Passenger Endorsement knowledge test. You also need to pass a skills test in the vehicle type you plan to drive. A clean driving record and passing a medical examination are also required.

While specific training isn't legally required for a CDL Passenger endorsement in Utah, it's highly recommended. Understanding how to handle larger vehicles and passenger safety is crucial. Experience is gained through the skills test, where you'll operate the type of vehicle you plan to drive. Study materials are provided by the Utah Driver License Division.

Yes, acquiring a CDL Passenger endorsement in Utah requires passing an additional written knowledge test on top of the standard CDL exam. This test covers topics specific to transporting passengers, such as safety procedures, vehicle inspection, loading/unloading passengers, and emergency situations. Passing this test is mandatory to receive the endorsement.

During the CDL Passenger endorsement skills test in Utah, you'll need to demonstrate your ability to inspect your vehicle, check safety equipment, load and unload passengers safely, and manage emergency situations. You'll also need to show proficiency in maneuvering the vehicle, including starting, stopping, turning, and backing up.

No, you cannot legally transport passengers in Utah without a valid CDL Passenger endorsement. This endorsement is required for drivers of vehicles designed to carry 16 or more passengers, including the driver. Driving such vehicles without the proper endorsement can result in fines, license suspension, and other penalties.

Yes, you can add the CDL Passenger endorsement to your existing Commercial Driver's License (CDL). To do so, you'll need to pass the Passenger Transport Test, which includes both a knowledge test and a skills test. Once you've passed, the endorsement will be added to your CDL. You do not need to apply for a new license.

Yes, there are specific limitations for drivers with a CDL Passenger endorsement in Utah. For instance, you cannot transport passengers in a vehicle for which you don't have the proper class of CDL. Additionally, if your license has a "P" restriction, you're not allowed to operate a bus. Violating these restrictions can result in fines or loss of your CDL.

Yes, there are age-related prerequisites for acquiring the CDL Passenger endorsement in Utah. You must be at least 21 years old to drive a commercial vehicle across state lines or to carry hazardous materials. However, if you're 18 years or older, you can get a CDL for intrastate travel (within Utah only).

With a CDL Passenger endorsement in Utah, you're eligible to operate commercial vehicles designed to transport 16 or more passengers, including the driver. This includes buses, shuttle vans, and certain types of limousines. However, the specific class of your CDL (A, B, or C) may further determine the exact types of vehicles you can drive.