Knowledge Test Class B #1
Class B Driving Test | Alaska 2024 #1 Page 7 of 7
Train for FREE online with our Alaska class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AK CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
43 . During the vehicle inspection test, you will be asked to:
During the vehicle inspection test, you will be asked to do a complete inspection of your vehicle. You will need to explain what you are inspecting and why.
44 . Bracing is used to:
Blocking and bracing are used to prevent cargo from shifting in transit. Blocking is used in the front, in the back, and on the sides of a piece of cargo to prevent movement. Bracing prevents movement by reaching from the upper portion of a piece of cargo to the floor and sides of the cargo compartment.
45 . When loading cargo, weight should be placed:
A vehicle is vulnerable to tipping over if its center of gravity is too high. To prevent this, you should distribute the weight of your cargo evenly and as low as possible.
46 . When using a fire extinguisher to put out a fire, you should:
Stay as far away from a fire as possible and aim your fire extinguisher at the source or base of the fire, not at the flames. It may be appropriate to extinguish certain fires with water. If you are unsure of how to treat a specific fire, you should wait for trained firefighters to arrive.
47 . When taking the on-road driving skills test:
CDL skills tests, including the on-road test, must be taken with the type of vehicle for which you want to be licensed.
48 . The two markings on a front brake limiting valve usually read:
Some vehicles with air brake systems manufactured before 1975 have a front brake limiting valve with "normal" and "slippery" settings.
49 . What should you do if the braking system cannot build up hydraulic pressure?
If your hydraulic braking system will not build up the pressure needed to slow or stop your vehicle, there are a few possible solutions. Try shifting into a lower gear, pumping the brakes, and/or using the emergency brake.
50 . How long should it take for oil pressure to reach a normal level when starting a vehicle?
After starting a vehicle's engine, the oil pressure should come up to a normal level within seconds. Do not operate a vehicle if it has oil pressure that is low, dropping, or fluctuating.
Search the best driving school in your neighbourhood
2024 Alaska | Frequently Asked Questions
To acquire a Commercial Driver’s License (CDL) Tank endorsement in Alaska, you must first have a valid Alaska CDL. Then, study the Tank Vehicle section of the Alaska CDL manual, and pass the written knowledge test at your local DMV office. The endorsement will be added to your CDL upon successful completion of the test.
To obtain a Commercial Driver's License (CDL) Tank endorsement, you must first possess a valid CDL. It's essential to study the Tank Vehicle section of your state's CDL manual thoroughly. Afterwards, you'll need to pass a written knowledge test at your local Department of Motor Vehicles (DMV). Once you've successfully passed the test, the endorsement is added to your CDL.
While Alaska does not require specific training or experience for a CDL Tank endorsement, it's crucial to study the Tank Vehicle section of the Alaska CDL manual. You must pass a written knowledge test about tank vehicle safety, operations, and regulations. However, practical experience or training can be beneficial to pass the test and operate tank vehicles safely.
Yes, to obtain a CDL Tank endorsement in Alaska, you are required to pass an additional written test. This test is specifically designed to assess your knowledge of the safe operation of tank vehicles. The Alaska Commercial Driver License Manual provides useful information to help prepare for this test.
The written test for the CDL Tank endorsement covers various subjects relating to tank vehicles. Topics include inspecting tank vehicles, safe driving practices, managing the vehicle's weight, handling bulk packages of liquids or gases, and emergency procedures. Understanding these areas is crucial for safely operating a tank vehicle and passing the test.
The CDL Tank endorsement assessment is primarily a written test, focusing on knowledge rather than specific maneuvers. It evaluates your understanding of inspecting tank vehicles, safe driving practices, weight management, handling of liquid or gas bulk packages, and emergency procedures. However, general CDL tests will assess your practical driving skills and maneuvers.
Yes, there are limitations for drivers with a CDL Tank endorsement. They can only operate commercial motor vehicles designed to transport any liquid or gaseous materials within a tank. Also, they must comply with specific safety regulations regarding the handling and transportation of hazardous materials. Any violation of these rules can result in the suspension or revocation of the endorsement.
No, a valid Commercial Driver's License (CDL) with a Tank endorsement is required to transport liquid or gaseous materials in a tank vehicle. This endorsement ensures that drivers have the necessary knowledge and skills to handle such materials safely. Driving without the proper endorsement can result in serious penalties, including fines and license suspension.
You can add a CDL Tank endorsement to your existing Commercial Driver's License. However, you'll need to pass the tanker endorsement test, which covers specific regulations and safety measures for transporting liquid or gaseous materials. You don't need to apply for a new CDL, but there will be fees associated with adding an endorsement.
Yes, to handle hazardous materials with a CDL Tank endorsement, you must also obtain a Hazardous Materials (HazMat) endorsement. This involves passing a written test on the Federal Hazardous Materials Regulations and a TSA security threat assessment. These ensure you understand the safety procedures and risks associated with transporting hazardous materials.
