Knowledge Test Class B #2
Class B Driving Test | Montana 2025 #2 Page 7 of 7
Train for FREE online with our Montana class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
43 . During a pre-trip inspection, belts in the engine compartment should be:
Left alone and not inspected.
During a pre-trip inspection, belts in the engine compartment should be checked for tightness and excessive wear.
44 . Convex mirrors:
Are illegal to be used in most states.
Many large vehicles have curved, convex mirrors. Convex mirrors allow drivers to see a wider area than flat mirrors. However, they also make objects seem smaller and farther away than they really are.
45 . If you realize you may be running late to your destination, you should:
To reduce the risk of developing aggressive driving behavior, you should take measures to manage your stress. One strategy to do this is to simply take a deep breath and accept your circumstances if you realize you will be late to your destination.
46 . If you are being tailgated, you should:
Allow the vehicle to pass.
If you are being tailgated, it is best to allow more room to open up in front of your vehicle. This will help you avoid the need for sudden stops, which could result in the tailgater rear-ending you, and will make it easier for the tailgater to pass. Speeding up may only make things more dangerous by prompting the other driver to continue tailgating you at a higher speed.
47 . A CMV should:
Have a fire extinguisher and other emergency equipment.
All commercial motor vehicles are required to be equipped with the proper emergency equipment. This may include spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and at least one properly charged and rated fire extinguisher.
48 . Which of the following is not an example of a distracted person that motorists should be worried about?
A person sitting on a bench waiting for a bus
Be cautious when driving near people who are not paying attention to the road. Be wary of road workers, drivers who are engaged in conversation with passengers, and children near the road.
49 . Stopping distance can be affected by:
Traffic.
Factors that can affect your vehicle's stopping distance include driving speed, the vehicle's weight, and the slipperiness of the road surface.
50 . When checking the engine compartment, you should check all of the following, except:
The fuel level.
When inspecting your vehicle's engine compartment, be sure to check the oil level; the radiator coolant level and the condition of the hoses; the power steering fluid level and the condition of the hoses, if applicable; the windshield washer fluid level; the battery connections, fluid level, and tie-downs; the automatic transmission fluid level; and the condition and tightness of the belts. Additionally, check for any leaks in the engine compartment and cracked or worn electrical wiring insulation.
See the exact questions that will be on the 2025 Montana DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 Montana | Frequently Asked Questions
To acquire a CDL Tank endorsement in Montana, you must first have a Commercial Driver's License (CDL). After that, study for the tank endorsement test using the Montana CDL manual. Schedule and pass the written test at your local Montana Motor Vehicle Division. Upon passing, you'll receive your tank endorsement. Fees may apply.
To obtain a CDL Tank license, you must first hold a valid Commercial Driver's License (CDL). Then, prepare for the tank endorsement test using the appropriate study materials, such as the state's CDL manual. After studying, schedule and pass the written test at your local Motor Vehicle Division. A fee is typically required for this process.
Specific training or experience isn't mandatory for a CDL Tank endorsement in Montana. However, studying the CDL manual thoroughly is strongly recommended to pass the written test. Practical experience or training could also be beneficial for understanding the unique handling characteristics and safety considerations of driving a tank vehicle.
Yes, to obtain a CDL Tank endorsement in Montana, you'll need to pass an additional written test. This test covers specific knowledge related to the safe operation and handling of commercial tank vehicles. Studying the relevant sections of your state's CDL manual is crucial to pass this test.
The written test for the CDL Tank endorsement in Montana covers subjects like inspecting tank vehicles, safe driving for tank vehicles, safe loading and unloading procedures, and understanding the special characteristics of tanks. You'll also learn about handling emergencies, including different types of hazardous materials spills.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific driving maneuvers. It evaluates your understanding of inspecting tank vehicles, recognizing high center of gravity and its impact, maintaining safe control on curves, turns, and railroad crossings, and managing emergency situations like hazardous spills. It's about ensuring you can safely operate a tank vehicle under various conditions.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They are only allowed to operate commercial tank vehicles and are restricted from transporting hazardous materials unless they also have a Hazmat endorsement. Additionally, they must comply with all federal and state regulations regarding transport of liquids and gases.
No, drivers cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required by federal regulations to ensure that drivers are properly trained and understand the safety precautions necessary when transporting these types of materials. Violating this requirement can result in severe penalties.
The CDL Tank endorsement can be added to your existing Commercial Driver's License (CDL). You don't need to apply for a new license. However, you will need to pass the Tank Vehicle endorsement written test. Once you pass, the endorsement is added to your existing CDL. Be sure to check with your local DMV for any specific state requirements.
Yes, there are specific regulations and prerequisites for handling hazardous materials with a CDL Tank endorsement in Montana. These include passing the CDL written test for hazardous materials, undergoing a TSA background check, completing a hazardous materials endorsement application, and paying the required fees. Additionally, individuals must meet certain age and experience requirements and adhere to federal regulations for transporting hazardous materials.
