Double #1
Double Triple Test | Washington 2025 #1 Page 2 of 3
Train for FREE with our Washington CDL double triple practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a WA CDL double triple license in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements may vary from state to state.
20
16
20
8 . A dual air brake system:
A dual air brake system is made up of two separate air brake systems. The systems share a single set of brake controls, but each has its own air tanks, hoses, and lines. One system typically operates the regular brakes on the rear axle or axles while the other system operates the regular brakes on the front axle.
9 . When backing with a trailer, turning toward the driver’s side is encouraged because:
When driving in reverse, it is always recommended that a driver backs their vehicle toward its left side. This will allow the driver the best possible view of the rear of their vehicle.
10 . When traveling down a downgrade, the speed of a vehicle will likely:
The force of gravity will cause a vehicle's speed to increase when traveling downhill.
11 . When inspecting your vehicle, you should check for all of the following, except:
During a pre-trip inspection, you should verify that the air pressure is neither too low nor too high in any of your tires.
12 . When starting from a complete stop, a vehicle should:
To avoid hitting vehicles behind you, you must ensure that your vehicle will not roll backward when you start moving forward from a stopped position.
13 . A broken exhaust system:
A broken exhaust system can let poisonous fumes into a vehicle's cab or sleeper berth. Be sure to inspect your exhaust system for any loose, broken, or missing parts.
14 . Regrooved tires are:
Regrooved, recapped, or retreaded tires are not permitted to be used on the front of a bus.
2025 Washington | Frequently Asked Questions
To obtain a CDL Tank endorsement in Washington, you first need a Commercial Driver's License (CDL). Then, study the "Transporting Cargo Safely" section of the Washington CDL manual. After studying, take the written tank vehicle test at a Department of Licensing office. If you pass, the tank endorsement will be added to your CDL.
To obtain a CDL Tank license, you first need a basic Commercial Driver's License (CDL). You then need to study the relevant sections of your state's CDL manual, focusing on transporting cargo safely. After studying, you must pass a written tank vehicle test at your local Department of Licensing office. Once passed, the tank endorsement is added to your CDL.
While specific training or experience isn't legally required to obtain a CDL Tank endorsement in Washington, it's advisable to study the "Transporting Cargo Safely" section of the CDL manual thoroughly. Experience driving similar vehicles can also be beneficial. Ultimately, you must pass a written tank vehicle test at a Department of Licensing office.
Yes, an additional written knowledge test is required for the CDL Tank endorsement. The test focuses on the specific knowledge needed to safely operate tank vehicles. This includes understanding the vehicle's handling characteristics, inspecting tank vehicles, and recognizing hazards. Studying the Commercial Driver Guide provided by the Washington State Department of Licensing will help prepare for this test.
The written test for the CDL Tank endorsement covers various topics related to safely transporting liquids and gases. Subjects include understanding bulk tank loading, unloading, and inspecting procedures, recognizing the dangers of surge, handling high center of gravity, and knowing how to control internal tank pressure among others. It's crucial to study these areas thoroughly.
The CDL Tank endorsement assessment primarily focuses on knowledge rather than specific maneuvers. You'll be tested on understanding of safe loading and unloading procedures, handling of surge, control of internal tank pressure, and awareness of high center gravity risks. Practical driving skills are typically assessed during the general CDL skills test rather than the tank endorsement test.
Drivers with a CDL Tank endorsement must adhere to specific regulations and safety guidelines when transporting liquids or gases. They must understand the unique risks associated with this type of cargo, such as surge and high center of gravity. However, they are not restricted from driving other types of commercial vehicles unless there are additional endorsements or restrictions on their license.
No, a valid CDL Tank endorsement is required to transport liquid or gas materials in the United States. This endorsement ensures the driver has the necessary knowledge and skills to handle such materials safely. Driving without the proper endorsement can result in legal penalties, including fines and suspension of driving privileges.
The CDL Tank endorsement can be added to your current CDL. You don't need a fresh application for a new license. However, you will need to pass a knowledge test related to tank vehicle operation. Once you pass the test, the endorsement will be added to your existing CDL.
Yes, to handle hazardous materials with a CDL Tank endorsement, drivers must also have a Hazardous Materials (HazMat) endorsement. They must pass a written test regarding the safe transportation of hazardous goods and undergo a federal background check. Understanding safety protocols, emergency procedures, and federal regulations is crucial for handling these materials.