Knowledge Test Class B #2

Class B Driving Test | Georgia 2025 #2 Page 7 of 7

Train for FREE online with our Georgia class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a GA CDL class B permit in 2025, practice as much as.. Read More

Train for FREE online with our Georgia class B license test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a GA CDL class B permit in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that CDL class B requirements may vary from state to state.

50
40
20
To Pass

43 . To inspect slack adjusters on S-cam brakes, you need to:

Chock the wheels and disengage the parking brake. Check each slack adjuster after parking on level ground, setting wheel chocks, and disengaging the parking brake. Pull the slack adjusters to make sure they do not move more than about one inch from where the push rod is attached. If they move more than one inch, they may be out of adjustment and will need to be fixed.

44 . When entering a foggy area, you should:

Use your high beam headlights. Always slow down before entering a foggy area. Use low beam headlights, avoid passing others, and avoid stopping on the side of the roadway. It is safest to completely avoid driving under foggy conditions, if possible.

45 . What is the average driver’s reaction time?

Two seconds The average driver has a reaction time of between three-quarters of a second and one second.

46 . When inspecting engine compartment belts during the vehicle inspection test:

The applicant must identify which items are not belt-driven, if any. When checking the engine compartment during the vehicle inspection test, you must check the power steering, water pump, alternator, and air compressor belts. In addition to cracks and frays, you should check the belts for snugness, allowing up to three-quarters of an inch of play at the center of each belt. If any of these items are not belt-driven, you must identify them and ensure that their components are operating properly, are not damaged or leaking, and are mounted securely.

47 . Distracted driving:

Can be avoided by not engaging in complex conversations while driving. To reduce the risk of distraction, do not engage in complex or emotionally intense conversations while driving. Pre-programming radio stations before your trip and avoiding eating, drinking, or smoking while at the wheel can also help you avoid becoming distracted while driving. Remember that mental distractions that take your attention away from the task of driving can be just as dangerous as physical distractions.

48 . If a vehicle has a vehicle inspection report, the driver:

Should not conduct a pre-trip inspection and rely only on the report. For the first step of a vehicle inspection, you should review the last inspection report on your vehicle, if there is one. The carrier should have repaired any problems noted on the report.

49 . During a pre-trip inspection, belts in the engine compartment should be:

Left alone and not inspected. During a pre-trip inspection, belts in the engine compartment should be checked for tightness and excessive wear.

50 . Off-ramps:

Should be used only if following another vehicle. The combination of slopes and curves can make freeway on- and off-ramps dangerous for trucks. Remember that posted speed limits on ramps may be safe to be driven by cars but too fast to be driven by large or heavily-loaded vehicles.

See the exact questions that will be on the 2025 Georgia DMV exam.

99.2% of people who use the cheat sheet pass the FIRST TIME

Lillian MCcranie explains how our CDL study guide was helpful in passing the exam and recommends it to everyone.

Cameron tells us how he purchased the CDL exam, and found it to be a useful tool which helped him pass the exam and find a job.

2025 Georgia | Frequently Asked Questions

To acquire a CDL Hazmat endorsement in Georgia, you must possess a valid Commercial Driver's License (CDL). Next, pass the Hazardous Materials Endorsement Knowledge Test at a DDS Customer Service Center. Finally, submit to a federal background check and fingerprinting by the Transportation Security Administration. Remember to pay required fees for application and fingerprinting.
To obtain a CDL Hazmat license, you must have a valid Commercial Driver's License (CDL). You must also pass the Hazardous Materials Endorsement Knowledge Test. Additionally, you're required to undergo a federal background check and fingerprinting by the Transportation Security Administration. You must be a U.S. citizen or have legal status, and you should have a clean driving record.
When applying for a CDL Hazmat endorsement, you are required to provide proof of U.S. citizenship or lawful permanent residency. This can be a U.S. passport, birth certificate, or green card. You'll also need your current valid Commercial Driver's License (CDL). Remember to bring documentation for any name changes and payment for the application and fingerprinting fees.
Yes, there is a dedicated written test for the CDL Hazmat endorsement. This test is designed to assess your knowledge of hazardous materials transportation regulations, such as safe loading, unloading, and transport. The test typically includes questions about identifying different types of hazardous materials and understanding emergency procedures. You must pass this test to receive the endorsement.
The written test for the CDL Hazmat endorsement covers a range of topics related to hazardous materials. These include identifying different types of hazardous materials, understanding shipping papers, recognizing placards and labels, handling emergencies, loading and unloading procedures, and understanding the rules for transporting hazardous materials safely.
Yes, there are additional costs associated with obtaining a CDL Hazmat endorsement. These include a fee for the knowledge test, a fingerprinting fee for the TSA background check, and a fee for adding the endorsement to your CDL. The exact amount can vary, so it's best to check with your local DMV for the most accurate information.
Yes, obtaining a CDL Hazmat endorsement requires a Transportation Security Administration (TSA) background check. This includes a review of criminal, immigration, and FBI records. It is meant to ensure that drivers who transport hazardous materials pose no security threat. The process involves fingerprinting and a fee, and it must be completed before the endorsement is granted.
Yes, specialized training is required for the CDL Hazmat endorsement. This includes passing a written knowledge test about hazardous materials regulations and safety procedures. Additionally, a TSA background check is required, but no specific certification beyond the endorsement on your CDL is necessary.
No, you cannot legally transport hazardous materials without a valid CDL Hazmat endorsement in Georgia. This endorsement ensures that the driver has the necessary knowledge and skills to safely handle and transport hazardous materials. Violating this requirement can lead to severe penalties, including fines and suspension of your commercial driver's license.
You can add the CDL Hazmat endorsement to your current CDL license. This involves passing a written knowledge test and a TSA background check. You don't need to apply for a new CDL, but you must go through the endorsement process with the Georgia Department of Driver Services.

Wait, before you go

Ace Your Georgia CDL Written Test with our Guaranteed Cheat Sheet

See the exact questions that will be on the 2025 Georgia DMV exam.