Passenger #2
Passenger Endorsement | Washington 2026 #2 Page 2 of 3
Train for FREE with our Washington CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA DMV passenger endorsement in 2026, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
20
8 . A steering wheel should be:
A steering wheel should be held firmly with each hand on opposite sides of the wheel.
9 . When driving, you should stop every ____ to take a break to avoid becoming too tired.
To reduce the risk of becoming fatigued on a long trip, you should stop to take a break at least once for every two hours or 100 miles driven.
10 . When starting from a stop:
To avoid hitting anything behind you, make sure that your vehicle does not roll back when you start from a complete stop.
11 . Pre-trip inspections are:
Federal and state laws require drivers to inspect their vehicles before every trip, regardless of length.
12 . While passengers are on board a bus, refueling the bus in an enclosed space, allowing the bus to be towed, and conversing with the passengers are considered to be:
Bus drivers should not engage in conversation with passengers, fuel a bus inside an enclosed building, or tow or push a disabled bus with riders aboard the vehicle. These are all considered to be prohibited practices.
13 . Banked curves:
Banked curves have posted safe design speeds. These posted speeds may be safe to be driven by cars but may be unsafe to be driven by larger vehicles, like buses and trucks.
14 . During the driving test, when asked to make a lane change:
When asked to make a lane change during the on-road driving test, you should make the proper traffic checks, use your turn signal, and smoothly change lanes when it is safe to do so.
See the exact questions that will be on the 2026 Washington DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2026 Washington | Frequently Asked Questions
To obtain a CDL Tank endorsement in Washington, you first need a Commercial Driver's License (CDL). Then, study the "Transporting Cargo Safely" section of the Washington CDL manual. After studying, take the written tank vehicle test at a Department of Licensing office. If you pass, the tank endorsement will be added to your CDL.
To obtain a CDL Tank license, you first need a basic Commercial Driver's License (CDL). You then need to study the relevant sections of your state's CDL manual, focusing on transporting cargo safely. After studying, you must pass a written tank vehicle test at your local Department of Licensing office. Once passed, the tank endorsement is added to your CDL.
While specific training or experience isn't legally required to obtain a CDL Tank endorsement in Washington, it's advisable to study the "Transporting Cargo Safely" section of the CDL manual thoroughly. Experience driving similar vehicles can also be beneficial. Ultimately, you must pass a written tank vehicle test at a Department of Licensing office.
Yes, an additional written knowledge test is required for the CDL Tank endorsement. The test focuses on the specific knowledge needed to safely operate tank vehicles. This includes understanding the vehicle's handling characteristics, inspecting tank vehicles, and recognizing hazards. Studying the Commercial Driver Guide provided by the Washington State Department of Licensing will help prepare for this test.
The written test for the CDL Tank endorsement covers various topics related to safely transporting liquids and gases. Subjects include understanding bulk tank loading, unloading, and inspecting procedures, recognizing the dangers of surge, handling high center of gravity, and knowing how to control internal tank pressure among others. It's crucial to study these areas thoroughly.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. You'll be tested on understanding of safe loading and unloading procedures, handling of surge, control of internal tank pressure, and awareness of high center gravity risks. Practical driving skills are typically assessed during the general CDL skills test rather than the tank endorsement test.
Drivers with a CDL Tank endorsement must adhere to specific regulations and safety guidelines when transporting liquids or gases. They must understand the unique risks associated with this type of cargo, such as surge and high center of gravity. However, they are not restricted from driving other types of commercial vehicles unless there are additional endorsements or restrictions on their license.
No, a valid CDL Tank endorsement is required to transport liquid or gas materials in the United States. This endorsement ensures the driver has the necessary knowledge and skills to handle such materials safely. Driving without the proper endorsement can result in legal penalties, including fines and suspension of driving privileges.
The CDL Tank endorsement can be added to your current CDL. You don't need a fresh application for a new license. However, you will need to pass a knowledge test related to tank vehicle operation. Once you pass the test, the endorsement will be added to your existing CDL.
Yes, to handle hazardous materials with a CDL Tank endorsement, drivers must also have a Hazardous Materials (HazMat) endorsement. They must pass a written test regarding the safe transportation of hazardous goods and undergo a federal background check. Understanding safety protocols, emergency procedures, and federal regulations is crucial for handling these materials.
