FREE CDL Combination Vehicles Practice Test Online | Alabama 2024 Page 3 of 3
Train for FREE online with our Alabama CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a AL combination license in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
15 . Before backing your tractor under the trailer, make sure your trailer brakes are:
Dry.
Correctly following the steps to couple and uncouple trailers is vital to safely operating a combination vehicle. Before backing your tractor under the trailer while coupling, make sure your trailer brakes are locked.
16 . Starting in which year were newly manufactured trailers required to have ABS?
2004
All trailers and converter dollies manufactured on or after March 1, 1998 must be equipped with Anti-Lock Braking Systems (ABS).
17 . Place the trailer air supply control in its "emergency" position to test:
Be sure to test the trailer emergency brakes before beginning a trip. After ensuring that the trailer rolls freely, you can test the emergency brakes by pulling out the trailer air supply control, or placing it in the "emergency" position. Pull forward slightly with the tractor and make sure the trailer does not move.
18 . Rollovers happen when drivers:
Drive illegally.
A rollover happens as a result of a driver taking a turn at too high a speed. Be sure to take turns and curves safely and slowly.
19 . When backing up while coupling a trailer, the tractor should be positioned:
When backing up to couple a trailer, you should position the tractor directly in front of the trailer. Trying to couple while backing at an angle could cause the trailer to move and the landing gear to break.
20 . When coupling a trailer:
Only one set of glad hands should be connected.
When coupling, make sure you couple matching glad hands. They are often color-coded to help drivers avoid mistakes. Typically, blue is used for service lines and red is used for emergency lines.
Search the best driving school in your neighbourhood
2024 Alabama | Frequently Asked Questions
A CDL Class B license in Alabama allows the driver to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 or more pounds, or any such vehicle towing a vehicle not in excess of 10,000 pounds GVWR. This includes straight trucks, buses, large passenger vehicles, segmented buses, and trucks towing smaller vehicles.
In Alabama, a Class B CDL license permits the operation of single vehicles with a gross vehicle weight rating (GVWR) of 26,001 or more pounds, or towing a vehicle not exceeding 10,000 pounds GVWR. This includes large buses, segmented buses, straight trucks, and trucks towing smaller vehicles such as a small trailer or boat.
To acquire a Class B CDL license in Alabama, applicants must be at least 21 years old (or 18 for intrastate travel), possess a valid Alabama driver's license, pass a vision test, and complete a written knowledge test. They must also complete a skills test in a vehicle representative of the class of CDL they are applying for.
In Alabama, you must be at least 21 years old to qualify for a Class B CDL license for interstate commerce. However, if you only intend to drive within the state (intrastate commerce), you can qualify for a Class B CDL license at 18 years old.
Specific endorsements aren't necessary for a Class B CDL license, but they can provide additional driving privileges. For instance, endorsements for passenger vehicles, school buses, tank vehicles, or hazardous materials can be added to a Class B CDL after passing specific written and skills tests. These endorsements broaden the range of vehicles you can operate.
The Class B CDL skills assessment in Alabama includes three parts: the vehicle inspection test, the basic controls test, and the road test. The vehicle inspection test assesses your ability to determine if your vehicle is safe to drive. The basic controls test evaluates your ability to maneuver and control the vehicle. Lastly, the road test assesses your on-road driving skills.
Yes, Class B CDL license holders in Alabama are limited to operating single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a vehicle towing another vehicle not exceeding 10,000 pounds GVWR. They cannot operate a combination of vehicles (like tractor-trailers) that would require a Class A CDL. Specific endorsements may also be required for certain types of vehicles or loads.
In Alabama, the written Class B CDL test is primarily offered in English. However, some locations may offer the test in Spanish. It's important to note that federal regulations require all commercial drivers to read and speak English sufficiently to communicate with the general public, understand highway traffic signs and signals, and respond to official inquiries.
Yes, you can request test accommodations for the Class B CDL written exam in Alabama if you have a disability. You'll need to provide documentation of your disability and specify the type of accommodation needed. The Alabama Law Enforcement Agency will review your request and determine if the accommodation can be provided without compromising the integrity of the test.
Yes, if you don't pass the Class B CDL written test in Alabama, you can retake it. However, you must wait at least one day before retaking the test. If you fail the test three times, you will need to start the application process over, including paying the necessary fees. It's recommended to study thoroughly to increase your chances of passing on your next attempt.
