Knowledge Test Class B #1
Class B Driving Test | Alabama 2024 #1 Page 6 of 7
Train for FREE online with our Alabama class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
36 . How is water and compressor oil removed from the bottom of an air storage tank?
A sponge is used to soak up the water and oil.
Water and compressor oil are removed from air storage tanks through a drain valve. The water and oil can damage the brakes if left to accumulate in the system. Manually operated tanks must be drained every day to remove this build-up.
37 . If you are being tailgated, you should:
Allow the vehicle to pass.
If someone is tailgating you, it is a good idea to open up the space ahead of your vehicle to make it easier for the driver to pass you. Increasing your speed is not a good idea because the driver may continue to tailgate you at the higher speed, only increasing the danger.
38 . What can change the height of a vehicle?
Number of windows
The added weight of a heavy load will make a vehicle sit lower than usual. A vehicle will often be taller when carrying a light load than when carrying a heavy load. If your vehicle fits under an overpass while carrying a full load, it is not guaranteed that it will fit under the same overpass if it is empty.
39 . The best way to avoid glare at night from oncoming vehicles is to:
Use your high beams.
To avoid being blinded by the lights of oncoming vehicles, you can glance to the right side of the road until the vehicle has passed.
40 . A cardboard box on the roadway:
Almost any foreign object on the road poses some potential danger. For example, even something as seemingly harmless as a cardboard box could contain a hard or heavy object that could damage your vehicle.
41 . The application pressure gauge:
Shows the number of times the brakes have been used.
In an air brake system, the application pressure gauge shows how much air pressure is being applied to the brakes. Not all vehicles with an air brake system have this gauge.
42 . A stopped bus:
You should always exercise caution when driving near a stopped bus. There could be passengers in the vicinity and the bus may either prevent them from seeing you or you from seeing them.
2024 Alabama | Frequently Asked Questions
To acquire a CDL Tank endorsement in Alabama, you must first possess a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle Endorsement Knowledge test, which covers the proper handling and driving of tank vehicles. Studying the Alabama CDL Manual can assist in preparing for this test. After passing, you will receive the Tank endorsement on your CDL.
To obtain a CDL Tank license, it's essential to first have a Commercial Driver's License (CDL). You must then pass the Tank Vehicle Endorsement Knowledge test, which focuses on the correct handling and driving of tank vehicles. It's important to thoroughly study the Alabama CDL Manual to prepare for this test. Upon passing, you'll receive your CDL Tank endorsement.
While Alabama does not mandate specific training or experience for a CDL Tank endorsement, you must pass the Tank Vehicle Endorsement Knowledge test. This test covers the handling and driving of tank vehicles. Studying the Alabama CDL Manual can help prepare for this test. Practical experience or training could be beneficial, but it is not a legal requirement.
Yes, to obtain a CDL Tank endorsement in Alabama, you need to pass the Tank Vehicle Endorsement Knowledge test. This test is in addition to the general CDL test. It covers specific knowledge related to the safe operation and handling of tank vehicles. Studying the Alabama CDL Manual can help you prepare for this exam.
The written test for the CDL Tank endorsement in Alabama covers several topics related to tank vehicles. These include inspecting tank vehicles, driving tank vehicles, and safe handling of liquid cargo. It also includes understanding the high center of gravity in tank vehicles, checking for leaks, and emergency procedures. The Alabama CDL Manual provides detailed information on these subjects.
During the CDL Tank endorsement assessment, skills such as safe driving techniques, proper loading and unloading procedures, handling high center of gravity, and understanding outage requirements are evaluated. Additionally, applicants must demonstrate knowledge of emergency response procedures and understanding of how to inspect tank vehicles for safety issues.
Yes, drivers with a CDL Tank endorsement must follow specific rules. They must not drive a tank vehicle unless it's empty if they lack the endorsement. This also applies to tanks that were previously used to transport hazardous materials unless purged of any residue. Additionally, drivers must comply with all federal and state regulations regarding the transport of hazardous materials.
No, a valid Commercial Driver's License (CDL) with a Tank endorsement is required to transport liquid or gaseous materials in a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. Driving such vehicles without the proper endorsement is against federal and state law in Alabama.
You can add the CDL Tank endorsement to your current commercial driver's license. It is not necessary to apply for a new license. However, you will need to pass the Tank Vehicle test, and there may be additional fees involved. Always check with your local DMV for specific requirements and procedures.
Yes, handling hazardous materials requires a Hazardous Materials (HazMat) endorsement in addition to the CDL Tank endorsement. To obtain a HazMat endorsement, you must pass a written test and a Transportation Security Administration background check. It's essential to understand and comply with these regulations for safety and legal reasons.