Bus #1
Bus Driver Testing | Pennsylvania 2026 #1 Page 3 of 3
Train for FREE online with our PA bus CDL test. The official exam test consists of several obligatory parts, with all of them checking your knowledge of different blocks of road rules. If you need to obtain a license in Pennsylvania in 2026, learn how to become a bus driver and then practice as much as possible. Free sample tests published on our website will help you check and improve your knowledge and boost your grades. Please bear in mind that DMV requirements for a bus driver may vary from state to state.
20
16
20
15 . Before operating a school bus, ____ should be checked.
The inside mirror
It is essential that school bus drivers check all of the bus's mirrors before operating the vehicle. You should always have a maximum viewing area that is consistent with Federal Motor Vehicle Safety Standards. If necessary, have the positioning of the mirrors adjusted.
16 . There are blind spots ____ left and right side flat mirrors.
To the left of
There are blind spots immediately below and in front of each outside flat mirror. These mirrors have another blind spot directly behind the rear bumper.
17 . If a student drops an item near a stopped bus, they should:
Have another student pick it up.
It is dangerous for students to retrieve dropped items because doing so could cause them to disappear from the driver's view at a crucial moment. If an item is dropped, the student should get out of the bus's danger zones, get the attention of the driver, and ask the driver to retrieve the item.
18 . When performing the stop/start maneuver as a part of the skills test, you should:
Decelerate smoothly.
During the on-road driving skills test, you will be asked to pull your vehicle over to the side of the road and stop as if you were going to get out and check something on your vehicle. As you prepare to make this stop, you must check traffic; activate your turn signal; decelerate smoothly with even braking, changing gears as needed; and bring your vehicle to a full stop without coasting.
19 . During a basic vehicle control skills test, you may be asked to:
Pull forward into a parking space.
Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.
20 . Your vehicle's final position should be:
Within two feet of the final position described by the examiner.
You should finish each exercise with your vehicle in the exact position described by the examiner. You can be penalized for failing to complete an exercise exactly in the manner described by the examiner, potentially resulting in failure of the basic control skills test.
2026 Pennsylvania | Frequently Asked Questions
To acquire a CDL Tank endorsement in Pennsylvania, you must first have a Commercial Driver's License (CDL). Then, study for the tank endorsement test using the Pennsylvania CDL handbook. Schedule and pass the test at a PennDOT Driver License Center. A passing score is 80% or higher. After passing, pay the required fee to add the endorsement to your CDL.
To obtain a CDL Tank license in Pennsylvania, you need to have a valid Commercial Driver’s License (CDL) first. Then, pass the Tank Vehicle (N) endorsement knowledge test that covers the specific knowledge required for safe operation of tank vehicles, including topics like handling high center of gravity and inspecting tank vehicles.
While Pennsylvania doesn't require specific training or experience for a CDL Tank endorsement, it's recommended to prepare for the knowledge test. This can be done through self-study or enrolling in a training program. Practical experience driving tank vehicles under supervision can also be beneficial. Remember, you must already hold a CDL to add this endorsement.
Yes, to obtain a CDL Tank endorsement in Pennsylvania, you must pass the Tank Vehicle (N) endorsement knowledge test. This written exam focuses on the specific knowledge needed for the safe operation of tank vehicles, including understanding the high center of gravity and how to inspect such vehicles.
The written test for the CDL Tank endorsement covers various subjects including inspecting tank vehicles, understanding the differences between baffled and unbaffled tanks, driving tank vehicles safely, and handling emergencies. It also includes understanding how liquid surge affects vehicle handling. The aim is to ensure drivers can safely handle large, often hazardous, liquid loads.
The CDL Tank endorsement does not typically involve a specific skills or maneuvers assessment. It primarily requires passing a written knowledge test. This test covers subjects like high center of gravity, safe operation, inspecting tank vehicles, and the effects of surge. However, overall CDL skills are assessed during the general CDL road test.
Yes, drivers with a CDL Tank endorsement must adhere to certain rules and regulations. For instance, they must follow all safety protocols for handling and transporting liquid materials. Also, if the tank is not baffled, the vehicle's movement can be affected due to liquid surge. Violation of these rules can lead to penalties or even loss of the CDL Tank endorsement.
No, it is illegal to transport liquid or gas materials in a tank vehicle without a valid CDL Tank endorsement in Pennsylvania. The endorsement ensures that the driver has the necessary knowledge and skills to handle such materials safely. Violating this rule can lead to serious penalties, including fines and loss of commercial driving privileges.
In Pennsylvania, you can add a CDL Tank endorsement to your current commercial driver's license. You do not need to apply for a new license. However, you will have to pass a knowledge test specific to tank vehicles and pay the required fees to add the endorsement to your existing CDL.
Yes, there are specific regulations and prerequisites in place for handling hazardous materials with a CDL Tank endorsement in Pennsylvania. These include passing a written test on hazardous materials, undergoing a background check, and completing a TSA threat assessment. Additionally, drivers must follow federal regulations regarding the transportation, labeling, and placarding of hazardous materials.