Knowledge Test Class B #1
Class B Driving Test | Montana 2025 #1 Page 7 of 7
Train for FREE online with our Montana class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MT CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
43 . When nearing a construction worker who is close to the road, you should:
Wait until the construction is complete before proceeding.
When driving through work zones, you should make a particular point of reducing your speed when workers are on or near the road.
44 . Which of the following is not acceptable emergency equipment?
Four yellow squares
During the vehicle inspection test, you will need to show emergency equipment, including spare electrical fuses; three red reflective triangles, six fuses, or three liquid burning flares; and a properly charged and rated fire extinguisher.
45 . Before beginning downhill, you should:
Rely only on braking to reduce your speed.
On a steep downgrade, you must use the engine's braking effect as your primary method of speed control. Be sure to decelerate and downshift appropriately before beginning to drive down the hill. Relying too heavily on the brakes may cause them to overheat and fade, becoming less effective.
46 . A vehicle equipped with an Anti-Lock Braking System (ABS) uses a ____ light to warn that the system is not working properly.
White
Anti-Lock Braking System (ABS) malfunction lamps are usually yellow. Even if the ABS isn't working properly, a driver will still have access to the vehicle's usual braking functions.
47 . When turning, when should the turn signal be canceled?
Always signal continuously through a turn. Do not cancel a signal until the turn is finished.
48 . A driver should always:
Drive faster than the posted speed limit.
While driving, you should continually scan the road to spot potential hazards in advance. Make emergency plans for how to deal with the hazards if they become dangerous.
49 . For a basic vehicle control skills test, you are expected to be able to:
Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.
50 . When checking the engine compartment, you should check all of the following, except:
The fuel level.
When inspecting your vehicle's engine compartment, be sure to check the oil level; the radiator coolant level and the condition of the hoses; the power steering fluid level and the condition of the hoses, if applicable; the windshield washer fluid level; the battery connections, fluid level, and tie-downs; the automatic transmission fluid level; and the condition and tightness of the belts. Additionally, check for any leaks in the engine compartment and cracked or worn electrical wiring insulation.
See the exact questions that will be on the 2025 Montana DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 Montana | Frequently Asked Questions
To acquire a CDL Tank endorsement in Montana, you must first have a Commercial Driver's License (CDL). After that, study for the tank endorsement test using the Montana CDL manual. Schedule and pass the written test at your local Montana Motor Vehicle Division. Upon passing, you'll receive your tank endorsement. Fees may apply.
To obtain a CDL Tank license, you must first hold a valid Commercial Driver's License (CDL). Then, prepare for the tank endorsement test using the appropriate study materials, such as the state's CDL manual. After studying, schedule and pass the written test at your local Motor Vehicle Division. A fee is typically required for this process.
Specific training or experience isn't mandatory for a CDL Tank endorsement in Montana. However, studying the CDL manual thoroughly is strongly recommended to pass the written test. Practical experience or training could also be beneficial for understanding the unique handling characteristics and safety considerations of driving a tank vehicle.
Yes, to obtain a CDL Tank endorsement in Montana, you'll need to pass an additional written test. This test covers specific knowledge related to the safe operation and handling of commercial tank vehicles. Studying the relevant sections of your state's CDL manual is crucial to pass this test.
The written test for the CDL Tank endorsement in Montana covers subjects like inspecting tank vehicles, safe driving for tank vehicles, safe loading and unloading procedures, and understanding the special characteristics of tanks. You'll also learn about handling emergencies, including different types of hazardous materials spills.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific driving maneuvers. It evaluates your understanding of inspecting tank vehicles, recognizing high center of gravity and its impact, maintaining safe control on curves, turns, and railroad crossings, and managing emergency situations like hazardous spills. It's about ensuring you can safely operate a tank vehicle under various conditions.
Yes, there are certain limitations for drivers with a CDL Tank endorsement. They are only allowed to operate commercial tank vehicles and are restricted from transporting hazardous materials unless they also have a Hazmat endorsement. Additionally, they must comply with all federal and state regulations regarding transport of liquids and gases.
No, drivers cannot transport liquid or gas materials without a valid CDL Tank endorsement. This endorsement is required by federal regulations to ensure that drivers are properly trained and understand the safety precautions necessary when transporting these types of materials. Violating this requirement can result in severe penalties.
The CDL Tank endorsement can be added to your existing Commercial Driver's License (CDL). You don't need to apply for a new license. However, you will need to pass the Tank Vehicle endorsement written test. Once you pass, the endorsement is added to your existing CDL. Be sure to check with your local DMV for any specific state requirements.
Yes, there are specific regulations and prerequisites for handling hazardous materials with a CDL Tank endorsement in Montana. These include passing the CDL written test for hazardous materials, undergoing a TSA background check, completing a hazardous materials endorsement application, and paying the required fees. Additionally, individuals must meet certain age and experience requirements and adhere to federal regulations for transporting hazardous materials.
