Knowledge Test Class B #1
Class B Driving Test | Alabama 2025 #1 Page 4 of 7
Train for FREE online with our Alabama class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
22 . During a trip, gauges are:
During a trip, you should regularly check the gauge and instrument panels, mirrors, tires, cargo, and lights for signs of trouble.
23 . What should you do if the braking system cannot build up hydraulic pressure?
If your hydraulic braking system will not build up the pressure needed to slow or stop your vehicle, there are a few possible solutions. Try shifting into a lower gear, pumping the brakes, and/or using the emergency brake.
24 . Convex mirrors:
Are illegal to be used in most states.
Many large vehicles have curved, convex mirrors. Convex mirrors allow drivers to see a wider area than flat mirrors. However, they also make objects seem smaller and farther away than they really are.
25 . If the safety relief valve in the air brake system releases air:
An air brake system has a safety relief valve, which releases air from the tanks if the pressure gets too high. If the valve must operate, something in the system is wrong and should be addressed by a mechanic.
26 . When driving through fog, a driver should:
Drive on the shoulder.
If you must drive in fog, you should use your low beam headlights.
27 . During a vehicle inspection, ensure that lug nuts are all of the following, except:
Free of rust.
During a vehicle inspection test, you must ensure that all lug nuts are present, free of cracks and distortions, and showing no signs of looseness, such as rust trails or shiny threads. Verify that all bolt holes are free of cracks and distortions.
28 . How can you avoid becoming drowsy on a trip?
Schedule the trip at night.
Strategies to reduce the risk of fatigue while driving include getting seven to eight hours of sleep beforehand; scheduling trips for the hours during which you are normally awake; planning to take breaks during the trip; and exercising regularly.
2025 Alabama | Frequently Asked Questions
A CDL Class A license in Alabama allows holders to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the towed vehicle(s) have a GVWR of more than 10,000 pounds. This typically includes tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds.
A Class A CDL license in Alabama allows operation of combination vehicles like tractor-trailers, truck and trailer combinations, and tank vehicles. It also includes operating flatbeds, livestock carriers, and any vehicle towing another vehicle over 10,000 pounds. Basically, it covers vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more.
To obtain a Class A CDL license in Alabama, you must be at least 21 years old (18-20 years for intrastate driving), have a valid Alabama driver's license, pass a vision test, and complete a written knowledge test. Additionally, you'll need to pass a skills test which includes a pre-trip vehicle inspection, a basic controls test, and an on-road driving exam.
In Alabama, you must be at least 18 years old to qualify for a Class A CDL for intrastate driving (within Alabama only). However, if you plan to drive interstate (across state lines) or haul hazardous materials, federal regulations require you to be at least 21 years old.
Endorsements are not required for a Class A CDL license in Alabama, but they can broaden the range of vehicles you can operate. For example, a T endorsement allows you to tow double or triple trailers, an H endorsement permits hazardous materials transport, while a P endorsement allows passenger vehicle operation. These endorsements require additional testing.
The Class A CDL skills test in Alabama includes three parts: a pre-trip vehicle inspection to verify your ability to assess the safety of your vehicle, a basic controls test to evaluate your basic maneuvering skills, and an on-road driving examination to demonstrate your practical driving abilities under various traffic conditions.
Yes, Class A CDL license holders in Alabama may face certain limitations. These can be based on the driver's medical condition, driving ability or the type of vehicle driven. For example, a driver may have restrictions for not wearing corrective lenses, not driving a manual transmission, or not operating a truck with full air brakes.
In Alabama, the written Class A CDL test is primarily offered in English. However, some locations may provide the test in Spanish. It's important to note that even if the written test is passed in another language, all drivers must demonstrate a basic understanding of English to communicate with officials and complete the required forms.
Yes, you can request accommodations for the Class A CDL written test if you have a disability. The Americans with Disabilities Act requires test centers to provide reasonable accommodations. These may include extra time, a quiet room, or a reader. Contact your local DMV in Alabama to discuss your specific needs and arrange appropriate accommodations.
Yes, if you don't pass the Class A CDL written test in Alabama, you can retake it. There is a waiting period of one day before you can retake the exam. Also, you may be required to pay a retesting fee. It's advisable to study the CDL manual thoroughly before reattempting the test.