Combination #1
Combination Vehicles Practice Test | New Hampshire 2025 #1 Page 3 of 3
Train for FREE online with our New Hampshire CDL combination vehicle test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NH combination license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a combination license may vary from state to state.
20
16
20
15 . Pull out the trailer air supply control to test:
The landing gear.
Be sure to test the trailer emergency brakes before beginning a trip. After ensuring that the trailer rolls freely, you can test the emergency brakes by pulling out the trailer air supply control, or placing it in the "emergency" position. Pull forward slightly with the tractor and make sure the trailer does not move.
16 . After finishing a pre-trip inspection, you should:
Leave the rear shut-off valves open.
Before a trip, you should ensure that air reaches all air brakes on all trailers by opening up the rear emergency line and service line shut-off valves to listen for escaping air. Close both shut-off valves before beginning to drive.
17 . A shut-off valve:
Should always be open.
Shut-off valves are used in air supply lines to control the passage of air from one trailer to another. The rear shut-off valve should always be closed to prevent air from leaving the braking system.
18 . When entering or crossing traffic while driving a combination vehicle, it is especially important that you:
Let other drivers wave you into their lane.
Combination vehicles require more space on the road than other vehicles. When entering or crossing traffic while driving a combination vehicle, it is especially important that there is a large enough gap in traffic for you to safely do so.
19 . The service air line is often controlled by the foot brake and is attached to the ____ valves.
The service air line carries air and is controlled by either the foot brake or trailer hand brake. The service air line is attached to relay valves, which allow the trailer brakes to be applied quickly.
20 . The best way to recognize that your trailer has started to skid is by:
The easiest way to become aware that your trailer has begun to jackknife is to observe it in your mirrors. Checking your trailer in your mirrors will also allow you to spot any skidding at the earliest possible moment.
See the exact questions that will be on the 2025 New Hampshire DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.
2025 New Hampshire | Frequently Asked Questions
A CDL Class A license in New Hampshire is defined as a commercial driver's license that allows the holder to operate any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more, provided the towed vehicle(s) have a GVWR of more than 10,000 pounds. This includes tractor-trailers and truck and trailer combinations.
With a Class A CDL license in New Hampshire, you can operate vehicles such as tractor-trailers, truck and trailer combinations, tank vehicles, livestock carriers, and flatbeds. The license allows you to drive any combination of vehicles with a Gross Combination Weight Rating (GCWR) of 26,001 pounds or more.
To obtain a Class A CDL in New Hampshire, you must be at least 18 years old (21 for interstate driving), possess a valid New Hampshire driver's license, pass a vision test, and successfully complete a written knowledge test. Additionally, you must pass a skills test which includes a pre-trip vehicle inspection, a basic controls test, and an on-road driving examination.
In New Hampshire, you must be at least 18 years old to qualify for a Class A Commercial Driver's License (CDL) for intrastate driving, which means driving only within the state. However, to drive across state lines or handle hazardous materials, you must be at least 21 years old.
Specific endorsements are not required for a Class A CDL license, but they can provide additional privileges. For example, a Hazmat endorsement allows the transportation of hazardous materials, while a Tanker endorsement permits the operation of tank vehicles. These endorsements require additional written exams. The School Bus endorsement requires both written and skills tests.
The Class A CDL skills test in New Hampshire encompasses a pre-trip vehicle inspection to assess your ability to determine if your vehicle is safe to drive. You'll also undergo a basic controls test to evaluate your ability to control the vehicle. Lastly, you'll take an on-road driving examination to demonstrate your practical driving skills in various traffic situations.
Yes, Class A CDL license holders in New Hampshire may face restrictions based on their driving ability or the type of vehicle they tested in. For instance, if a driver takes the test in an automatic transmission vehicle, they'll be restricted to driving automatics. Other restrictions may relate to air brakes, passengers, or hazardous materials.
In New Hampshire, the written Class A CDL test is primarily offered in English. However, some locations may offer the test in Spanish. It's important to note that all CDL applicants must be able to read and speak English well enough to converse, understand traffic signs, respond to official inquiries, and make entries on reports and records.
Yes, individuals with disabilities can request accommodations for the Class A CDL written test in New Hampshire. The Division of Motor Vehicles is committed to complying with the Americans with Disabilities Act (ADA). Accommodations may include extended time, a quiet room, or a reader. Requests should be made in advance to ensure proper arrangements.
Yes, if you fail the Class A CDL written test in New Hampshire, you can retake it. However, you must wait ten days between each attempt. There's no limit to the number of times you can retake the test, but each attempt requires payment of a retest fee. It's advised to study thoroughly before retesting.
