Bus #1
Bus Driver Testing | Texas 2026 #1 Page 3 of 3
Train for FREE online with our TX bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Texas in 2026, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
22
15 . If your bus's Anti-Lock Braking System (ABS) stops working:
You should not brake.
If its Anti-Lock Braking System (ABS) is not working, a vehicle will still retain its normal braking power. The driver should continue to drive and brake in a normal fashion.
16 . The overhead inside mirror should be adjusted to see:
In front of the bus.
The top portion of the overhead inside rearview mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.
17 . When checking the power steering fluid during a vehicle inspection, you will need to do each of the following, except:
Ensure that the power steering level is above the refill mark.
When checking the power steering fluid during the vehicle inspection test, you must be able to indicate where the power steering fluid dipstick is located and show that there is an adequate amount of power steering fluid in the engine compartment. The fluid level must be above the refill mark.
18 . When approaching students at a bus stop, you should stop:
About 80 feet away from the students.
When approaching a bus stop, a school bus driver should come to a full stop at least 10 feet away from the waiting students. By forcing the students to walk to the bus, the driver is better able to keep an eye on their movements and location.
19 . During the straight line backing exercise, how many times are you permitted to exit the vehicle to check its position?
Four times
During the straight line backing exercise, you are permitted to exit your vehicle to check its position no more than one time.
20 . What do outside crossover mirrors allow a driver to see?
The left side of the bus
Crossover mirrors are used to help a school bus driver see the danger zone area directly in front of the bus, as well as the danger zone areas to the left and right sides of the bus, including the area from the front of the bus to the service door.
Search the best driving school in your neighbourhood
2026 Texas | Frequently Asked Questions
A CDL Class B license in Texas allows the holder to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or any such vehicle towing another not exceeding 10,000 pounds. This includes buses, farm labor vehicles, and any combination of vehicles that are not Class A vehicles.
A Class B CDL license in Texas allows the holder to operate vehicles such as straight trucks, large buses, segmented buses, box trucks, dump trucks with small trailers, and tractor-trailers. However, it is important to note that any trailer being towed must not exceed a gross vehicle weight rating of 10,000 pounds.
To acquire a Class B CDL license in Texas, applicants must be at least 18 years old (21 for interstate driving), possess a valid Texas driver's license, pass a vision exam, and successfully complete a knowledge test. They must also pass a skills test, which includes a pre-trip vehicle inspection, a basic vehicle control test, and an on-road driving examination.
In Texas, you must be at least 18 years old to qualify for a Class B Commercial Driver's License (CDL) for intrastate driving (within Texas only). However, if you intend to drive across state lines (interstate driving), federal regulations require you to be at least 21 years old.
While not always necessary, specific endorsements can be added to a Class B CDL license in Texas to allow for the operation of special types of vehicles. These include passenger (P), school bus (S), and tanker (N) endorsements. Each endorsement requires additional knowledge tests, and some also require a skills test.
The Class B CDL skills assessment in Texas includes three parts: a pre-trip vehicle inspection to check your understanding of your vehicle and its operation, a basic controls test to assess your ability to control the vehicle, and a road test to evaluate your on-road driving skills in various traffic situations and environments.
Yes, there are limitations for Class B CDL license holders in Texas. They are permitted to operate single vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, or tow a vehicle not exceeding 10,000 pounds GVWR. However, they cannot operate Class A vehicles unless they upgrade their license.
In Texas, the written Class B CDL test is primarily offered in English. However, Spanish versions are available. Please note that all CDL applicants must pass an English proficiency test, as federal regulations require all CDL holders to read and speak English sufficiently to communicate with the general public, understand highway traffic signs and signals, and respond to official inquiries.
Yes, the Texas Department of Public Safety (DPS) provides reasonable accommodations for individuals with disabilities during the Class B CDL written exam. You need to request these accommodations in advance. Contact your local DPS office for more information about the process and to discuss your specific needs.
Yes, if you don't pass the Class B CDL written test in Texas, you can retake it. However, you will need to wait at least one day before retesting. Keep in mind that additional fees may apply each time you retake the test. It's recommended to study thoroughly and use available practice tests to increase your chances of passing on the next attempt.
