Air Brakes #1
Air Brakes Endorsement Test | New Hampshire 2024 #1 Page 3 of 4
Train for FREE online with our New Hampshire CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NH Class A/Class B driver license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
13 . Pressing and releasing a brake pedal unnecessarily can:
Create a loud noise.
In an air brake system, pressing and releasing the brake pedal unnecessarily can release air from the braking system faster than the compressor can replace it.
14 . To use the stab braking method in an emergency situation, you should:
Apply the emergency brake.
The stab braking method for emergency stops involves fully applying the brakes until they lock up. The brakes are then released until the wheels start rolling, then the process is repeated.
15 . When leaving your vehicle unattended:
Always apply the parking brake when leaving your vehicle unattended.
16 . If the safety relief valve in the air brake system releases air:
An air brake system has a safety relief valve, which releases air from the tanks if the pressure gets too high. If the valve must operate, something in the system is wrong and should be addressed by a mechanic.
17 . Service brakes should:
Before driving, you should always verify that your service brakes are in good working order. Testing the brakes before a trip allows you to locate any problems before you need to brake while on the road.
18 . An air brake-equipped vehicle traveling at a speed of 55 mph under ideal driving conditions will need approximately ____ to come to a complete stop.
450 feet
A vehicle's total stopping distance is made up of perception distance, reaction distance, brake lag distance, and braking distance. With all of these factors included, an air brake-equipped vehicle traveling at a speed of 55 mph under ideal driving conditions will need approximately 450 feet to come to a complete stop.
Search the best driving school in your neighbourhood
2024 New Hampshire | Frequently Asked Questions
A CDL Class A license in New Hampshire is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the towed vehicle(s) have a GVWR of more than 10,000 pounds. This includes tractor-trailers and truck and trailer combinations.
With a Class A CDL license in New Hampshire, you can operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds. The license allows you to drive any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more.
To obtain a Class A CDL in New Hampshire, you must be at least 18 years old (21 for interstate driving), possess a valid New Hampshire driver's license, pass a vision test, and successfully complete a written knowledge test. Additionally, you must pass a skills test which includes a pre-trip vehicle inspection, a basic controls test, and an on-road driving examination.
In New Hampshire, you must be at least 18 years old to qualify for a Class A Commercial Driver's License (CDL) for intrastate driving, which means driving only within the state. However, to drive across state lines or handle hazardous materials, you must be at least 21 years old.
Specific endorsements are not required for a Class A CDL license, but they can provide additional privileges. For example, a Hazmat endorsement allows the transportation of hazardous materials, while a Tanker endorsement permits the operation of tank vehicles. These endorsements require additional written exams. The School Bus endorsement requires both written and skills tests.
The Class A CDL skills test in New Hampshire encompasses a pre-trip vehicle inspection to assess your ability to determine if your vehicle is safe to drive. You'll also undergo a basic controls test to evaluate your ability to control the vehicle. Lastly, you'll take an on-road driving examination to demonstrate your practical driving skills in various traffic situations.
Yes, Class A CDL license holders in New Hampshire may face restrictions based on their driving ability or the type of vehicle they tested in. For instance, if a driver takes the test in an automatic transmission vehicle, they'll be restricted to driving automatics. Other restrictions may relate to air brakes, passengers, or hazardous materials.
In New Hampshire, the written Class A CDL test is primarily offered in English. However, some locations may offer the test in Spanish. It's important to note that all CDL applicants must be able to read and speak English well enough to converse, understand traffic signs, respond to official inquiries, and make entries on reports and records.
Yes, individuals with disabilities can request accommodations for the Class A CDL written test in New Hampshire. The Division of Motor Vehicles is committed to complying with the Americans with Disabilities Act (ADA). Accommodations may include extended time, a quiet room, or a reader. Requests should be made in advance to ensure proper arrangements.
Yes, if you fail the Class A CDL written test in New Hampshire, you can retake it. However, you must wait ten days between each attempt. There's no limit to the number of times you can retake the test, but each attempt requires payment of a retest fee. It's advised to study thoroughly before retesting.
