Knowledge Test Class B #1
Class B Driving Test | Alabama 2025 #1 Page 3 of 7
Train for FREE online with our Alabama class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
15 . In a vehicle with dual parking control valves, once air pressure is lost and the spring brakes come on:
The air tanks will automatically refill to a safe air pressure level.
In a vehicle with dual parking control valves, there is a separate air tank that can be used to temporarily release the spring brakes if they have been activated due to low air pressure. Pushing in the proper control will release the spring brakes for a short period of time, allowing the driver to move the vehicle in an emergency.
16 . In a dual air brake system, air pressure should build from 85 to 100 psi within ____ seconds.
When inspecting a vehicle with a dual air brake system, you should wait for air pressure to build from 85 to 100 psi in both the primary and secondary systems. This should take about 45 seconds.
17 . If you must drive in reverse, it is helpful to:
Stick your head out the window and look backward.
If you must drive in reverse, you should first walk around the vehicle to check for hazards in your path of travel. Make frequent use of the mirrors on both sides of your vehicle while backing. Always back up as slowly as possible.
18 . A Class 1 hazardous material is:
The first hazardous materials class includes explosives such as ammunition, dynamite, and fireworks.
19 . Slow down and be extra careful:
Slow down and be especially careful when driving in and around work zones, in places where the pavement drops off sharply at the edge of the road, when foreign objects are present on the road, and on freeway on- and off-ramps.
20 . When making tight maneuvers, it is important for a driver to:
While regular mirror checks should always be part of your driving routine, you should make a particular point of checking the mirrors when changing lanes, turning, merging, or making tight maneuvers.
21 . What is removed when an air tank is drained?
In an air brake system, air tanks have drains to remove accumulations of water and compressor oil. Allowing water and oil to accumulate in the system could cause damage to the brakes.
Search the best driving school in your neighbourhood
2025 Alabama | Frequently Asked Questions
A CDL Class A license in Alabama allows holders to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the towed vehicle(s) have a GVWR of more than 10,000 pounds. This typically includes tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds.
A Class A CDL license in Alabama allows operation of combination vehicles like tractor-trailers, truck and trailer combinations, and tank vehicles. It also includes operating flatbeds, livestock carriers, and any vehicle towing another vehicle over 10,000 pounds. Basically, it covers vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more.
To obtain a Class A CDL license in Alabama, you must be at least 21 years old (18-20 years for intrastate driving), have a valid Alabama driver's license, pass a vision test, and complete a written knowledge test. Additionally, you'll need to pass a skills test which includes a pre-trip vehicle inspection, a basic controls test, and an on-road driving exam.
In Alabama, you must be at least 18 years old to qualify for a Class A CDL for intrastate driving (within Alabama only). However, if you plan to drive interstate (across state lines) or haul hazardous materials, federal regulations require you to be at least 21 years old.
Endorsements are not required for a Class A CDL license in Alabama, but they can broaden the range of vehicles you can operate. For example, a T endorsement allows you to tow double or triple trailers, an H endorsement permits hazardous materials transport, while a P endorsement allows passenger vehicle operation. These endorsements require additional testing.
The Class A CDL skills test in Alabama includes three parts: a pre-trip vehicle inspection to verify your ability to assess the safety of your vehicle, a basic controls test to evaluate your basic maneuvering skills, and an on-road driving examination to demonstrate your practical driving abilities under various traffic conditions.
Yes, Class A CDL license holders in Alabama may face certain limitations. These can be based on the driver's medical condition, driving ability or the type of vehicle driven. For example, a driver may have restrictions for not wearing corrective lenses, not driving a manual transmission, or not operating a truck with full air brakes.
In Alabama, the written Class A CDL test is primarily offered in English. However, some locations may provide the test in Spanish. It's important to note that even if the written test is passed in another language, all drivers must demonstrate a basic understanding of English to communicate with officials and complete the required forms.
Yes, you can request accommodations for the Class A CDL written test if you have a disability. The Americans with Disabilities Act requires test centers to provide reasonable accommodations. These may include extra time, a quiet room, or a reader. Contact your local DMV in Alabama to discuss your specific needs and arrange appropriate accommodations.
Yes, if you don't pass the Class A CDL written test in Alabama, you can retake it. There is a waiting period of one day before you can retake the exam. Also, you may be required to pay a retesting fee. It's advisable to study the CDL manual thoroughly before reattempting the test.
