FREE CDL Class B Driving Test Online | Minnesota 2024
Train for FREE online with our Minnesota class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a MN CDL class B permit in 2021, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
50
40
20
1 . What is the purpose of a vehicle inspection report?
It provides a plan for the next five trips.
A vehicle inspection report allows a driver to inform the motor carrier of issues that could affect the safe operation of a vehicle. If required, the driver should fill out a vehicle inspection report after every day of driving. They should make note of any issues that could affect the safety of the vehicle or that could lead to a mechanical breakdown.
2 . A person should have a license for each state in which they plan to operate a CMV.
A person may not have more than one license. All states share driver data in a computer database to prevent the issuance of duplicate licenses.
3 . You should always be able to stop within:
A minute of hitting the brakes.
You should always make sure that your vehicle will be able to stop within the area of the road that you are able to see. This means that you must slow down whenever conditions reduce visibility.
4 . What should be done shortly after a tire has been changed?
The driver should inflate the tire.
After changing a tire, you should stop after driving for a while to recheck the tightness of the lug nuts.
5 . During an applied leakage test, the maximum leakage rate for a triple combination vehicle is:
4 psi in a minute.
It is important to know the maximum air loss rate that is safe for your specific vehicle. A triple combination should have a leakage rate no higher than 6 psi in a minute during an applied leakage test.
6 . A truck should be driven over a truck apron in a roundabout.
Truck aprons are often included on single-lane entries to roundabouts to allow for the off-tracking of turning trucks. A truck apron can also allow oversized and/or overweight vehicles to more easily navigate the intersection.
7 . ABS brakes:
The purpose of an Anti-Lock Braking System (ABS) is to prevent a vehicle's wheels from locking up when the driver brakes hard on a slippery surface.
2024 Minnesota | Frequently Asked Questions
A CDL Class B license in Minnesota allows the holder to operate single vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 pounds or more, or a vehicle towing another not exceeding 10,000 pounds. This includes buses, farm labor vehicles, and any vehicle designed to transport 24 passengers or more, including the driver.
A Class B CDL (Commercial Driver's License) in Minnesota allows the holder to operate single vehicles with a GVWR (Gross Vehicle Weight Rating) of 26,001 or more pounds, or any such vehicle towing another not in excess of 10,000 pounds. This includes straight trucks, large buses, segmented buses, and dump trucks with small trailers.
To acquire a Class B CDL license in Minnesota, you must be at least 18 years old (21 for interstate driving), have a valid Minnesota driver's license, pass a vision test, and successfully complete a knowledge test for the type of vehicle you plan to drive. Additionally, you must pass a skills test, which includes a pre-trip vehicle inspection, basic controls test, and on-road driving examination.
In Minnesota, you must be at least 18 years old to qualify for a Class B CDL license. However, it's important to note that while this age allows you to operate commercial vehicles within the state (intrastate), you must be at least 21 years old to drive commercial vehicles across state lines (interstate).
While not always necessary, specific endorsements may be required for a Class B CDL license in Minnesota depending on the type of vehicle you plan to drive or the cargo you intend to carry. These endorsements could include passenger, school bus, tanker, hazardous materials (HazMat), or combination vehicle endorsements. Each endorsement requires passing additional knowledge and skills tests.
The Class B CDL skills assessment in Minnesota encompasses three areas: pre-trip vehicle inspection, basic vehicle control, and on-road driving. The pre-trip inspection tests your ability to assess the safety of your vehicle. Basic control tests your ability to maneuver and control the vehicle. On-road driving tests your ability to safely operate the vehicle in various traffic situations.
Class B CDL license holders in Minnesota are restricted to operating vehicles under 26,001 lbs. They can't operate Class A vehicles unless they have the appropriate endorsements. Additionally, they may be limited by any restrictions noted on their license, such as "no air brake equipped vehicles", "automatic transmission only", or "no passengers" in commercial buses or vans.
Yes, in Minnesota, the written Class B CDL test is available in several languages other than English. However, federal regulations require that all CDL holders must be able to read and speak English sufficiently to converse with the general public, understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, you can request accommodations for the Class B CDL written exam if you have a disability. The Minnesota Department of Public Safety is committed to providing equal access to its services. Contact them directly or visit their website for information on how to request accommodations. It's advisable to make your request well in advance of your scheduled test date.
Yes, if you don't pass the Class B CDL written test in Minnesota, you can retake it. However, you must wait until the next day to retake the test. There is no limit to the number of times you can retake the test, but a retesting fee will be charged each time after the first two attempts.