Bus #1
Bus Driver Testing | New Mexico 2025 #1
Train for FREE online with our NM bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in New Mexico in 2025, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
1 . If you are stopped at a railroad crossing while operating a school bus, you should:
When stopped at a railroad crossing while operating a school bus, do not rely only on signals to tell you if a train is approaching. You should silence all passengers, open the front door, and look and listen for trains. After a train has passed, you should check for another train approaching from either direction before you proceed across the tracks.
2 . For a basic vehicle control skills test, you are expected to be able to:
Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.
3 . When exiting a vehicle, it is important to maintain ____ with your vehicle at all times.
As you exit your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
4 . When boarding a school bus, students should:
Students should board a school bus slowly and in a single-file line. For safety, boarding students should use the handrail.
5 . If your bus is equipped with a roof-mounted strobe light, it should be used:
If equipped, a school bus's roof-mounted strobe light should be used when conditions create an environment of limited visibility.
6 . Before evacuating a bus in response to a hazard, a driver should:
If time permits, before deciding to evacuate a school bus, the driver should contact their dispatcher to explain the situation. The decision to evacuate must be a timely one.
7 . School buses:
In general, school buses manufactured after 1998 or 1999 must be equipped with an Anti-Lock Braking System (ABS). Many older buses are equipped with ABS as well.
Search the best driving school in your neighbourhood
2025 New Mexico | Frequently Asked Questions
To acquire a CDL Tank endorsement in New Mexico, you need to pass the Tank Vehicle section of the New Mexico CDL test. You must also possess a valid New Mexico commercial driver's license (CDL). Studying the CDL manual and taking practice tests can help prepare you for the examination. Ensure to pay the required fees for testing and endorsement.
To obtain a CDL Tank license, you must hold a valid CDL. You'll need to pass the Tank Vehicle section of your state's CDL exam. Preparation involves studying your state's CDL manual, particularly the sections dedicated to tank vehicles. Also, ensure you meet any physical requirements and pay necessary fees for testing and obtaining the endorsement.
While specific training is not legally required to obtain a CDL Tank endorsement, it's highly recommended. Experience driving similar vehicles can be beneficial. You must pass the Tank Vehicle section of the CDL exam, so studying the CDL manual and taking practice tests will be crucial. Training can help you gain practical skills and knowledge to pass the exam.
Yes, to get a CDL Tank endorsement, you must pass the Tank Vehicle section of the CDL exam. This is an additional written test that covers specific knowledge related to operating tank vehicles, such as handling high center of gravity and inspecting tank vehicles. The test is separate from the general CDL exam and specific to your state's regulations.
The CDL Tank endorsement written test covers specific knowledge related to operating tank vehicles. Topics include: understanding bulk tanks, inspecting tank vehicles, driving tank vehicles (including high center of gravity handling), and safe loading and unloading procedures. The test is designed to ensure drivers can safely operate these types of commercial vehicles.
The CDL Tank endorsement doesn't involve a specific skills or maneuvers assessment. The endorsement is based on a written test only. However, the general CDL skills test, which you must pass prior to any endorsement tests, evaluates your ability to inspect your vehicle, basic control skills, and on-road driving, which would apply to tank vehicles as well.
Drivers with a CDL Tank endorsement must comply with federal and state-specific regulations for transporting hazardous materials. They must ensure the tank's weight does not exceed the vehicle's Gross Vehicle Weight Rating. Also, they must understand how to handle different liquid cargos safely, and know how to respond in case of emergencies or spills.
No, you cannot transport liquid or gas materials without a valid CDL Tank endorsement. The endorsement is required for drivers who operate commercial motor vehicles that are designed to transport any liquid or gaseous materials within a tank or tanks having an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more.
The CDL Tank endorsement can be added to your current CDL license without needing a fresh application. You'll need to pass the Tank Vehicle written test. Once you pass the test, the endorsement will be added to your existing CDL. Remember, fees may apply for adding endorsements.
Yes, specific regulations are in place for handling hazardous materials with a CDL Tank endorsement. In addition to the tank endorsement, you will need a Hazardous Materials (HazMat) endorsement. This requires passing a written test, a TSA background check, and adhering to stringent safety regulations due to the potential risks associated with transporting hazardous materials.
