FREE Online Bus Driver Testing | Washington 2024 Page 2 of 3
Train for FREE online with our WA bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Washington in 2021, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
8 . If you come to railroad tracks while driving a school bus, you should generally:
In general, school bus drivers should stop before any railroad crossings to check the tracks for approaching trains. Drivers should stop no closer than 15 feet and no farther than 50 feet from the nearest rail in order to have the best view of the tracks. They should look and listen for approaching trains before proceeding through the crossing.
9 . If exiting a bus, a driver must:
When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic vehicle control skills test.
10 . A school bus's danger zones are located:
The danger zones of a school bus are areas in which children are most likely to be hit, either by another vehicle or by the bus itself. Such areas are located to the front, sides, and rear of a bus. Danger zones can extend 10 feet from every side of a bus.
11 . When boarding a school bus, students should:
Students should board a school bus slowly and in a single-file line. For safety, boarding students should use the handrail.
12 . The inside rearview mirror is used to:
The overhead inside rearview mirror in a school bus is used to monitor passenger activity inside the bus.
13 . During the driving test, the examiner will be scoring you on:
During the on-road driving test, the examiner will be scoring you on specific driving maneuvers, as well as your general driving behavior.
14 . When students board a school bus, the driver should:
While students are boarding a school bus, the driver should supervise the loading while watching all mirrors for any students running to catch the bus.
Search the best driving school in your neighbourhood
2024 Washington | Frequently Asked Questions
A CDL Class B license in Washington allows the holder to operate single vehicles with a Gross Vehicle Weight Rating (GVWR) of 26,001 or more pounds, or any such vehicle towing another not exceeding 10,000 pounds. This typically includes buses, dump trucks, tow trucks, delivery trucks, and straight trucks.
A Class B CDL license allows you to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or a vehicle of this size towing another not exceeding 10,000 pounds. You can drive buses, dump trucks, tow trucks, delivery trucks, garbage trucks, and straight trucks with this license.
To acquire a Class B CDL license in Washington, applicants must be at least 18 years old (21 if intending to drive interstate), possess a valid Washington state driver's license, pass a vision test, and successfully complete both a knowledge test and skills test. They also must provide proof of U.S. citizenship or lawful permanent residency.
In Washington, you must be at least 18 years old to qualify for a Class B CDL license. However, please note that you must be 21 years old or older if you intend to drive commercial vehicles across state lines (interstate driving).
Specific endorsements aren't necessary for a Class B CDL license, but they can broaden your driving opportunities. Endorsements like H (Hazardous Materials), N (Tank Vehicles), P (Passenger Transport), and S (School Bus) require additional knowledge tests. The T endorsement for double/triple trailers isn't applicable to Class B.
The Class B CDL skills assessment in Washington includes three parts: pre-trip inspection, basic vehicle control, and on-road driving. You'll need to demonstrate knowledge of your vehicle's components, show you can control your vehicle in various situations, and prove you can safely drive in normal traffic conditions.
Yes, Class B CDL license holders in Washington are limited to driving vehicles under 26,001 pounds or towing vehicles that do not exceed 10,000 pounds. They can't operate Class A vehicles unless they upgrade their license. Also, they can't drive vehicles requiring special endorsements unless they pass additional tests.
Yes, in Washington, the written Class B CDL test is available in multiple languages. However, federal regulations require all commercial drivers to read and speak English well enough to converse with the general public, understand traffic signs and signals, respond to official inquiries, and make entries on reports and records.
Yes, in Washington, if you have a disability that requires special accommodations for the Class B CDL written exam, you can request them. Accommodations may include Braille or large print exams, oral exams, or extra time. Be sure to make your request well in advance to allow for arrangements.
Yes, if you don't pass the Class B CDL written test in Washington, you can retake it. However, you must wait at least three days before attempting the test again. You'll need to pay a retesting fee each time. Remember to study thoroughly before retaking to increase your chances of passing.
