Passenger #2
Passenger Endorsement | Utah 2024 #2 Page 3 of 3
Train for FREE with our Utah CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT DMV passenger endorsement in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
20
15 . What should be done shortly after a tire has been changed?
The driver should inflate the tire.
After changing a tire, you should stop after driving for a while to recheck the tightness of the lug nuts.
16 . Which of the following is not an indicator of when to change gears?
There are two indicators that determine when you need to shift into a higher gear. One indicator is the engine speed (rpm). You should read your vehicle's manual to learn its rpm range and shift up when you reach the top of that range. The other indicator is road speed (mph). You should learn which speeds each gear can accommodate, then keep an eye on the speedometer and shift up as needed.
17 . Noting the road speed is one way to determine when to upshift.
There are two indicators that determine when you need to shift into a higher gear. One indicator is the engine speed (rpm). You should read your vehicle's manual to learn its rpm range and shift up when you reach the top of that range. The other indicator is road speed (mph). You should learn which speeds each gear can accommodate, then keep an eye on the speedometer and shift up as needed.
18 . Tires with deep cracks are usually acceptable.
When inspecting a vehicle's tires, you should make sure that there is no damage present on the tires.
19 . Three red reflective triangles should be carried within the vehicle
When inspecting a vehicle, you should ensure that it holds proper warning devices that can be used when the vehicle is parked. These warning devices may include three reflective triangles, six fuses, or three liquid burning flares.
20 . When switching gears, what happens if you remain in neutral for too long?
The vehicle will be difficult to stop.
Remaining in neutral for too long when shifting gears may make it difficult to put the vehicle into the next gear.
2024 Utah | Frequently Asked Questions
To acquire a CDL Tank endorsement in Utah, you must first have a valid CDL. Then, you need to pass the Tank Vehicle written test at a Utah Driver License Division office. The test covers knowledge about tank vehicles, their unique properties, and how to safely operate them. Once you pass the test, the endorsement will be added to your CDL.
To obtain a CDL Tank license, you need a valid Commercial Driver's License (CDL). You must then pass the Tank Vehicle written test, which covers knowledge on the safe operation and unique properties of tank vehicles. The test is offered at Utah Driver License Division offices. Once passed, the endorsement is added to your CDL.
While specific training is not mandatory for a CDL Tank endorsement in Utah, it's highly recommended to prepare for the endorsement test. You should understand the safety protocols, inspection procedures, and driving techniques for tank vehicles. Practical experience, although not required, can also be beneficial. Always refer to Utah's CDL manual for comprehensive information.
Yes, to obtain a CDL Tank endorsement in Utah, you are required to pass an additional written test. This test focuses on the safe operation and unique properties of tank vehicles. It is separate from the general CDL test and must be taken at a Utah Driver License Division office.
The written test for a CDL Tank endorsement covers various subjects related to tank vehicles. This includes the inspection and maintenance of tank vehicles, understanding bulk packaging markings, driving stability and handling, safe driving rules, and emergency response procedures. The test is designed to ensure drivers can safely operate tank vehicles.
During the CDL Tank endorsement assessment in Utah, several skills and maneuvers are assessed. These include inspecting the tank vehicle for safety, proper loading and unloading procedures, controlling the vehicle's speed and braking, maneuvering through turns and curves, and maintaining control during emergency situations. Additionally, knowledge of hazardous materials regulations and proper handling procedures is also evaluated.
Yes, drivers with a CDL Tank endorsement must adhere to specific regulations. They must ensure the load is properly balanced and secure, follow all safety procedures when loading and unloading, and handle hazardous materials carefully. Additionally, they must comply with hours-of-service regulations to prevent driver fatigue. Violation of these rules can result in fines, suspension, or revocation of the endorsement.
No, a valid CDL Tank endorsement is required to transport liquid or gas materials. This ensures the driver is knowledgeable and skilled in handling such materials, which can pose unique challenges and risks. Driving without the necessary endorsement is illegal and can result in serious penalties, including fines and suspension of the driver's CDL.
Yes, a CDL Tank endorsement can be added to your current commercial driver's license. You don't need to apply for a new license. However, you will need to pass the tank vehicle written test and pay the required fee. The endorsement allows you to transport liquid or gas materials in a tank vehicle. Always ensure you comply with all regulations.
Yes, to handle hazardous materials in Utah, you must have both a CDL Tank endorsement and a Hazardous Materials (HazMat) endorsement. Getting the HazMat endorsement involves passing a knowledge test, undergoing a TSA background check, and fingerprinting. This ensures that drivers are trained to handle these materials safely and understand the associated risks and precautions.