Combination #1
Combination Vehicles Practice Test | Iowa 2024 #1
Train for FREE online with our Iowa CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a IA combination license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
1 . The best way to recognize that your trailer has started to skid is by:
The easiest way to become aware that your trailer has begun to jackknife is to observe it in your mirrors. Checking your trailer in your mirrors will also allow you to spot any skidding at the earliest possible moment.
2 . In a vehicle equipped with an automatic tractor protection valve, the valve will pop out when air pressure drops to a level between:
In vehicles equipped with an automatic tractor protection valve, the valve will pop out if air pressure drops to a level between 20 and 45 psi. When the valve pops out, the protection valve will close, stopping the flow of air.
3 . Fully-loaded rigs:
Fully-loaded rigs are more vulnerable to rolling over than empty rigs because the weight of the cargo gives the vehicles higher centers of gravity.
4 . Keeping cargo centered on a rig can:
A rollover is more likely if cargo is unevenly loaded in a rig. To help prevent a dangerous rollover, it is important to keep a load as centered on the rig as possible.
5 . When you are pulling a trailer, the air supply control lever should be in its ____ position.
Tractor protection controls in older vehicles may be operated by levers instead of knobs. If an air supply control is set in its "normal" position, it is properly set for you to pull a trailer.
6 . Trailers built before ____ are not required to have spring brakes.
Trailers built before 1975 are not required to have spring brakes. When parking a trailer without spring brakes, be sure to use wheel chocks to prevent the trailer from rolling.
7 . What does an Anti-Lock Braking System (ABS) do?
An Anti-Lock Braking System (ABS) helps prevent wheel lockup during hard braking. If ABS detects impending lockup, it reduces braking pressure to a safe level.
2024 Iowa | Frequently Asked Questions
To acquire a CDL Tank endorsement in Iowa, you must have a valid Commercial Driver's License (CDL). You will need to pass the tank vehicle endorsement test, which includes questions about inspecting and driving tank vehicles, and safe driving rules. The test can be taken at any Iowa Department of Transportation Driver's License Service Center.
To obtain a CDL Tank license, you must have a valid Commercial Driver's License (CDL). You'll have to pass the Tank Vehicle Endorsement Test which covers topics like inspecting and driving tank vehicles, and rules for safe driving. It's also important to have a good driving record. The test is available at any Iowa Department of Transportation Service Center.
While specific training isn't legally required to obtain a CDL Tank endorsement in Iowa, it's highly recommended. This can help you pass the Tank Vehicle Endorsement Test. Experience isn't mandatory but practical knowledge of handling and driving tank vehicles can be beneficial. Nonetheless, you must have a valid Commercial Driver's License (CDL) before applying for the endorsement.
Yes, an additional written test is required to obtain a CDL Tank endorsement in Iowa. The Tank Vehicle Endorsement Test covers specific knowledge related to the inspection, operation, and safe driving of tank vehicles. The test is available at any Iowa Department of Transportation Service Center. Studying the CDL manual can be beneficial in preparing for this test.
The written test for a CDL Tank endorsement in Iowa includes subjects like inspecting tank vehicles, safe driving practices, understanding weight distribution, handling high center of gravity, managing surge, and emergency procedures. The test is designed to ensure drivers can safely operate tank vehicles and handle any potential issues that may arise.
During the CDL Tank endorsement assessment, various skills and maneuvers are assessed. These include inspecting the tank vehicle for safety, properly loading and unloading hazardous materials, understanding the specific regulations and procedures for transporting liquids or gases, managing vehicle stability, and demonstrating control while turning, backing up, and braking.
Yes, there are constraints for drivers with a CDL Tank endorsement in Iowa. They must adhere to stringent safety measures due to the high-risk nature of transporting liquids. This includes weight restrictions, special handling requirements, and specific emergency procedures. Additionally, they may be restricted from driving in certain areas or during specific weather conditions for safety reasons.
No, transporting liquid or gas materials without a valid CDL Tank endorsement is not permitted in Iowa. This endorsement is required to ensure that drivers have the necessary knowledge and skills to handle the unique challenges of transporting these types of materials, such as managing weight distribution and handling emergencies.
You can add a CDL Tank endorsement to your current license without needing a fresh application. However, you'll need to pass a specific knowledge test for the endorsement. It's advisable to prepare for the test using the state's CDL manual and possibly taking a training course. Once you pass, the Tank endorsement is added to your existing CDL.
Yes, there are specific regulations for handling hazardous materials with a CDL Tank endorsement in Iowa. Drivers must pass a HazMat endorsement test in addition to the tank vehicle test. They also need to undergo a federal background check. These measures ensure that drivers can handle potential risks associated with transporting hazardous materials safely and responsibly.