Air Brakes #2
Air Brakes Endorsement Test | Kentucky 2025 #2 Page 4 of 4
Train for FREE online with our Kentucky CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a KY Class A/Class B driver license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.
25
20
20
19 . If the low air pressure warning signal comes on in a vehicle with air brakes, the driver should:
If the low air pressure warning signal comes on while you are operating a vehicle with air brakes, you should stop and safely park the vehicle as soon as possible. It is essential that you are able to stop safely while you still have some braking power remaining.
20 . Once the air tanks are at an air pressure level of 125 psi, the air compressor governor will:
An air compressor governor will stop the compressor from pumping air once the air tanks are at an air pressure level around 125 psi. This air pressure level is referred to as the "cut-out" level.
21 . During an applied leakage test, the maximum leakage rate for a double combination vehicle is ____ in a minute.
It is important to know the maximum air loss rate that is safe for your specific vehicle. A double combination vehicle should have a leakage rate no higher than 4 psi in a minute during an applied leakage test.
22 . In a dual air brake system, air pressure should build from 85 to 100 psi within ____ seconds.
When inspecting a vehicle with a dual air brake system, you should wait for air pressure to build from 85 to 100 psi in both the primary and secondary systems. This should take about 45 seconds.
23 . An alcohol evaporator is especially important:
Some air brake systems contain an alcohol evaporator. This evaporator introduces alcohol into the system to help prevent ice from forming in cold weather.
24 . Do not operate a vehicle if any brake drums have cracks that are larger than ____ of the width of the friction area.
Before beginning a trip, it is important to check the brake drums during your walk-around inspection. It is unsafe to drive if any brake drum has a crack more than one half of the width of the friction area.
25 . How much distance will an air brake-equipped vehicle need to come to a complete stop if it is traveling at 55 mph under ideal driving conditions?
A vehicle's total stopping distance is made up of perception distance, reaction distance, brake lag distance, and braking distance. With all of these factors included, an air brake-equipped vehicle traveling at a speed of 55 mph under ideal driving conditions will need approximately 450 feet to come to a complete stop.
See the exact questions that will be on the 2025 Kentucky DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 Kentucky | Frequently Asked Questions
To get a CDL Hazmat endorsement in Kentucky, you must first have a valid Commercial Driver's License (CDL). Then, pass the Hazardous Materials Endorsement Knowledge Test. After passing, you'll need to complete a federal security threat assessment application through the Transportation Security Administration (TSA), including fingerprinting and a background check. Once cleared, your Hazmat endorsement will be added to your CDL.
To obtain a CDL Hazmat license, you must first have a valid Commercial Driver's License (CDL). You must pass the Hazardous Materials Endorsement Knowledge Test. Additionally, you must complete a federal security threat assessment application through the Transportation Security Administration (TSA), which includes fingerprinting and a background check. You must also be at least 21 years old.
When applying for a CDL Hazmat endorsement, you'll need to provide proof of U.S. citizenship or lawful permanent residency (like a birth certificate or green card), a valid CDL, and proof of state residency. You will also need to complete the Hazardous Materials Endorsement application and pass the TSA's security threat assessment, which includes fingerprinting and a background check.
Yes, there is a dedicated written test for the CDL Hazmat endorsement. This test is known as the Hazardous Materials Endorsement Knowledge Test. It covers topics such as how to recognize hazardous materials, how to safely load and unload such materials, and what to do in case of an emergency situation.
The CDL Hazmat endorsement written test covers a range of topics related to hazardous materials. These include identifying different types of hazardous materials, understanding Hazmat placards and labels, packing and loading procedures, emergency response, and safety regulations. It also tests knowledge on transporting specific types of hazardous materials. Studying the Hazmat section in the CDL Manual is crucial for preparation.
Yes, there are extra charges associated with acquiring a CDL Hazmat endorsement in Kentucky. In addition to the standard CDL licensing fees, applicants must pay for a federal background check and fingerprinting. The exact amount may vary, so it's recommended to check the current fees with the Kentucky Transportation Cabinet or the agency administering the endorsement.
Yes, background checks and security clearances are mandatory for the CDL Hazmat endorsement. This is to ensure that drivers are responsible and trustworthy to handle hazardous materials. The Transportation Security Administration (TSA) conducts a federal background check, which includes checking criminal, immigration, and FBI records.
Yes, specialized training is required for the CDL Hazmat endorsement. You'll need to pass the Hazardous Materials Endorsement Knowledge Test. Additionally, certification involves a federal security threat assessment and fingerprinting for a background check. The process ensures drivers are equipped with the necessary knowledge and are safe to transport hazardous materials.
No, you cannot transport hazardous materials without a valid CDL Hazmat endorsement. In Kentucky, like in all other states, federal law mandates that drivers transporting hazardous materials must hold a CDL with a Hazmat endorsement. Driving without this endorsement can lead to serious penalties including fines and disqualification.
Yes, you can add the CDL Hazmat endorsement to your current CDL license. You don't need to apply for a new CDL. However, you must pass the Hazmat knowledge test, provide proof of U.S. citizenship or lawful permanent residency, and pass a TSA background check to add the endorsement.
