Knowledge Test Class B #2

Class B Driving Test | Ohio 2024 #2

Train for FREE online with our Ohio class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OH CDL class B permit in 2024, practice as much as..

Train for FREE online with our Ohio class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a OH CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.

50
40
20

1 . If you’re unfamiliar with the area in which you must back up, you should:

Before backing up, you should get out of your vehicle and look at your line of travel. Check your clearance to the sides and overhead.

2 . The air compressor is connected to the:

The air compressor of an air brake system is connected to the engine through gears or a v-belt. The compressor may be air-cooled or cooled by the engine cooling system.

3 . A driver can have:

CMV operators may not possess more than one driver license.

4 . When starting an engine, oil pressure should come up to a normal level:

Look at your truck's gauges when starting the engine. The oil pressure in an engine should come up to a normal level within seconds of the vehicle's engine being started.

5 . If convicted of any traffic violations, excluding parking violations, you must:

If you are convicted of any kind of traffic violation, in any type of vehicle, you must notify your employer within 30 days. You must also inform your motor vehicle licensing agency of the violation within 30 days if the conviction happened in another jurisdiction. This rule does not apply to parking infractions.

6 . Which of the following is acceptable if found during a pre-trip inspection?

When inspecting your tires, verify that there is at least 4/32 of an inch of tread depth in every major groove on the front tires, and tread depth of at least 2/32 of an inch on the other tires. Tires on the same vehicle should all be the same size.

7 . What is a tire load?

Tire load is defined as the maximum safe weight that a tire can carry at a specified pressure.

Reduce your study time from hours to minutes with a DMV exam “Cheat Sheet”

99.2% of people who use the cheat sheet pass the FIRST TIME

Click Here
Full Cheat Sheet
99.2%

99.2% of people who use the cheat sheet pass the FIRST TIME

Search the best driving school in your neighbourhood