Passenger #1
Passenger Endorsement | Tennessee 2025 #1 Page 3 of 3
Train for FREE with our Tennessee CDL passenger endorsement practice test online. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a TN DMV passenger endorsement in 2025, practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for issuing a CDL permit with passenger endorsement may vary from state to state.
20
16
20
15 . When performing the stop/start maneuver as a part of the skills test, you should:
Decelerate smoothly.
During the on-road driving skills test, you will be asked to pull your vehicle over to the side of the road and stop as if you were going to get out and check something on your vehicle. As you prepare to make this stop, you must check traffic; activate your turn signal; decelerate smoothly with even braking, changing gears as needed; and bring your vehicle to a full stop without coasting.
17 . A high center of gravity:
Improves fuel efficiency.
A high center of gravity makes a vehicle more likely to tip over.
18 . Before starting a trip, you need to check the ____ to ensure that it is in proper working condition.
Parking brake
Before starting on a bus trip, you should verify that key vehicle systems are in proper working order. Your inspection should include a check of the parking brake, lights, and reflectors.
19 . Driving with a cargo of hanging meat in a trailer:
An operator should drive with care when transporting a cargo of hanging meat. Such a load is unstable, both because it has a high center of gravity and because the swinging of the meat can affect the driver's handling of the vehicle.
20 . When exiting a vehicle, it is important to maintain ____ with your vehicle at all times.
As you exit your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
2025 Tennessee | Frequently Asked Questions
In Tennessee, to acquire a CDL Tank endorsement, you must first have a Commercial Driver's License (CDL). Then, you need to pass the Tank Vehicle written test. You can prepare for this test by studying the related section in the Tennessee Commercial Driver’s License Manual. After passing the test, you pay a fee to add the endorsement to your license.
To obtain a CDL Tank license in Tennessee, you must have a Commercial Driver's License (CDL). Next, you need to pass the Tank Vehicle written test, which includes questions about inspecting and driving tank vehicles, and safe driving rules. The Tennessee Commercial Driver’s License Manual can help in preparation. After passing, pay the required fee to add the endorsement.
While specific training or experience isn't legally mandatory to obtain a CDL Tank endorsement in Tennessee, it's highly recommended. Knowledge of inspecting and driving tank vehicles, and understanding safe driving rules is crucial. This information can be found in the Tennessee Commercial Driver’s License Manual. Practical experience or training can be beneficial for passing the Tank Vehicle written test.
Yes, to obtain a CDL Tank endorsement in Tennessee, you must pass an additional written test. This test covers specific knowledge related to the safe transport of liquid and gaseous materials. Studying the Tank Vehicle section of the Tennessee CDL manual will help prepare you for this exam.
The written test for the CDL Tank endorsement in Tennessee covers several subjects, including inspecting tank vehicles, driving tank vehicles, and safe driving rules. It may also include questions about handling high center of gravity, surge, outbound inspection, special purpose equipment and operation, and emergency controls. The Tennessee Commercial Driver’s License Manual provides comprehensive information on these topics.
The CDL Tank endorsement assessment in Tennessee primarily tests your knowledge rather than specific skills or maneuvers. The written exam focuses on understanding safe driving rules, inspecting tank vehicles, and driving tank vehicles. It might cover handling high center of gravity, surge, outbound inspection, and emergency controls. Practical skills are typically assessed during the general CDL driving test.
Yes, drivers with a CDL Tank endorsement in Tennessee must adhere to certain regulations. They must not exceed the weight limit for their vehicle, maintain logbooks of hours driven, and follow safety protocols for transporting hazardous materials. Additionally, they must pass regular drug and alcohol tests and maintain a clean driving record. Failure to comply can result in fines, suspension, or loss of the endorsement.
No, transporting liquid or gas materials without a valid CDL Tank endorsement in Tennessee is illegal. This endorsement is required to operate a commercial motor vehicle designed to transport any liquid or gaseous materials within a tank attached to the vehicle. Violation of this rule can lead to severe penalties, including fines and suspension of the driver's CDL.
Yes, you can add a CDL Tank endorsement to your current license in Tennessee. You don't need a fresh application. However, you must pass a knowledge test specific to transporting liquids or gases in a tank. Once you pass the test and pay the required fee, the endorsement will be added to your existing Commercial Driver's License (CDL).
Yes, to handle hazardous materials with a CDL Tank endorsement in Tennessee, drivers must also have a Hazardous Materials (HazMat) endorsement. This requires passing an additional knowledge test, a TSA background check, and fingerprinting. It's vital to follow these regulations for safety and to avoid legal repercussions.