Air Brakes Endorsement Test | Wisconsin 2024 #1

Train for FREE online with our Wisconsin CDL air brake test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WI Class A/Class B driver license in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that the requirements for CDL may vary from state to state.

Number of Question 25

Passing Score 20

Number of Tests 20

1 . When you need to stop in an emergency, you should:

Lock the wheels and skid to a stop.

Stop in a way that keeps your vehicle in a straight line.

Stop in a way that turns your vehicle.

Expect your vehicle to slow down more quickly than usual.

If you need to make an emergency stop, you can use either the controlled braking method or the stab braking method. It's important to brake in a way that keeps your vehicle traveling in a straight line while still allowing you to turn, if necessary.

2 . If braking at a speed of 55 mph while driving on dry pavement, the brake lag can add ____ to your vehicle's total stopping distance.

32 feet

15 feet

50 feet

10 feet

The total stopping distance for vehicles equipped with air brakes is made up of four factors: perception distance, reaction distance, brake lag distance, and braking distance. When braking at a speed of 55 mph while driving on dry pavement, the brake lag can add around 32 feet to a vehicle's total stopping distance.

3 . What is removed when an air tank is drained?

Water and oil

Ammonia

Wood

Chlorine

In an air brake system, the air storage tanks are equipped with drains to allow water and compressor oil to be removed. The water and oil can damage the brakes if left to accumulate in the system.

4 . Vehicles with dual air brake systems:

Maintain full-capacity air pressure in the braking systems even when the vehicle is not running.

Maintain some air pressure in the braking systems when the vehicle is not running.

Must be run to build enough air pressure to brakes to operate properly.

Do not need time to build air pressure before a trip.

Before driving a vehicle with a dual air brake system, you must allow the air compressor time to build up at least 100 psi of air pressure in both the primary and secondary systems.

5 . If the spring brakes are on, you should:

Not use the brake pedal.

Press the accelerator.

Move the steering wheel.

Be especially careful because the brakes may fail.

You should not apply the brake pedal if the spring brakes are activated. The brakes could be damaged if they are subjected to the force of air pressure and the springs at the same time.

6 . How should you test the low pressure warning signal?

Engage and disable the parking brake.

Rapidly press and release the brake pedal.

Open the rear shut-off valves.

Uncouple and recouple all glad hands.

It is essential that your low pressure warning light functions properly. After allowing the system to charge, you can test the warning signal by rapidly applying and releasing the brake pedal. This will release air from the braking system and the warning signal should come on when pressure drops to a dangerous level.

Study tip:

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet

99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

2024 Wisconsin | Frequently Asked Questions

In Wisconsin, obtaining a CDL Tank Endorsement requires passing a written test. To prepare, study the Tank Vehicles section of the Wisconsin Commercial Driver's Manual. After studying, schedule a test at your local DMV. If you pass, you'll need to pay a fee to add the endorsement to your CDL. Remember, you must already have a valid CDL to qualify.

To obtain a CDL Tank license, you must first possess a valid Commercial Driver's License (CDL). Then, study the Tank Vehicles section of your state's Commercial Driver's Manual. You'll need to pass the written tank vehicle endorsement test at your local DMV. Lastly, pay the required fee to add the endorsement to your CDL.

While specific training or experience isn't legally required for a CDL Tank endorsement, it's highly recommended. Knowledge about handling tank vehicles, understanding the surge effect, and knowing safety procedures is crucial. Studying the Tank Vehicles section of the Commercial Driver's Manual thoroughly helps. However, practical experience or training can significantly improve your understanding and driving skills.

Yes, to obtain a CDL Tank endorsement, you need to pass an additional written test. This test covers specific knowledge related to the safe operation of commercial tank vehicles. It includes topics like vehicle inspection, driving techniques, and dealing with emergencies. The content for this test can be found in the Tank Vehicles section of the Commercial Driver's Manual.

The written test for the CDL Tank endorsement includes topics such as: the inspection and operation of tank vehicles, understanding the "baffled" and "unbaffled" tanks, managing the surge effect, handling high center of gravity, safe driving techniques, and responding to emergencies or hazardous conditions related to tank vehicles. The goal is to ensure safe and knowledgeable operation of tank vehicles.

The CDL Tank endorsement assessment primarily evaluates your knowledge rather than specific driving maneuvers. It focuses on understanding the unique handling of tank vehicles, managing surge, comprehending the differences between baffled and unbaffled tanks, and dealing with hazardous materials. Practical skills are usually assessed during the general CDL road test, not in the tank endorsement test.

Drivers with a CDL Tank endorsement must comply with federal and state regulations. They cannot drive tank vehicles without a valid CDL and the Tank endorsement. Additionally, if the tank vehicle is carrying hazardous materials, they must also have a Hazmat endorsement. Exceeding weight limits, failing to secure loads properly, or not following safety regulations can lead to penalties or loss of the endorsement.

No, you cannot transport liquid or gas materials in a tank vehicle without a valid Commercial Driver's License (CDL) with a Tank endorsement. This is a federal requirement and applies in all states, including Wisconsin. Violating this rule can lead to serious penalties, including fines and suspension of your CDL.

The CDL Tank endorsement can be added to your current commercial driver's license. You don't need a fresh application for a new license. However, you will need to pass a knowledge test specific to tank vehicles, and in some cases, a skills test may also be required. Once you pass, the Tank endorsement will be added to your existing CDL.

Yes, handling hazardous materials with a CDL Tank endorsement requires additional certifications. You must possess a Hazardous Materials (Hazmat) endorsement along with your CDL Tank endorsement. To get this, you'll need to pass a written test on federal and state regulations for transporting hazardous materials and undergo a federal background check.