Knowledge Test Class B #2
Class B Driving Test | Oklahoma 2025 #2 Page 2 of 7
Train for FREE online with our Oklahoma class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OK CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
8 . If you plan to transport hazardous materials, you will:
You must have a hazardous materials endorsement to transport any hazardous materials that require the vehicle to be placarded.
9 . What is axle weight?
"Axle weight" refers to the weight transmitted to the ground by one axle or one set of axles.
10 . When starting the engine of a truck with a trailer, you can tell that your vehicle's ABS is not working if:
When turning on your vehicle's engine, the lights on the dash should come on and then turn off. If the ABS malfunction light stays on, the system is not working properly. In the case of a truck with a trailer, if the yellow light on the left rear of the trailer stays on once the engine has been started, the system is not working properly.
11 . When pulled over to the side of the road, you should:
When stopped on the side of the road, be sure to turn on your vehicle's four-way emergency flashers, especially during times of lowered visibility. Place warning devices within 10 minutes of being stopped.
12 . If you identify a distracted driver on the road, you should:
If you encounter a driver who seems distracted on the road, you should give them plenty of room and maintain a safe following distance.
13 . Most heavy trucks with manual transmissions require ____ to change gears.
Most heavy vehicles with manual transmissions require double clutching to shift gears. Learning to effectively change gears by double clutching takes practice.
14 . Wheel rims that have been welded should:
Wheels or rims that have had welding repairs are not safe to be used.
See the exact questions that will be on the 2025 Oklahoma DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 Oklahoma | Frequently Asked Questions
To acquire a CDL Tank endorsement in Oklahoma, you first need a Commercial Driver's License (CDL). Then, study the state's CDL manual section on Tank Vehicles. After studying, you'll take a written knowledge test at a Department of Public Safety testing facility. Passing this test grants you the Tank endorsement on your CDL.
To obtain a CDL Tank license, you must first have a Commercial Driver's License (CDL). It's essential to study the Tank Vehicles section in the state's CDL manual. You'll then need to pass a written knowledge test at a Department of Public Safety testing facility. On passing, you'll receive the Tank endorsement on your CDL.
Specific training or experience isn't mandatory for a CDL Tank endorsement in Oklahoma. However, you need to study the Tank Vehicles section in the state's CDL manual. After that, pass a written knowledge test at a Department of Public Safety testing facility. It's also beneficial to have practical experience driving commercial vehicles.
Yes, to obtain a CDL Tank endorsement in Oklahoma, you must pass an additional written knowledge test focused on tank vehicles. This test covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules. The information for the test can be found in the Oklahoma CDL manual's Tank Vehicles section.
The written test for a CDL Tank endorsement in Oklahoma covers various topics including: how to inspect tank vehicles, recognizing high center of gravity and its effects, handling bulk tanks, and understanding the dangers of surge. It also includes rules for safe driving, loading and unloading, and emergency procedures. The Oklahoma CDL manual provides further details.
The CDL Tank endorsement assessment in Oklahoma focuses on knowledge rather than specific driving maneuvers. It evaluates your understanding of inspecting tank vehicles, handling surge, recognizing the high center of gravity, safe driving practices, and emergency procedures. However, you must still demonstrate proficient general driving skills during your CDL road test.
Drivers with a CDL Tank endorsement must adhere to strict safety regulations due to the hazardous nature of the materials often transported. These include limitations on speed, specific loading/unloading procedures, and mandatory rest periods to prevent fatigue. Violations can result in fines, license suspension, or even revocation of the CDL endorsement.
No, liquid or gas materials cannot be transported without a valid CDL Tank endorsement in Oklahoma. This endorsement is required for drivers operating a commercial vehicle that is designed to transport any liquid or gaseous materials within a tank. Driving without the necessary endorsements can result in significant fines and penalties.
To add the CDL Tank endorsement to your current license in Oklahoma, you will need to complete the Tanker Vehicle Endorsement Application and pay the required fee. You may also need to pass a knowledge test specific to tank vehicles. If you meet the requirements, you can add the endorsement to your existing license without having to submit a fresh application.
Yes, handling hazardous materials with a CDL Tank endorsement in Oklahoma requires adherence to specific regulations. Drivers must pass the Hazmat Endorsement Knowledge Test and a TSA background check. They also need to follow safety protocols while loading, unloading, and transporting hazardous materials. Non-compliance can lead to penalties, including loss of endorsement.
