Class B Driving Test | Nevada 2024 #2 Page 6 of 7
Train for FREE online with our Nevada class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a NV CDL class B permit in 2024, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.
36 . When backing, it is best to:
If you must drive in reverse, you should back up slowly and use the mirrors on both sides of your vehicle. Use a helper to monitor your blind spots whenever possible. You and the helper should agree on a signal for "stop."
37 . How can a person check for a leak in hydraulic brakes?
Check hydraulic brakes by pumping the brake pedal three times before applying firm pressure to the pedal for five seconds. The pedal should not move. If it does, there may be a leak or some other problem in the braking system.
38 . If a vehicle is found to be over-length during a pre-trip inspection, the driver should:
If a pre-trip inspection reveals a load to be oversize, the driver must confirm that all required signs, flags, lamps, and reflectors are safely and properly mounted, and that and all required permits are in their possession.
39 . Air tank drains:
In an air brake system, the air tanks are equipped with drains that allow water and compressor oil to be removed from the system. If allowed to build up, water and compressor oil can damage an air brake system.
40 . A slack adjuster should move no more than ____ from where it is attached to the push rod.
Before a trip, you should check each slack adjuster after parking, setting wheel chocks, and disengaging the parking brake. Pull the slack adjusters to make sure that they do not move more than about one inch from where the push rod is attached. If they move more than one inch, they may be out of adjustment and will need to be fixed.
41 . During a vehicle inspection, ensure that lug nuts are all of the following, except:
During a vehicle inspection test, you must ensure that all lug nuts are present, free of cracks and distortions, and showing no signs of looseness, such as rust trails or shiny threads. Verify that all bolt holes are free of cracks and distortions.
42 . Once stopped as a part of the stop/start maneuver, you should:
Once you have stopped as a part of the stop/start maneuver during the on-road driving skills test, you must activate your four-way flashers and shift into neutral or park. You must not block any driveways, intersections, fire hydrants, or signs.
See the exact questions that will be on the 2024 Nevada DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.
Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.