Bus #1
Bus Driver Testing | New York 2025 #1 Page 2 of 3
Train for FREE online with our NY bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in New York in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
8 . Small amounts of a hazardous material may be transported on a bus if:
There is no inclement weather in the forecast.
Small amounts of hazardous materials may be carried on a bus if there is no other way to transport them. However, there are certain categories of materials that may not be carried on a bus in any quantity.
9 . Before driving, access panels should be:
Closed.
You should always inspect the outside of your bus before driving. During this inspection, make sure to close all emergency exits and access panels.
10 . Properly adjusted outside mirrors should allow a bus operator to see how far behind their bus?
Four bus lengths
The left and right side flat mirrors on the outside of a school bus should be adjusted so that the driver can see 200 feet (or four bus lengths) behind the bus.
11 . Students should board a school bus:
However they want to. It makes no difference.
Students should board a school bus slowly while in a single-file line and holding the handrails.
12 . How can you tell if a bus is traveling around a banked curve at too high a speed?
An alarm will go off on the bus's dashboard.
If a bus is leaning toward the outside of a banked curve, it is being driven around the curve at too high a speed. Drivers should reduce their speeds when approaching curves, especially when operating large vehicles, such as buses.
13 . Drivers should try to stop ____ away from students at a bus stop.
Less than 10 feet
A school bus should stop at least 10 feet away from students who are being picked up at a bus stop. This forces the students to walk toward the bus, allowing the driver to observe their movements and better monitor their locations.
14 . There are blind spots ____ left and right side flat mirrors.
To the left of
There are blind spots immediately below and in front of each outside flat mirror. These mirrors have another blind spot directly behind the rear bumper.
2025 New York | Frequently Asked Questions
In New York, to acquire a CDL Tank endorsement, you must first have a Commercial Driver's License (CDL). Afterward, study the tank endorsement section of the NY CDL manual. Then, schedule and pass the tank endorsement written test at a DMV office. The test typically covers topics like inspecting tank vehicles, driving tank vehicles, and safe driving rules.
To obtain a CDL Tank license, the essential steps are: possessing a valid Commercial Driver's License (CDL), studying the tank endorsement section of your state's CDL manual, and passing the tank endorsement written test at your local DMV office. This test usually covers topics such as inspecting and driving tank vehicles, and following safe driving rules.
While specific training or prior experience isn't mandatory for a CDL Tank endorsement, it's highly recommended. Understanding the handling characteristics of tank vehicles and knowing how to inspect them is crucial. Studying the tank endorsement section of your state's CDL manual and possibly taking a training course can greatly improve your chances of passing the endorsement test.
Yes, to obtain a CDL Tank endorsement, you must pass the Tank Vehicle (N) endorsement knowledge test. This written exam tests your knowledge on safety rules and regulations related to tank vehicles. It's recommended to study the Tank Vehicle section of the CDL manual to prepare for this test.
The written test for the CDL Tank endorsement includes subjects such as hazardous materials regulations, safe driving practices, tank vehicle inspection, and proper loading and unloading procedures. It also covers topics like emergency response, tanker truck rollover prevention, and the use of baffles and surge suppressors.
The CDL Tank endorsement assessment primarily focuses on the driver's understanding and ability to handle liquid cargo. It evaluates the driver's knowledge of high center of gravity, surge, baffles, outage, inspecting tank vehicles, and safe driving rules. It doesn't typically involve specific maneuvers but will assess your overall control and safety practices when operating a tank vehicle.
Drivers with a CDL Tank endorsement must adhere to specific regulations. They cannot operate a tank vehicle with a capacity of 1,000 gallons or more if they are under 21 years old. Also, they must pass a specific written test to obtain the endorsement. Additionally, they are subject to random drug and alcohol testing and must maintain a clean driving record.
No, a driver cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required for operating a commercial vehicle that is designed to transport any liquid or gaseous materials within a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
The CDL Tank endorsement can be added to your current CDL. You don't need to apply for a new license. However, you will have to pass the Tank Vehicle written test. After passing the test, the endorsement will be added to your CDL, allowing you to legally operate tank vehicles.
Yes, handling hazardous materials with a CDL Tank endorsement requires additional regulations. Drivers must obtain a Hazardous Materials (HazMat) endorsement, which involves passing a written test and a TSA background check. Also, these drivers must follow specific safety procedures for loading, unloading, and transporting hazardous materials to prevent accidents or spills.