Passenger #1
Passenger Endorsement | Utah 2024 #1 Page 3 of 3
Train for FREE with our Utah CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a UT DMV passenger endorsement in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
20
15 . The most important reason to do a pre-trip inspection is that it helps ensure safety.
The most important reason to inspect your vehicle before a trip is to ensure the safety of yourself and others on the road.
16 . Drivers may use ____ red reflective warning triangles when their vehicle is stopped on the side of the road.
Seven
If a vehicle carries red reflective triangles, the driver should place three of them as warning devices when the vehicle is parked on the road.
17 . Rough acceleration:
Should be used to prevent rust from forming.
Always accelerate smoothly and gradually so that your vehicle does not jerk. Rough acceleration can cause mechanical damage.
18 . Three red reflective triangles should be carried within the vehicle
When inspecting a vehicle, you should ensure that it holds proper warning devices that can be used when the vehicle is parked. These warning devices may include three reflective triangles, six fuses, or three liquid burning flares.
19 . The person responsible for the safe transport of cargo is the driver.
The driver of a vehicle is responsible for the safe transport of its cargo, regardless of who loaded the vehicle.
20 . Dual tires should be in contact with each other.
When inspecting a vehicle's tires, you should ensure that dual tires do not come into contact with each other or with other parts of the vehicle.
Search the best driving school in your neighbourhood
2024 Utah | Frequently Asked Questions
To secure a CDL Doubles/Triples endorsement in Utah, you first need a valid Commercial Driver's License (CDL). Next, study the Doubles and Triples section of the Utah CDL handbook. Then, schedule and pass the Doubles/Triples knowledge test at a Driver License Division office. After passing the test, you'll receive your endorsement. Remember, driving experience with these types of vehicles is beneficial.
To obtain a CDL Doubles/Triples license, you need a valid Commercial Driver's License (CDL). Study the Doubles and Triples section of your state's CDL handbook. Then, schedule and pass the Doubles/Triples knowledge test at your local driving license office. Upon passing, you will receive your endorsement. It's also recommended to have hands-on experience with these types of vehicles.
While it's not a legal requirement to have specialized experience or training for a CDL Doubles/Triples endorsement, it's highly recommended. This is because driving these types of vehicles requires specific skills. Studying the Doubles/Triples section of the CDL handbook and passing the knowledge test is mandatory, but practical experience can significantly improve safety and confidence.
Yes, to receive a CDL Doubles/Triples endorsement in Utah, you must pass an additional written knowledge test specifically for Doubles/Triples. This test covers the special procedures and safety considerations associated with operating these types of vehicles. It is separate from the general CDL written test. You can prepare by studying the Doubles/Triples section of your state's CDL handbook.
For the CDL Doubles/Triples endorsement, there isn't a specific skills or maneuvers test as there is with the basic CDL. The endorsement only requires a written knowledge test. However, the test will cover topics like coupling and uncoupling, inspecting doubles and triples, and managing the vehicles during different situations. These are skills you'll need to safely operate these vehicles.
No, it is not permissible to operate double or triple trailers without a valid CDL Doubles/Triples endorsement in Utah. The endorsement is required by federal and state law to ensure that drivers have the necessary skills and knowledge to safely operate these types of vehicles. Driving without the appropriate endorsement can result in fines and penalties.
You can append the CDL Doubles/Triples endorsement to your current commercial driver's license. You don't need to initiate a new application for a CDL. However, you'll need to pass the Doubles/Triples knowledge test. After passing, the endorsement will be added to your existing CDL. Remember, there's no skills test for this endorsement in Utah.
Yes, there are some limitations for drivers with a CDL Doubles/Triples endorsement. For instance, they can only drive vehicles that their base CDL allows. Additionally, all federal and state regulations regarding hours of service, vehicle maintenance, and safety inspections must be followed. Violating these rules can result in penalties or loss of the endorsement.
In Utah, double trailers can be up to 81 feet long and triple trailers up to 105 feet long. The maximum weight for both is 129,000 pounds. However, these limits can vary depending on the specific highways and routes used. Drivers should always check local regulations and restrictions before operating these types of vehicles.
Yes, drivers with a CDL Doubles/Triples endorsement must follow specific safety guidelines. These include checking that all couplings are secure, maintaining extra following distance, and taking wider turns to avoid trailer off-tracking. Also, they must be aware of the "crack-the-whip" effect, which can cause a rollover. Federal regulations also apply, such as hours-of-service rules.
